Reviews
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
Try it
It is quite heavy and firmly. It is long, so it is good to wrap it around something. However, since it is a key, it is a bit cumbersome, and for those who are lazy, I recommend the encrypted Chain. View detail
Sideways orientation for smartphone mount○.
This is a replacement for DAYTONA's Smartphone Holder.
Body and Bracket are Material:I chose it because it is aluminum, seems sturdy, and looks small and unobtrusive.
If the phone is clamped in the normal portrait orientation, there is no support on the bottom side, and I don't want it to fall if it gets loose, so I turned it sideways and clamped it. I am self-satisfied that it is more convenient because the Navigation map looks wider this way (laugh).
The body and bracket are ball joints, so it is convenient to change the orientation freely, but I am concerned about the durability of the nut for fixing the body because it is made of brass. And it is made inexpensively in China.
View detail
The name sounds sturdy.
I bought it because of the name Stubborn-kun and its affordable price.
Chain size is 5.5mm, so the sense of security is a little low, but the Key part seems to be sturdy as the name suggests.
The Chain makes it easy to wiggle and install, and it is easy to store when removed.
View detail
Design like a poisonous snake. w
Design like a poisonous snake, emitting warning colors.
Design that appeals to human instinct is also quite w
View detail
Convenient
It is very convenient to mount securely on Handlebar.
It can be fixed stably and will not shift while driving.
The angle can be adjusted freely, and the large, hand-cranked Screw makes it easy to install and remove.
View detail
It's surprisingly useful.
I'm on a Sidecar made in Russia, Ural GEARUp 2015 MODEL.
I bought this to mount my phone instead of Navigation.
Quantity the phone:I have to tighten the Dial on the Right Side to set it.
If you tighten it strongly, it will interfere with the volume Switch on your phone.
So I tighten it loosely enough that it doesn't fall off.
I bought it and used it for more than 1 year and toured Hokkaido, Shikoku and Kyushu.
No one had any Trouble with breakage or dropping the phone etc.
It looks cheap, but it is very useful for us.
View detail
Not too thin, not too useless!
I was concerned that it would be too thin for the Wire lock (personally)... but it was thick enough and flexible enough that it would be easy to use.
Since it is long enough, it can be used to lock the Pole of a sign and the front wheel of a Motorcycle.
View detail
It's heavy... so it's good, right?
It's my first time owning one of these, and my first impression is that it's so heavy.
The feeling of use is GOOD because it is a simple key.
It's only for home use, and I would have left it there anyway, so I wanted a longer one.
It's a place where you can't earth lock, so Motorcycle Cover and Quantity:I'd like to use it in Set to have peace of mind, I think.
View detail
This is going to be tough to break. (Guess what?)
[Intent to purchase]
I bought a new car so it wouldn't be stolen.
Product Description.
Three keys are included.
The keyhole has a drip-proof cover.
【Impressions】
A good place to buy a 2020 ADDRESS 110, but not a very safe place. But it's not there, so I bought it so it wouldn't be stolen.
The moment I received it and held the box, I was shocked at how heavy it was.
However, it is not suitable to be carried in the Top case due to its weight.
Three keys are included, so you don't have to worry about losing things, even if you often lose things.
One in the Key Holder, one in the Wallet, and one in the house for storage in a complete stance.
As for the installation, it's a bit of a hassle to install the U-shaped Gold, which is attached to the Chain at both ends. The lock is then pushed into the lock part and locked.
Depending on where it's installed, you may need three arms to turn the key while holding it down with your hand. Often times.
It's been a while since I started using it, but I don't know if the inside of it is getting rusty or not, even though it has a splashproof cover. The key has become very hard to turn around and I'm not sure when the key will break.
If it gets rusty and won't come off …
This is going to be tough to break. (Shudder.)
