Reviews
Stable quality
The quality is stable and the cosmetics are good.
I have used it for almost 10 years and it has served me well.
It protected Motorcycle, which was parked under the eaves, for many years.
View detail
![Service Manual [Complete Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
It will be useful for something.
I can't do detailed maintenance, but I bought it to know the structure. It is useful for something. View detail
Purchased to better understand my car.
As expected, I cannot do the work up to engine overhaul, but it is useful for daily inspections.
It's a great read.
I was a little surprised that the current Service manual didn't explain it with pictures, but I guess Illustration is easier to read.
View detail
Fits: YAMAHA BirdCity125, YAMAHA BirdCity155, YAMAHA BirdCity125 A/C
It is easy to cover because it is a dedicated product.
Used on BirdCity125 with Rear box.
I was parked in the open air in Space facing the driveway where my house is located, and one day when I went to get in, I saw a flyer at Handlebar that said I would buy it, and I also bought it for security purposes.
I was looking for a cheaper Universal Product, but since I have a Rear Box and the BirdCity has a wide front width, I was not sure if the Universal Product would fit when I put it on, so I ended up settling for this product, which is a dedicated product. I was looking for a Rear box.
I had already used Y's Gear's E Type on another motorcycle, so I knew about the fabric to some extent, but the front side is made of fabric with color, and there are slits on the front and back that can be used to pass locks, etc. It is still a very easy-to-use cover.
Since it is for full equipment, I am assuming that a High Screen will be installed, but my BirdCity has a screen that is not that long, even though it is an Other Brand Product, so when I put it on, the screen portion is too much.
It might be OK to fasten it with a clothespin, but it would have been better if the Cover had a Velcro tape or something to fasten it shortly.
I also personally like to use a long wire lock to reduce flapping of the Cover to reduce the quantity.:Pair (for Left and Right) I was a little disappointed that the Slit through the lock on the Front side is only for the Left front wheel, although I wanted to pass the front wheel of the
Also, dust and sand may come in depending on the wind direction due to the ventilation on the side.
But still, it is better than the previous open-air parking, and it is no longer dirty every time I look at it.
As for durability, I am not sure yet, but it is easy to put on, so I think this is the one I will buy next time.
View detail
Side case tracer 9gt
It's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket t's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket It's price for one pair and complete bracket View detail
It is safe if you have it.
I feel like I would buy Motorcycle if I bought it.
Every time I bought a motorcycle, I got the Service Manual and PartsManual.
This is especially necessary for those who have older motorcycles and do their own maintenance!
A service manual would be perfect.
It is very easy to read, and the exploded view allows me to accurately trace the OEM parts number, which is very useful for ordering parts.
I feel like I bought it before Motorcycle, but … it's ok. I have already decided which Motorcycle to buy.
Oh, it has nothing to do with people who throw everything to Motorcycle shops.
More and more people don't even change the oil themselves anymore.
View detail
Purchased without hesitation!
Purchased to add a top box.
Since we plan to install another company's top box, we could have originally purchased another company's inexpensive rear carrier, but we chose this one because of its heavy construction and design. However, considering that the Plate (sold separately) must also be purchased, the price is higher, and the cost performance is not as good as I would have liked.
View detail
For ETCBody protection
I had it installed at the shop at the same time as the ETCSetup and Body installation prior to delivery.
I thought the OEMOption would be sufficient for the quality of the product.
I am satisfied that it fits under Seat and Beauty.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, Others , YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA SCR950, YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA XMAX, YAMAHA YZF-R15, YAMAHA YZF-R125
Y'S GEAR ETC Pouch3
The double-sided tape is used to attach the Magic tape, which has a very good adhesive. Unfortunately, the hole for the WiringCable is too large, so it is best to install the WiringCable together with the ETC when installing the ETC. View detail
It's a must if you want to maintain it.
I purchased this product to replace Handlebar.
Since I am still planning to replace the exhaust pipe and do some brake maintenance, I thought it was essential if I want to play around with it, as it provides necessary information such as tightening torque and assembly order.
View detail
Fits: YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT C-Spec, YAMAHA SCR950, YAMAHA DS4, YAMAHA DS11, YAMAHA DSC11, YAMAHA XVS1300A, YAMAHA XVS1300CU, YAMAHA XVS1300CA Stryker, YAMAHA XVS950A
The skimmer is Large size even though I bought the correct size.
Used with Yamaha's BOLT Shoulder Bag.
I bought it after confirming that the Size fits, but the skimmer seems to be Large.
In fact, after the wind blows hard, there will be a lot of Dust on the car body.
I think it is because the lower side of the Body Cover is Large and open.
The quality of the cover itself is as expected of a manufacturer's product, and even after 5 years since purchase, it seems to still be usable without any signs of tearing.
I think it is quite easy to use without feeling it dissolve even if it is applied immediately after driving.
