Reviews
As the name implies, sturdy
The padlock part is very rigid and can't be broken down in a short time, and the chain part is wrapped with a fabric cover to reduce the risk of scratching the body or wheel. The red color makes it stand out. The length of the chain is 1.8m, which is not long enough to lock one car, but it is just right for locking other cars together. View detail
Chain lock with excellent cost performance
This is the best solution for those who are worried about inexpensive wire or chain locks, but do not need something too heavy that does not match their motorbike.
It is long enough to connect to other Motorcycle and easy to earth lock.
The weight is not too heavy and is easy to move, so it is not a hassle to take in and out.
The keyhole is expected to be durable, in part because of the Cover, which makes it difficult for Garbage to enter.
View detail
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
Try it
It is quite heavy and firmly. It is long, so it is good to wrap it around something. However, since it is a key, it is a bit cumbersome, and for those who are lazy, I recommend the encrypted Chain. View detail
Solid and sturdy!
The heavy key is secure, the Chain is tightly covered, and the Chain part is very flexible and can be freely passed through the Wheel and the pillar. View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/p05-img-KS219A_TS.jpg)
Sideways orientation for smartphone mount○.
This is a replacement for DAYTONA's Smartphone Holder.
Body and Bracket are Material:I chose it because it is aluminum, seems sturdy, and looks small and unobtrusive.
If the phone is clamped in the normal portrait orientation, there is no support on the bottom side, and I don't want it to fall if it gets loose, so I turned it sideways and clamped it. I am self-satisfied that it is more convenient because the Navigation map looks wider this way (laugh).
The body and bracket are ball joints, so it is convenient to change the orientation freely, but I am concerned about the durability of the nut for fixing the body because it is made of brass. And it is made inexpensively in China.
View detail
The name sounds sturdy.
I bought it because of the name Stubborn-kun and its affordable price.
Chain size is 5.5mm, so the sense of security is a little low, but the Key part seems to be sturdy as the name suggests.
The Chain makes it easy to wiggle and install, and it is easy to store when removed.
View detail
![[iMMER] Clamp Bar](https://img.webike-cdn.net/catalogue/images/73029/ks262a_474_400_TS.jpg)
For Navigation
I put it on to use the phone mount.
I am satisfied with the minimum required construction.
View detail
Price suitable
[How is it used?
It was installed from when I bought XJR400R.
I don't like the Smartphone Holder around the Handlebar, so I used it a few times and removed it.
Was the one you received as per Image?
I think it is exactly as pictured.
How was your experience with it?
The comfort of the product is commensurate with the price. I didn't think it was particularly easy to use, but it was sufficient for my needs.
I was concerned about Hold strength.
[Points to note]
None in particular
How did it compare to other products?
I had another Smartphone Holder, but there is a price difference, but, honestly, that one was easier to use.
If it is a low Engine Displacement Volume system such as Scooter, I don't think there is any concern about falling because Speed is not produced.
View detail
Design like a poisonous snake. w
Design like a poisonous snake, emitting warning colors.
Design that appeals to human instinct is also quite w
View detail
![[iMMER] Clamp Bar](https://global.webike-cdn.net/photo/impression/28/28d552c50cb615dffddc2bd9e0677a29L.jpg)
I was looking for something Compact and Simple.
If you put a Switch on the Handlebar...
The mounting location of the Smartphone Holder is
It was installed in a delicate position.
Look for something less conspicuous.
We arrived at this product.
Very Compact
This in itself is not assertive in a good way.
I just hide behind my phone while driving.
I understand that the Material is hard resin.
Screw holes are reinforced with steel 。
The thickness of the part to be inserted into Mirror is 7 to 8mm, so
The length of Bolt should be noted.
You will need something about 10mm longer.
I found a good one.
View detail
Convenient
It is very convenient to mount securely on Handlebar.
It can be fixed stably and will not shift while driving.
The angle can be adjusted freely, and the large, hand-cranked Screw makes it easy to install and remove.
View detail
Purchased for boat use
Drink holders for ships are very expensive.
I purchased and installed Universal Product.
View detail
Hold tight!
The angle and direction can be adjusted freely and it holds firmly, so it is stable and good.
There is no worry that it will fall off.
View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/ks257A474400_TS.jpg)
It's surprisingly useful.
I'm on a Sidecar made in Russia, Ural GEARUp 2015 MODEL.
I bought this to mount my phone instead of Navigation.
Quantity the phone:I have to tighten the Dial on the Right Side to set it.
If you tighten it strongly, it will interfere with the volume Switch on your phone.
So I tighten it loosely enough that it doesn't fall off.
I bought it and used it for more than 1 year and toured Hokkaido, Shikoku and Kyushu.
No one had any Trouble with breakage or dropping the phone etc.
It looks cheap, but it is very useful for us.
View detail
Not too thin, not too useless!
I was concerned that it would be too thin for the Wire lock (personally)... but it was thick enough and flexible enough that it would be easy to use.
Since it is long enough, it can be used to lock the Pole of a sign and the front wheel of a Motorcycle.
View detail
To Earth Rock.
I bought this for my earth lock.
The length, thickness, and construction are perfect, but
After using it for a while, the Cover became tattered.
I would have been more satisfied if the durability of the Cover was better.
View detail
It's stable.
I actually drove with my phone on it and was able to adjust the angle and direction freely and the screen was very easy to see. I don't have to worry about it falling off because it holds my phone stable. When you take it off, it is convenient because it is One-touch with Release button. View detail