Reviews
Large and good
I was looking for a suitable key holder for my motorcycle, and I found this one. View detail
Used as an accompaniment to Main key
Black also has it and uses it as a companion for his keys.
I think the quality and so on are fine because it is HondaOEM only.
View detail
a cute keyholder
Quality and Texture Information Monkey key holder made of rubber I am cute and satisfied with the feeling of use Design Information Monkey Design Size Chart Information ¥ 500 Size Cost performance and comparison with other products Only Honda key holders are purchased and cannot be compared to other products Delivery and packaging to WeBike in a week The packaging is great It is regrettable that the color of problems, precautions, or precautions does not vary My monkey is red, but only yellow exists View detail
Affordable Size
I use it as a MainKey Holder.
Satisfied with the Size as per Image
It is easy to use and the Carbon Style design is great.
Cosmetically, I think it is fair to say that it is considerable.
View detail
Good for the One point of the key.
It is well made down to the smallest detail. I like it as one point.
Since we have three CUBs, it is very useful to have a PVC Key Holder for each of them so that we can easily identify which CUB the key is for. Actually, each of the three CUBs has a different key size and design, so I can tell them apart even without the markers. (Lol)
View detail
Key Holder replacement
[How is it used?
The Honda Key Holder that was attached to the NS-1 Key broke, so I bought a new one.
I really wanted to use the same Key Holder, but it seemed to have already been discontinued.
Again, I looked for a Honda Attachment and decided on this Key Holder.
Was the one you received as per Image?
The size of the Key Holder is just right, simple and cool.
How was your experience with it?
I have installed several keys such as Motorcycle Key and Garage Key on the Key Holder and it is easy to use.
[Points to note]
I haven't gotten it wet with rain, etc. yet, but if it gets wet with water, the color will likely fade,
I try not to accidentally leave Key on when I wash my car.
How did it compare to other products?
Compared to other HondaAttachment products, the price was reasonable and it seemed easy to use.
I tried this way.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing special
View detail
Large than I expected
Since the area around the main switch is painted black, a normal key holder would peel off when another key hits it, so I bought this one that can wrap unnecessary keys.
However, this does not mean that the body is completely protected, as there are parts of the body with Rivet or Rings that belong to Gold.
The ultimate solution seems to be to insert only the Main key.
View detail
Fits: HONDA PCX150, HONDA FORZA(MF13E), HONDA SUPER CUBC125, HONDA X-ADV, HONDA PCX
As expected, OEM Product
Key less OEM Product to prevent scratches on the hob!
The stones are the perfect Size and texture, but...
If you use a little more texture or Brassetc. on the Gold part........
More Parenthesis would be nice.
View detail
Not much storage for the size of the Large.
I had the Black and purchased the Brown addition.
It is used as a spare Key set. In other words, I do not use the keys in this Key case, but I always carry them with me.
Since Motorcycle, bicycle and home keys no longer fit in Black, I separated Motorcycle for Motorcycle and for Motorcycle.
Both were chained and purchased separately. Loop Key Holder Attach to the Belt of the jeans with
We think that the spare key should be attached to Pants. The risk of losing the spare key with the jacket is high because it can be easily taken off.
With Pants, there are few Situations to take off on the go, and it is extremely unlikely that they will remain undressed.
It is dangerous to use this key case with the Ignition plugged in with this key case attached. Because the Key HolderBracket inside is poor.
To begin with, I do not use anything other than a light Key Holder on my Main key.
When I carry it with me, I keep my home, helmet holder, chain lock key, etc. with me, but when I ride, I remove them with One-touch.
View detail
Trendy Carbon Style
My father bought a Honda ADV150 as a ReturnRider. I bought this bike as a gift to commemorate his purchase. The trendy Carbon Style look is a good parenthesis! View detail
Easy to use
[How is it used?
Used as a key hanging for WaistBack.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I felt that the spring force was a little strong, but after using it, I don't mind it so much.
When I use it attached to WaistBack, it is useful Large change without taking the key in and out.