But I think I will buy another Manufacturer next time.
View detail
To those who maintain it.
Purchased for maintenance. Necessary for doing my own maintenance. View detail
Introductory machine for crime prevention awareness
[How is it used?
CBR-250RR (MC51):
Ground:On Concrete
Situation:Outdoors (covered)
Motorcycle Cover:YAMAHACowl mirror (https://www.webike.net/sd/24026744/)
Duration:continuous use from late 2018 to as of January 16, 2024
・GSX-R125：
Ground:Rubber
Situation:Outdoors
Motorcycle Cover:YAMAHACowl mirror (https://www.webike.net/sd/24026744/)
Duration:Continuous use from approximately 2020 to January 16, 2024.
Was the one you received as per Image?
As shown in the image, as shown in the Image.
How was your experience with it?
Relatively inexpensive among Chain locks, but the motorcycle manufacturer's OEM product is reliable.
Blue color makes it stand out, so there is a sense of security.
The keyhole is equipped with a Shutter, albeit a manual one, for peace of mind.:Plastic, but no cracks or dislodging yet.
The key is not removed when unlocking, so there is no forgetting to remove it, but if you throw it roughly on the ground, the key may break off.
The key itself is large, about 65mm from the tip to the end of the backpack. It may be difficult to lose, or it may be in the way.
(Reference:Motorcycle key of YZF-R6 approx. 75mm, KryptoniteChain lock key approx. 50mm)
It can be threaded through the same Y's Gear Motorcycle Cover hole without any problem.
The Blue Sleeve will gradually tear. Even if it is avoided, the Chain is covered with Vinyl-like material, so the Chain is not exposed, and there seems to be little concern about damage to the Wheel.
Blue Sleeve gradually weathers and turns to powder. I am also worried about being scattered by the wind.
The CBR side has completely lost its Blue part due to tearing and powdering.
[Points to note]
The Blue Sleeve is not very durable and mainly causes stains on clothing, shoes and Motorcycle Cover. The vehicle body was easily cleaned by wiping with water.
How did it compare to other products?
・KRYPTONITEChain lock：
The shape of the key is more complex and more secure than this product
Sleeve durability is 2 to 3 years longer than CBR in terms of duration, but still no rips and this product fails miserably!
Appeal is probably better than KRYPTONITE.
・Apple AirTag：
The product can be purchased for less than 5,000 yen and has the same common features to prevent crime, but AirTag is effective after it is stolen, whereas this product is effective in preventing it from being stolen
Although the durability of the sleeve has the disadvantage of causing motorcycle stains, it is a manufacturer's OEM product with an affordable price and can be used for security appeals.
View detail
It has been helpful for maintenance.
This is very useful for maintenance, as it allows us to see how to disassemble and assemble the equipment in advance. View detail
Fits: YAMAHA RD250/RD400 (1A4/1A5) 76, YAMAHA RD250/RD400 (1A4/1A5) 76
RD250 Manual
As in the previous Service manual,
I have been looking for this for a long time. Thank you very much. Thank you again.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10 SP
If it's a YAMAHA Motorcycle, you can't go wrong with this one.
I purchased this for Chain Maintenance of yzf-r3. I used to use Side Stand for simple maintenance, but it was slanted and difficult to use, so I bought this one.
The price is a little high, but it is made by Y's Gear, so it is well made and gives a sense of security.
Even a beginner could lift up with no difficulty and did not feel shaky at all during the work.
If it is a YAMAHA Motorcycle, this is definitely the way to go.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-01, YAMAHA FZ8, YAMAHA FZ-1, YAMAHA FZ-1N, YAMAHA XJ6N, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA TDM850, YAMAHA TDM900, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA DS250, YAMAHA SR400
Motorcycle Cover with good balance of price and quality
We recently added a Large size NAKED to our fleet, so we purchased the 2L Size.
I do not own any Yamaha Motorcycle, but all Motorcycle Covers are E Type by Y's Gear.
I am considering it for dust protection Main since it is stored under the eaves.
The new product seems to have been renamed E+ (ePlus), but I am not sure how it differs from the previous product.
I was relieved to see that the ease of use has not changed, with color-coding on the front and back to avoid hanging mistakes, and a draw cord to tuck in the hem to keep the wind from blowing in.
View detail
It was a detail.
The price seemed high, but I was convinced because of the number of pages and the detail of what I received. View detail
RD250Service manual
I have been looking for a Service manual for a 1976, RD250 for a long time and I am glad I finally got it. Thank you again. View detail
I prefer the design to SW-MOTECH's Carrier!
I bought the for Left Side instead of for Right Side because there was a possibility of replacing the Exhaust System.
I am operating this with SW-MOTECH Legend Gear Side bag LC1.
I'm glad I bought this one because it looks great with nothing on it.
Installation is easy, but Torque control and Screw lock application are required.
The price is acceptable because the construction feels very sturdy.
View detail