Reviews
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
This is a product that will not last long.
I've been using it for about a year and a half, and the material in it turns into a fine powder that falls on the car body.
It's also possible that it's because of the way the Cover was stored outdoors, but I felt that there was a problem with the durability that it would become so in one year.
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja 400 (2014-), KAWASAKI Ninja 250, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3, KAWASAKI Z900RS, YAMAHA MT-09, YAMAHA YZF-R3
Mmm.
I put it on my current NINJA400, but the angle is not level because it is installed in the mirror hall of Handlebar, and the inside is facing up, so when I install a smartphone or Beeline Moto, the screen is facing outward and I can't see it unless I look into it. The design and color are good, but from a functional standpoint, I'm not happy with it. View detail
Fits: KAWASAKI DevilHUNTER, HONDA APE50, HONDA JAZZ, HONDA SuperCUB110 , HONDA ZOOMER, HONDA DREAM , HONDA BROAD, HONDA MAGNA50, HONDA LEAD80, YAMAHA RZ50, YAMAHA TZM50, YAMAHA YB-1, YAMAHA YB50, YAMAHA GRANDAXIS , YAMAHA CYGNUS125, YAMAHA MATE70, SUZUKI ADDRESS100 , SUZUKI ADDRESSV125 , SUZUKI VECSTAR125, SUZUKI STREETMAGIC
SUPER CUB 50
I bought it because it was cheap
When it rains a lot, it seeps inside, but I think it's better than not applying it.
I think it is better to use it with WaterproofSpray on.
View detail
Fits: SUZUKI GSX-R1000R, APRILIA RSV1000mille, APRILIA RSV1000mille, SUZUKI GSX-250R, SUZUKI GSX-R1000, YAMAHA YZF-R15, TRIUMPH Thruxton R, YAMAHA YZF R-1, YAMAHA YZF R-6, SUZUKI GSX-R750, TRIUMPH Daytona 675, SUZUKI GSX-R600, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-400S KATANA, MV AGUSTA F4 1000, SUZUKI GSX-125R, KTM RC390, MV AGUSTA Brutale 800, KAWASAKI NINJA400
High-end Motorcycle Cover
outline
Motorcycle Cover with high protection performance.
Reason for purchase
I was looking for a Motorcycle Cover that would not scratch my Motorcycle and I found this product.
Appearance etc.
Included in the box is a Motorcycle Cover, a bag to hold the Motorcycle Cover, and a fixed Belt.
The inside was not a crumbly fabric, but a soft fabric was used for the parts that touch the Motorcycle, and it felt like a double layer with the outside fabric.
how to use
The basic method of hanging the cover would be the same as a regular Motorcycle Cover. Hang the cover from the rear side, and then hang the front side. After that, there is a front and rear drawstring, so pull the string and draw it down.
Impression used
I have been using it for about six months without any scratches on the Motorcycle, so I have the impression that the soft inner fabric is working well.
Compared to cheap Motorcycle Covers, the thickness and Material of the fabric is obviously different, so you can tell that they are made of good stuff.
I wonder if the fabric of the exhaust system part is heat resistant to some extent, since it does not melt due to the heat of the exhaust system even if it is applied immediately after use.
Since the size is just right, the front part of the Motorcycle Cover seems to be slightly caught on the Mirror when removing/attaching it, so it may require some hang to hang it.
When it rains, water leaks through the joints and the inside gets very wet and stuffy. It is better to put tape on the joints, etc. by yourself.
Durability is unknown, but the underside of the fabric looks a bit weathered, but not to the extent that it affects functionality.
Improvements
It is scratch-resistant, but leaks badly from the joints, so I don't think it is a good enough product to be called a masterpiece.
View detail
Not very good.
I used it for about a year and took it off.
First of all, it doesn't move well, and it's frustrating that it doesn't unlock (common individual difference in Chinese Smartphone Holder?).
My acquaintance's was running on Quantity.:Pair (for Left and Right) The inside of the fixed jaw was cracked (maybe the vibration was too severe because of the 250cc high speed driving)
It's cheap, but if it's made in China, it's about the same or cheaper price with charging function.
