Reviews
OEM replace part Perfectly fitted
This is originla spare part use in midland pro mounting.Its along with original 3m double tape.including with alen key also.Make sure befor you past bracket, clean helmet suface properly. perfecy fitted on surface.recomenderd for who loking for mounting part for midland pro. View detail
Good Original
After chage the helmet I'm looking for this part for mount speaker and mic. Used with midland pro.good one with thicker velver.excatly size same. Fast shipping .Thanks webike View detail
for casual use
I bought it for a short ride, and it is convenient when I stop at convenience stores for a short break during soloTwo. View detail
Parenthesis good!
I put it on Master Cylinder as soon as it arrived.... (Lol)
The Large size is just right and the texture is very nice!
View detail
Off car Transporter group standard
This is the standard Ladder for the Off Car Transporter group.
With this, you can put an Off car on a High ace, light truck, or whatever.
One thing to note is the load capacity.
I believe that Racer and TRAIL up to 250cc are intended to be loaded with this Ladder.
It is better to purchase a heavy-duty aluminum ladder for loading TENEREetc.
(I saw this product with a bent board at a nearby UpXrage, but I think that's probably what happened…)
Also, I think Off cars are a bit hard for Minimoto under 14Inch even if they are Off cars.
For vehicles with a small tire diameter, the tire will be stuck in the space between the ladder boards, so loading will require more force.
As for specific models, the KLX125 can be loaded without difficulty, but the KSR Pro is a little too large. But the KSR Pro is a little too large.
In the meantime, if you want to load an Off car, this is the one to buy.
View detail
Fits: BMW R1200ST K28 (05/2003-11/2007), BMW R1200R K27, BMW F800ST K71 (10/2011-07/2018), BMW F800S K71 (10/2011-07/2018), BMW F800R K73 (11/2013-07/2018), BMW F800GT K71 (10/2011-07/2018)
It is a good item
Good quality product.
It also arrived earlier than the due date.
View detail
Just a good Size
It is about the same length as the kawasakiMotorcycle key. View detail
Use with Motorcycle
Purchased for use with DCR in Motorcycle
You will also need a PTT and a speaker microphoneCable.
It can also be used for HandyMicrophone!
View detail
Fits: KAWASAKI ZXR250R, KAWASAKI Z400FX, KAWASAKI ZXR-II, KAWASAKI GPz400S, KAWASAKI GPz400R, KAWASAKI EX-4, KAWASAKI GPz250, KAWASAKI 250TR, HONDA REBEL, HONDA HORNET600, HONDA BROS2, HONDA BROS1, HONDA XELVIS, HONDA JADE・Night Hawk, HONDA VTR, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250R, HONDA GB250 CLUBMAN, HONDA CD250U
Necessary and sufficient price
[How is it used?
I purchased this for use on my YAMAHA/TZr50R.
This time, I chose the Large size, but it was much too large for TZr50R.
However, we wanted to be able to use it on the XJR400, so we selected the Large size.
Was the one you received as per Image?
It was just like the Image. I had previously purchased a camouflage pattern Ver. from the same Manufacturer, so this is a Repeat item.
But as for Material, is it a little cheaper? Thinner? I felt it was a bit thin.
How was your experience with it?
The material is a little thin, but I am satisfied as long as it keeps out the wind and rain.
The method of covering over a slightly higher Cover is also good because of its low price.
That way, both will last longer.
[Points to note]
Since the material is thin, it may not be that durable. Also, there is a possibility that it may melt in hot engines, etc., so it is recommended to cover it after it has cooled down sufficiently.
How did it compare to other products?
Other products in the same price range do not have a 2-tone Mirror section, or do not have a hole for the lock wire.
I think this product is a very good deal because it is inexpensive and has both.
View detail
Versatile Headlight.
[How is it used?
I bought it for camping, maintenance & work without light, and also to have a light source at work.
At the time of purchase, I was at work. Let's buy a bright Headlight. I remember that I bought it in the heat of the moment... I am surprised at myself for purchasing such an expensive Light at that time.
How did you like it?
The performance is good for an expensive product.
The brightness can be adjusted in three levels:750 Lumen in HighMODE, 300 Lumen in MidMODE, and 30 Lumen in EcoMODE.
It is also a good point that you can work without worrying about the time because it can be used for 10 hours in High, 22 hours in Mid, and 82 hours in Eco, respectively, with a full charge.
How did it compare to other products?
This type of product comes out later and later with higher performance, but so far we have no complaints about this product.
As of 2024, brighter and longer-lasting products are now on the market, and the price is usually reduced accordingly, making it easier to purchase. "When I want something, I need to check the market and see which products are in line with what I'm looking for." Please take a close look at the
[Points to note]
This Headlight can use either AA Alkali batteries×4 or dedicated Lithium ion rechargeable batteries 3.6V 6400mAh, but the dedicated Lithium ion rechargeable batteries are said to have a longer irradiation time.
I use NiCad AA batteries for recharging in conjunction with my work, but I still get longer use out of them when using the dedicated rechargeable batteries.