View detail
I think it's a passing grade
I install the rubber sheet on the Brace bar and use it Wrap it around and pinch it in the Sleeve and close the Clamp to secure it to the Brace bar The Clamp should be movable between the Sleeve and Clamp rather than completely fixed It seems to be designed to increase the range of motion of the phone in
The construction of the Parts that hold your phone in place is more solid and sizzlingly heavy than I expected It looks reliable
I tested it by cruising 100 km on the highway, but the problem of the screen is hard to see because of the shake There was not
I am not sure how long the product will last due to the plastic clamps
View detail
I'm sure you'll agree with me when I put it in there
There are a lot of these products out there, but are they really not falling off? I couldn't get it out of my head
So, I'm using "Galaphone We found our product when we looked for a folder that is compatible with
The price wasn't too high, so I bought it to try it out
I received the product today and I pinned it down as soon as I could, lol
The result is a GripArm attached to the GripArm that clamps a mobile phone (phone) We found out that it can be fixed firmly with the Cushion material
Also, when you remove it, you can press the Release button and you can remove it without any difficulty (I only hope that this function does not become an enemy...)
It is easy to join to the Exclusive Bracket (sold separately)
However, from the clamp part to the holder part may be too long If screw is not tightened firmly, the screen seems to turn to a terrible direction by deceleration Getc
View detail
I wonder if it's good for the price
LEAD Industries' "Glass Maholder I bought this for the installation of the
If it was about $2,000 for the Holder and Bracket, it was a trial run
When I actually installed it on the Motorcycle's Handlebar, it looked like it would hold it in place It is However "Chica La will be required, though (laughs)
I'm looking forward to attaching the Mobile phone to the Holder and running it for real
View detail
Large texture
I was wondering if the size of the bike was too big for a small type motorcycle, but I thought it was a good idea to cover it with I tried and it was covered tightly!
I think it's easier to put on a slightly larger size than the right size
I don't know much about durability and use as I just started using it
View detail
It is enough cospar as one of the multiple wearing locks.
Two more than one crime prevention I believe that there are three more locks than two so it's effective enough for Sub sub-category is sufficient Cost performance security lock.
It is a relatively conspicuous Green color, but it is probably because the feeling is attached by a person noticeable about fluorescent Pink as it is Large Off on crime prevention. Although it is making as it is, you can not complain about this price.
View detail
I need it enough
Durability and reliability can not be evaluated unless it is destroyed, but if it takes time to destroy, I think that it is meaningful to purchase
I think Cospa is expensive, just a chain and Padlock though
View detail
It is inexpensive among Chain lock with Length and thickness
As I tried to lock the earth at the place where I moved, I did not have enough Length because I already owned Chain lock, so I locked the two chain locks and locked the earth. In the Chain lock with Length and thickness I searched for cheap ones and became this item.
Although it is expensive compared to Wire lock, it seems to choose Chain lock which has a thickness to some extent even if it is slightly expensive, after watching a movie whose extremely thick Wire lock is easily cut off with a small tool.
Well, the product of this kind can prove that it was ineffective in case of theft, but if it does not fit the theft it can not prove its effect because its causal relation is not clear.
In other words, Bike Cover was put on the V-strom 650 at the outdoor parking lot in the 23 wards of Tokyo for 2 years, and the artificial lock of Red Baron on the front wheel (BL10) , It was not stolen where the earth locked the gutter of the building with the product and the Hirochi HL - 220 Chain lock on the rear wheel.
In addition, it is good to have a Shutter in the keyhole, but Shutter's fixation is weak, and even if you close the Shutter, it is a difficulty that the Shutter is often opened when you next open the key.
View detail
I think it's good..
ADDRESS110 (インジェクター) I am using it. I will not tell you that the fabric is also very good, but better feeling than Home centerLevel, or Level that I thought. Belt is also useful with One-touch.
Size purchased L, but enough to cover the normal Address. However, after purchase, I added 33 LBox of SHAD, but the rear side got hidden only up to the side of Exhaust System.
I also thought that it could be done with the Large grade L assuming the installation of the Box, but well, as for myself, this is no problem, but those who want to hide completely correspond to Box mounted cars Cover is better.
I do not know the durability yet.
View detail
I feel secure.
Since the storage place of Motorcycle is outdoors, purchase this product for theft prevention.
To be able to purchase at less than 4000 yen, the making is quite solid and there is a sense of security.
It is a nice place to have 4 keys in total.
As a point to worry about, there is a possibility that foreign matter such as sand can enter because the lid of the key can not be inserted,
Rust has already occurred in 2 weeks using it.
I am worried about durability, but is there any way it is this price?
View detail