Reviews
Fits: HONDA CR250R, HONDA CR125R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TE125-501, HUSQVARNA TX125
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
A little heavy but sturdy and Compact
The body of the car doesn't have much of a slope when using the STAND, so you need to think about where to stop it or it will fall over
I don't blame you, though, because the angle will put a strain on the Swing Arm LINK
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
Strong strength
I used Triangle type STAND so far but I changed this type to T type.
Usually it will be broken if you try KICK with STAND attached
There was strength and durability enough to withstand KICK with STAND on,
Also, unlike Triangle it is Compact so people who are free running are better recommended.
View detail
Fits: YAMAHA YZ125 14.5mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ450 F 99-08 14.5mm, HONDA CR250 R 00-07 18mm, HONDA CRF450 R 02-16 18mm, KAWASAKI KDX200 11mm, KAWASAKI KDX250 11mm, KAWASAKI KLX250 R 11mm, KAWASAKI KLX300 R ALL MODEL 11mm, KAWASAKI KX125 03-08 18mm, KAWASAKI KX125 90-02 11mm
Very easy to use Compact retrofit STAND
The Side Stand installation Bolt of KDX 200 SR became stupid and it got to fall off during running.
When I looked for something in place, I found this product, purchased.
【What made you decide the purchase?】
It was inexpensive in the carrying STAND, it seemed to be more convenient to carry with Compact than Triangle stand.
【How was it actually used?】
It is easy to install just inserting into Rear axle.
You can use it even on gravel or slightly soft soil.
【Was it difficult to install? (Hard parts case)】
Just plug it into Rear axle, but it seems likely to beat Motorcycle when it crouchs trying to plug in unfamiliar.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Be careful as it may collapse when used on a sloping ground.
During Touring I am hanging between Handlebar and Hand guard.
It is caught that the shape of the letter T is good, it will not fall unexpectedly.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
I hope we are a bit cheaper.
【Have you compared items?】
DRC : Triangle stand
I found this first, but I bought it off because it is a difficult shape to carry for Touring.
[Others]
When I could not turn on the OEM SIDES tunt I was seriously impressed with welding and replacing it, replacing it with Swingarm, but it was okay to solve it somehow.
Trouble that does not anticipate old motorcycle occurs frequently, but it is also fun.
* Can you recommend this product to friends and acquaintances? ⇒ YES! Recommendation is possible.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
Depending on Enduro's Regulation
Recently, Enduro race which is easy to install Side Stand has increased, but there is also Race which is necessary to detach Side Stand and it is safe if you have this STAND at such time. Because it corresponds to Motocrosser and TRAIL car of each Manufacturer, it can also lend and borrow with a friend. It was conveniently used but it is purchased again because it fits the theft.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
It purchased to KX85. Although it is purchase for triangular STAND loss of KX85, the device which can be used for MX Motorcycle of almost all domestic Manufacturer & displacement volume is given, and it is used even if it GET(s) a new Machine.
It purchased to KX85.
Although it is purchase for triangular STAND loss of
KX85, the device which can be used for MX Motorcycle of almost all domestic Manufacturer & displacement volume is given, and it is used even if it GET(s) a new Machine.
Since it is a simple free STAND, it is called especially this and other predominancy is not felt, but the Logo of nonchalant DRC is pleasing.
Although I hoped that it has, and you rebought a pure triangular STAND, or hardly bought it, when needed at any rate (losing like me), is it a thing with this product more sufficient [ pure lay ]?
In purchasing this time [
], since priority was given to the spread with brand-name parts over No. 1, it worried, without this DRC Triangle stand MX being somewhat higher, and resulting in purchase easily, but it entered during the Sale and opted for purchase by some discount.
Even if it is not expensive goods, a price is worried too.
It was *5 when nominal cost was cheap to a slight degree.
(Since it is purchase during a Sale period at an I individual target, it is *5.)
View detail
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, SUZUKI RM-Z450, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450F, HONDA CR125, HONDA CR250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125 14-18 (11mm), HUSQVARNA FE125-501 14-18 (11mm)
It was used in KX85. It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended. It is convenient if you are truly. It carried out in the rate, it rusted immediately, and became tattering
It was used in KX85.
It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended.
It is convenient if you are truly.
It carried out in the rate, it rusted immediately, and became tattering, and when the axle slider was attached, it was not able to use.
Furthermore, it damaged immediately, and the plug portion bent and was by carrying out.
It seems to be better to consider consumable goods.
View detail
Fits: KAWASAKI KLX300R, KTM 125EXC, KTM 125EXC, KTM 200EXC, KTM 250EXC, KTM 250EXC-F, KTM 300EXC, KTM 350EXC-F, KTM 360EXC, KTM 380EXC, KTM 400EXC, KTM 450EXC-F, KTM 500EXC, KTM 500EXC-F, KTM 520EXC, KTM 530EXC, KTM 530EXC, SUZUKI DR250R, SUZUKI RM85, YAMAHA DT200WR
It is used for WR250R. Because a car body is heavy, it bends simply. Since the crack is not contained, it can still use, but if weight is applied, it will not arrange. Let's check the state of a ground surface.
It is used for WR250R.
Because a car body is heavy, it bends simply.
Since the crack is not contained, it can still use, but if weight is applied, it will not arrange.
Let's check the state of a ground surface.
View detail