Reviews
Handlebar Lock is not possible.
Ignition and Seat Cylinder set.
I was able to purchase it at a reasonable price, but I was unable to lock the handlebar, which is the most important thing.
We took security measures in a different way.
View detail
Easy to use
The rear wheels can be used without difficulty, but the front wheels cannot be used. The front wheels are gradually shifting, perhaps because they are stuck in place. View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Essentials for Overnight Touring
Lost my HalfCover that I used for 6 years last year on a touring trip, and purchased this product because the previous one, a necessity in case of open-air touring, was discontinued.
As I had expected, I will use it without the Pannier case, although the width of the Rear is not enough for Shinobu Sen with the Pannier case attached.
The half has a string fastener at the center and a quantity fastener closer to the rear.:Pair (for Left and Right) It has a D-ring in one place. I think you need to prepare a clasp.
The fabric is thin, lightweight, and easy to handle.
View detail
I bought it.
I bought it but haven't used it three times, only to go shopping for curry and dumplings. It is not a very large bag, so it can only hold about one or two days and nights. It is faster to bring Single Seat and replace it when you remove the Back. View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
PCX160 8BK-KF47 Mounting on
Purchased for daily use such as shopping for two and for overnight touring.
The installation is done with multiple one-touch belts, so anyone can do it.
However, if the Belt to be installed is Quantity:Pair (for Left and Right) somewhat on Seat's buttocks as it straddles the
Interference.
The capacity is large enough to hold a helmet and many other items.
The waterproof property is also excellent, so rain will not be a problem.
The flap (lid) is held in place with magic tape to make it waterproof,
This guy is super powerful. (Lol) The one-touch is not easy to open and close.
However, it is unavoidable in order to maintain the waterproof function.
View detail
Does a surprisingly good job.
This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-R1100, SUZUKI GSF1200, SUZUKI GSX-R1100, SUZUKI B-KING, SUZUKI GSX1400, YAMAHA YZF-R25, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XJR400RII, YAMAHA DIVERSION, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ400ZE, YAMAHA XJR400, YAMAHA XJ400Z, YAMAHA XJ400ZS, YAMAHA XJ400D
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
It is quite good.
Although it takes 60 seconds to establish the connection due to the Radio Law, this product uses a soft power supply that shuts down 5 seconds after the ACC power is disconnected, so even if your car model shuts down the ACC power at the time of cell start, as seen in BMW etc., the power will not be turned off when the engine starts. Therefore, if you put on the Helmet and Gloves after turning on the key first, you will be connected to your smartphone by the time you step over and turn on the Cell, and you will not feel the stress of waiting for the connection.
If your vehicle is equipped with a 12~16mm GPS Mount Bracket, the Tanax AIO-5 Mounting Bracket can be used without modification.
The cost performance is great, but the screen size of 4.5-inches is a little insufficient.
View detail
Large sturdy even on Motorcycle as it is firmly fixed.
I use it on my Insta360 X3. (I'm planning to buy Ace soon, so I'll use it there as well.)
With X3, the position is so delicate that it just hits the chin of the full face, so I think other ActionCamera would have no problem at all,
The Camera is easy to put on and take off, and since it has two clasps, the Camera will not be upside down as is often the case with products that hang from the neck.
The fact that it is an official Insta360 product is also a reassuring factor.
It can be used for walking around town or in the mountains, except for motorcycle, and since the price is only 3,000 yen, one can be used for various situations and is very cost effective.
View detail
It can be used with a turnstile.
I bought this to attach my old Porch and Smartphone Case to my Scooter.
As others have stated in their reviews, it rotates when installing the Porch and other parts.
I solved the problem by adding a Nut to stop the loosening.
Because of its high quality, the appearance of the product without Porch and other products is not bad.
View detail
For the use of Income.
I have been using a btx2 pro s with a SZ-RAM4 and bought it with Speaker so that I could use it with my new SHOEI Z-8. I was so attached to the SZ-RAM4 that I couldn't bear to retire it, and since I would likely want to use Jet in the hotter months, I decided to keep it too. I decided to keep it, and the question arose as to what to do with Income.
When using Income, the Microphone is available in Included Parts:for full face, and it is sufficient to use the unused one in Included Parts:for the mounting Clamp, but the Speaker and SlideMount need to be replaced or newly prepared each time they are used. However, the Speaker and SlideMount need to be replaced or newly prepared each time they are used.