This is the promise of this kind of Light, "Do not irradiate the human eye." Please make sure to observe this rule.
Other items that would be helpful
The deciding factor in the purchase
As I mentioned above. The groove of the workplace at the time." I bought it at, why not? I want a bright Headlight." And they each bought a high-performance Headlight.
I am still using it on the front line and it is still active, but I cannot afford such a high-end Headlight today.
[How is it used?
It is very useful for vehicle maintenance outside of the garage, when touring, and when working at the office in between.
【Included Parts:presence or absence】.
Non-slip head band and spare head band (with non-slip surface) and Silicon band (4 Buckles) and 4 helmet holders, plus Micro USB Cable (50cm) and a dedicated rechargeable battery.
Included Parts:is also gorgeous because of its high price.
[ITEMS TO BUY TOGETHER
The Silicon band is included in the package, but it would be useful to have a Silicon band. Standard head bands deteriorate over time and become loose quite quickly, so it is recommended to replace them with Silicon bands as soon as possible.
Opinions and requests to Manufacturer.
I have no personal complaints about the performance.
If the price were a little lower, I would purchase Repeat when my current Headlight fails...
View detail
A must-have for maintenance
YAMAHA I purchased Y’S GEARService manual for maintenance and restore of FZX750.
I think YAMAHA's service manuals are conscientiously priced, since the ones from Japan and other manufacturers, especially H cars, are very expensive.
(Supplemental editions are purchased separately as there are slight differences depending on the year)
I thought the Manual was no longer available since it is an old vehicle, but thankfully it is still published.
This Manual is easy to understand because it uses photographs rather than graphics due to the content at the time of its release!
However, since the unit of torque for tightening Bolt and Nut is expressed in ?-m, it is necessary to replace the unit with N-m.
If you do your own maintenance, a service manual for your car is a must.
*Used Situation is the usual way of riding. The work skill is set as intermediate because the degree of difficulty varies depending on the content of the maintenance.
View detail
All but Model 2AK0 are required to supplement the complete version.
I purchased this as a supplement to the complete edition because I need it for maintenance and restore of my YAMAHA FZX750.
(You can't use the supplemental version if you don't have the complete version.)
This supplement is a supplement to Model 3XF1-5.
My FZX750 was probably a learner's car? The model number is 3XF2, but the VIN number is not listed in the manufacturer's site.
The battery is also specified by the manufacturer as YB14L-A2, but YTX9-BS, a sealed type, is installed.
The electrical system is a weak point, so it is thought that the previous owner improved the entire regulator.
My FZX750 has had a strange fate. My FZX750 has had a strange fate, which is why a supplemental version was necessary.
The service manuals of the time were very detailed, listing the bearing numbers for each part, the Horn, StartingMotor, generator standards, and even the manufacturer.
View detail
YAMAHA FZX750, final 3XF5 supplement.
I purchased this as a supplement to the complete edition because I need it for maintenance and restore of my YAMAHA FZX750.
(You can't use the supplemental version if you don't have the complete version.)
This supplemental version is a supplement to Model 3XF5.
My FZX750 is model 3XF2, and I purchased it after determining that the contents of the final 3XF5 were not covered by the complete and supplemental 3XF1-5 editions.
I know it is a minute difference, but it is better to be prepared.
View detail
Matching is great!
Rear Carrier is also KIJIMA, so Matching is no problem.
It looks great. All that is left is to purchase the Side Back.
View detail
I'm still glad I bought it!
I think the best value is the ability to manage Torque. View detail
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
Convenient locking by pushing in
The simple shape, light weight, and compact design are also good.
I use it with another Manufacturer's Chain at home and as a Disc Lock with Single Body when I am on the road.
Rubber lids are sold as Repair Parts and may be purchased in advance.
View detail
Universal and easy to use
Material:Stainless Steel 8mmCap bolts are available at Home center in various lengths (about 150 yen per pc).
Even if it is not a car-specific product, this one from Universal was sufficient for me.
Also, there is no extra Logo, etc., which is nice and clean.
View detail
Eliminates string flapping
I bought this bag because when I bought and installed the MOTO FIZZ MP-295 Seat Bag, I had a lot of extra belt and it was inevitable that it would flop around while driving. I thought that the size of the Option product from the Manufacturer was more suitable for my needs.
As a result, I have no regrets and use it comfortably.
View detail
Good texture
I locked the Saddle Bag and tried to put the Wire through the Belt on the Back Support, but the loop of the Wire was too thick and did not go through. However, I have no complaints because a thin wire would make the security weaker. I just bought it, so I don't know how durable it is, so I give it 3 stars. View detail
Yoshimura Bling
I ecpected this to be just another keyring. It is but with Yoshimura quality even down to the packaging its A*. Now I've got rid of the dealer keyring and replaced with this elite keyring. Made from premium materials. Embossed on both sides as well. The actual ring is very rigid and needed quite some effort to mount it to the bike key View detail