Most importantly, the possibility of an expensive phone falling out is terrifying.
The feeling of use was also bad, but I used it more patiently than I bought it, but I removed it at the opportunity of the damage of the acquaintance.
The value of the phone is unrelated to the Engine Displacement Volume of the motorcycle, so I think it should be considered.
However, if you put the included (also available at Repair Parts) silicon band on it, you will probably be spared from sudden drops, which is a must for this Smartphone Holder.
It's a popular product, but I personally didn't like it.
View detail
To Earth Rock.
I bought this for my earth lock.
The length, thickness, and construction are perfect, but
After using it for a while, the Cover became tattered.
I would have been more satisfied if the durability of the Cover was better.
View detail
Incompatible with Fender Eliminator Kit
I bought this because I want to install a Saddle Bag.
If you install it, you can't use Helmet holder, but it's not used much. (Difficult to use) So there was no problem there.
However, it is not compatible with the Fender Eliminator Kit that I originally installed. It's not a problem at Level, but it's bothering me.
View detail
If you want to mount it on the Handlebar, it might be possible.
When replacing the DDR-S100 with the Mivue M770D, the DDR-S100 has a MountQuantity option.:I was using Set and wanted to do a similar installation here so I bought it.
Mount of DDR-S100 is Material:I liked the texture in Aluminum, but this is Material:I'm a little disappointed with the look of the plastic. It will probably get whiter with use.
The Nut which is the pair with a special Bolt is probably 6mm though I did not measure it, and I pinched Nut with Long nose pliers and tightened it because there was no Spanner etc. which can correspond in the Tools Set at the time of installation.
I mean, Spanner might be able to fix it, but even if there is a Socket, I think the root of Mirror is in the way and I can't fit the tool to Nut.
Because Clamp itself wraps the Cap of Camera's Rear, it is troublesome that the Cap cannot be removed unless Clamp is loosened every time and the angle is also gap every time Clamp is loosened.
Well, I think that the construction of this clamp and the special bolt together deter theft.
View detail
Looks good after installation.
I bought this together with my MiVue M777D drrorecorder.
Because Rear is set to Fender Eliminator and License Plate Holder is installed, the quantity of License Plate:Pair (for Left and Right) The reason why I bought this product was that it seemed to be incompatible with the Bracket which is tightened together with the Bolt, and I thought that the appearance after Camera installation would be refreshing.
The wrench for the special Bolt is included, but I didn't have a Spanner or Socket in my tool box that fit the Nut on the receiving end, so I used Long nose pliers to pinch the Nut and tighten the Bolt.
I haven't measured it, but I think Nut is probably 6mm.
I thought it is not good to tighten Bolt nut too much because Clamp part is made of resin.
However, Clamp has a softness to fit Camera, so if this is destroyed, I think that the special Bolt is meaningless.
I took a spin around the neighborhood after installation, and the vibration from driving didn't change the mounting angle.
I'll take another look at it next time I go Touring.
View detail
Required for exchange
I bought this to install Ag ShowParts on a different vehicle. View detail
Too big and inconvenient
I've been using it for two years, and even if I want to move it a little, I have to take the Dial key out from under the Seat and turn it...
It's just a little thing that takes a lot of time and effort.
Cause it's too big and I don't want to put Dial key in Pocket.
I think it is possible to make it smaller, but it is being made in a haphazard way, and if it were in Japan, it would be improved, but since it is made in Japan, it will not progress.
If you use it with a short arm, the lock dial itself will be too large and the direction will be restricted.
Security is high and Ideas is good, though it is a simple structure that doesn't break, but it is a waste!
I've stopped using it now, maybe I'll use it when I go on an overnighter, but until then it's in storage!
View detail
Wiring is too small.
The wiring to be installed in the box made by Manufacturer was broken during the second opening and closing.
The wire was torn out from where it was fastened with Nut.
I reconnected it myself.
Also, the contact with the Body is poor, so it flashes with vibration
I can't use this.