I thought about changing the Speaker and SlideMount for each season, but I decided to purchase the Speaker and SlideMount because it is troublesome to take off the interior and put on and off each time, and if I just attach the Body, I can use different Helmets depending on my mood. I decided to purchase a Speaker and a SlideMount.
For installation, we decided to use double-sided tape to attach the outside of the clamp, which was not used in the Included Parts:section, to the helmet, but the SlideMount, which we purchased additionally, does not come with two screws to fasten it to the clamp, We had to think of a way to fix it to the Clamp. At first, I was thinking of using one screw for each SZ-RAM4 and Z-8, but I didn't want to damage the screws by applying excessive force, so I decided to prepare screws. However, this was not the Size sold around the corner. I had to buy a clamp to attach the screws, and it cost about 2,000 yen for two small screws. I had no choice but to use the regular screws for the Z-8, and for the SZ-RAM4, which is likely to be used less frequently, I removed the Clamp once, removed the Screw holder from the Clamp, and fixed the SlideMount to the Clamp with 2.5mm diameter Screws and Nut to make it ready to be used. The Clamp was removed and the Screw holder was removed from the Clamp.
As for the wiring, in the SZ-RAM4, the wires were placed inside the helmet, crossing the edge of the helmet, so it was necessary to protect the wiring from damage when the helmet was placed on the ground, etc. In the Z-8, the wiring could be pulled inside the helmet without passing through the point where it hits the ground, etc., so no protection was needed. However, with the Z-8, it was possible to pull the wiring inward without passing through the point where it hits the ground, so no protection was needed, and the wiring was well concealed, making it look very refreshing.
After installation, it works fine and I can now use Income on my Z-8. For this gold price, I would like to see at least a Screw included in the kit.
View detail
Difficult to understand the settings
It does not include a detailed instruction manual, which is a problem when it is not connected to a smartphone.
I set it up while emailing Manufacturer.
Since the Instruction Manual is the same as the Instruction Manual that comes with the DriveRecorder, it is difficult to understand whether it is not displayed due to a defect or whether it was not displayed in the first place.
View detail
attachment
Easy installation for beginners
Tank Bag range is broadened.
View detail
Fits: SUZUKI VANVAN200, SUZUKI GSX-S125, SUZUKI GSX-R1000R, HONDA APE 50, HONDA DIO110, HONDA BENLY50, HONDA BENLY50110 PRO, HONDA BENLY50110, HONDA BENLY50 PRO, HONDA APE 100, SUZUKI GSX-R1000, SUZUKI BURGMAN200, YAMAHA MT-25, YAMAHA MT-07, YAMAHA MT-03, YAMAHA MAJESTYS, YAMAHA CYGNUS 125, YAMAHA CYGNUS X, HONDA APE TypeD
What a quality!
It is subtle in terms of Size.
I think the normal use is to use Side Stand with Handlebar Lock.
Sexy as in the picture, your legs are visible. I wanted it to be just a little bit longer.
Also, the bottom belt broke off after 3 days of use. What kind of quality is this?
The motive for purchasing the product was not only the price, but also the fact that it was written as heat-resistant, so I focused on the fact that I could apply it immediately after returning home, but Belt may have melted due to the heat from the Exhaust System.
As for the Cover, it is Black and has the word Security on it, so it is concealed for the purpose of minimum security. So, Belt is very disappointing because it is Clear.
I honestly want to return it.
View detail
For Wiring processing
Purchased for Wiring processing. No problem. View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
Included Parts:Required
[How is it used? Required for Pannier case installation
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? I didn't think it would be this bad
[Included Parts:were they on? None
[Was there anything that disappointed you? comparatively high
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
SP connect Anti-vibrationModule
I use an iPhone 12 and bought the anti-vibration because my Camera broke. It's been installed for about a week so it's not accurate yet,
I don't know, but for now Camera is usable.
It says it reduces vibration by 60%, but I don't know how much this is.
View detail
Effects not known.
I installed it to prevent my phone from malfunctioning.
The installation itself is easy, but so far the effect is unknown.
It would be nice to have three different hardnesses.
View detail
We recommend Spray for rust prevention before installation!
Carrier is rusting all over the place. Rust. I bought it to refresh it. To be honest, it is an excellent part with high durability, but it rusts a lot, so I think it would be better to take the time to apply a seal coat, etc., and spray it with rust prevention spray before installing it! View detail