The appearance is resin and not luxurious, but this is not a problem as it can be used without hesitation.
How did it compare to other products?
For the price, it looks cheap.
View detail
For MONKEY125 key.
The reverse side has Honda logo embossed on it. The material is PVC, so it's good that it won't scratch around the key cylinder even if it's attached to the key of MONKEY125.:Too bad it is only available in Yellow color, because my MONKEY125 is Red color. View detail
Slightly Large to prevent malfunction
I am using Smart key for HONDA ADV150.
Originally, we were using OEM Product's LeatherSMARTKey Holder with window.
The pressure in the bag causes the Lock button to be pressed and held down.
I got marker- status in Helmet in.
Wallet and house key could not be taken out together and it was a Large disaster.
We wanted to avoid any malfunctions in the future, so we purchased this product without a window.
Compared to the last one.
The inside and outside diameter are both one size larger (originally designed for the CBR1000RR-R Smart key).
With Smart key for ADV and for PCX, there is plenty of room on the inside and it moves slightly inside.
The sense of luxury has increased considerably.
Malfunctions due to physical impact are likely to be completely preventable.
This is how it is done.
It is no longer a key, but takes up a good deal of volume.
Smart key is acceptable because I leave it in my bag.
I am satisfied because I feel that I no longer have to worry about malfunctioning markeroo.
View detail
Fits: HONDA PCX150, HONDA FORZA(MF13E), HONDA SUPER CUBC125, HONDA X-ADV, HONDA PCX
Not that there is anything wrong with this product.
The ADV150 Smart key was placed in this product, stored in the bag, and stored under the Seat.
The Lock button is pressed and held for a long time to disable it when the luggage is hit.
The name of the company is AoWhite.
Large disaster because the bag also contained Wallet and house keys.
It was still better because I was on my way home from a holiday, but it sent chills down my spine to think that I had been on a trip or at work.
(I checked after the fact and it was still a contact malfunction lock, not a dead battery.)
Frankly, Motorcycles, unlike cars, are easy to tell apart.
Originally, the effective range of the Smart key was also quite narrow.
Considering the Risk of malfunction, I would have been happier if Answerback and ON/OFFButton were not needed.
Therefore, I now use a Smart Key Case that covers the entire surface from this product.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50
Design is good
I use it as a Key Holder and I like the design.
I like using it because it is cute, and since it is Latex rubber, I don't have to worry about it scratching my car body.
View detail
Ring is too hard.
I bought it to see if I could combine my motorcycle key with the keys to my top case and wire lock.
I like the design because it doesn't feel cheaply made.
I'm a little sad that my NC key is suddenly covered with scratches. I've been using the ring of another key holder. Or maybe I should put a thin ring between the keys instead of attaching them directly. Still, it's hard.
Also, it's hard to operate the slide when the Glove is on. I think it would be better if it was a little more convex.
View detail
I like that it's rubber so it won't scratch.
I bought this to attach to my LITTLE CUB key of the same color.
Since it is small and made of rubber, it can be used on the body around the key.
I like that it doesn't scratch.
If you're a CUB rider, you'll want to use more than just the motorcycle key.
Yes.
I hope there will be more color lineups.
View detail
It's cooler than the one I got when I bought it.
I don't mean to be rude, but the Key Holder I got from a regular store was a cheap one with "00 Store" written on it.
I thought it was a bit lame and didn't raise Tension.
The color is more vibrant and cooler than I expected. I was actually going to get the White one.
Sold out, but Red is cool enough too. I think you should buy it because there seems to be no stock like that.
View detail
slightly expensive
Design is great for HONDA party.
As described in the material description, the body is made of Polyacetal resin and the logo of HONDA is made of Silicon.
If you use it too hard, there is a fear that this silicon will be torn off.
HONDA Logo is only one side.
View detail
Compact Key Holder.
The size is a little small but it is easy to carry and the design is stylish. The combination of METAL and LEATHER gives it a luxurious feel. View detail