The build quality is lousy for the price.
I'd like to improve on that.
I have no choice but to connect it directly and use it somehow.
I'm not sure if I would recommend it to others.
View detail
Fits: KAWASAKI Ninja1000, YAMAHA YZF-R25, HONDA XR250, KAWASAKI NINJA2 Helmet50 , HARLEY-DAVIDSON XL1200S, KAWASAKI Z1000, KTM 390 DUKE, KAWASAKI ZX-6R, KAWASAKI ZX-10R, SUZUKI GSX-R1000R, YAMAHA MT-01, YAMAHA R25, Others
It's huge on the z1000!
I'm using the Shell Seat Bag SS.
I bought this one to increase the capacity.
It's too large for the Z1000's pointy Seat and it hammers it out.
The capacity is enough for my needs, but it's not cool to look at.
It doesn't come into play very often.
View detail
Fits: YAMAHA Grand Majesty, YAMAHA majesty, YAMAHA T-MAX, SYM RY250, SYM RY250EFi, SYM RY180EFi, SYM RY200i, SUZUKI Sky Wave 400, SYM RY125i, KYMCO XCITING250, SUZUKI Sky Wave 250, KYMCO GD250Z, KYMCO GD250Z-125Z, KYMCO DINK 200, KYMCO GD125Z, HONDA forza, KYMCO DINK125, SYM RY250i, HONDA silver wing, HONDA foresight
It's okay (A little worse than...)
I bought this one because the one I had been using tore during a storm.
The fabric is PeLePera, and I'm worried about tearing it up as soon as possible;
The keyhole is only on the front wheel side.
I have a GIVI top case, but the rear wheel side looks a little tire. 。
Because the fastening of the middle part is String, it is difficult to tie up even if it is a gentle breeze.
I should have gone with the Buckle type.
Well, considering the price, I'm not sure if it's worth it, but
Now I think that I should have chosen something that I can use with confidence even if it costs a little more gold.
View detail
HondaService manual
Although it arrived two months earlier than the expected arrival date:・・・・・
It was Copy Version, and it was very difficult to see with WhiteBlackCopy to Wiring diagram.
I want you to make a color copy of the wiring diagram. To the old person whose eyes are weak, this part is not usable. (The price is the same as the regular goods, and it is like "Damn it".
View detail
Motocrosser's Engine overhaul
Used in Engine overhaul of KX450.
The shaft diameter is different, so a little wobble is unavoidable.
When I tightened the bolt to fix the shaft, the nut welded to the shaft was removed.
I wish you had booked it instead of tending it.
View detail
Unable to purchase with Bar code search
I tried to buy it using the Bar code search, but the search results showed The sale is now closed. I thought the Bar code had been changed, but when the product arrived, the Bar code was the same and the search results were still The sale is over. It was.
The product will be evaluated after use.
View detail
I don't have the original anymore, but...
I bought this product to bend, but I didn't know it was a steel product and couldn't bend it, so I ended up cutting and welding it.
I think it's a good thickness for Welding, but it's not good to buy for Small processing.
Absolutely no bending by hand.
The video shows the driving scene when passing the ETC Lane.
View detail
When you first buy it, you need rust protection!
Overall, it's a rough product, or rather, it's delicate when you think of it as a product of a large hand manufacturer.
The finish was dirty due to poor welding, and I was wondering if it would rust.
I used rust remover while it was still minor, applied rust inhibitor and no problems since.
I wonder if the cost is not too good.
Exclusive Bracket with dirty weld marks and easy to rust, Material is Steel.
However, it is only a special product of the Large hand manufacturer, and the accuracy itself is not bad.
The dedicated bag is also easy to install and can be fixed firmly, so the performance itself can be evaluated.
It's just that it's poorly made and the price is not commensurate with the product.
View detail
Things of the time.
It's a reprint, so it's natural that it's from that time, including the article content, so it's not too difficult to see. But I felt the price was high. If it is a reprint without an article update, I thought it would be good to be a little cheaper. View detail