Reviews
It was a little long for me.
[How is it used?
After six months of hanghang and Restore&Custom work on the LITTLE CUB, I thought I'd get comfortable with the next stage of the project. First, we need an external power source. I started looking for a USB power supply, but realized that there was no place to install them, so I looked for a Mount Bar in Webike's product introduction section and bought a Multi Bar from Made by HURRICANE, which had a safe design.
How did you like it?
Although I knew it existed until now Messy around the Handlebar. The Mount bar had never been used before because I had the impression that it was too heavy.
The fact that I had a safe length and design for my first Mount bar purchase and I was a teenager. Separate handle (Handlebar of Separate type)". Speaking of Other Brand Products of "HURRICANE It was an Image that I was not surprised to see. Finally, I too will buy HURRICANE products." I bought the Multi Bar at Tension...but the bar was a little too long for my use.
Please don't get me wrong, the product itself was a good product with good rigidity, but for my personal use, I would have preferred a shorter length, so after much thought, I replaced it with a Mount bar made by another company.
We wanted to use a Short Type Mount Bar to make it as Refreshing as possible, since we only need to be able to fix the USB power supply and Smartphone Holder.
How did it compare to other products?
If it is a MAJOR Manufacturer's product. "A damned glitchy piece of junk." I don't think there are any.
Before you buy Which car? of Which part? and there you want to install it in What do you want to install?" I think that Risk can be reduced if you take into account the following before making a purchase.
[Points to note]
This product is a type that is attached to the Mirror Holder by fastening it to the Mirror Holder, so it is easy to set the quantity to a position that is easy to use.:Once set, please tighten and secure each part firmly, otherwise you will be in a hurry if it loosens while driving... (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
As I mentioned above, I didn't even understand the difference between the Mount bar and I didn't think it through. HURRICANE Products I bought this product only because it was a very solid product with no fault of this product over and over again.
【Included Parts:presence or absence】.
Bracket for connecting Mount Bar Body and Mirror Holder, 2 Washers and Spring washerQuantity:1pc. and Nut included.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
It resonates with my father's generation. "HURRICANE BrandName, we look forward to continuing to serve you with a variety of custom parts at affordable prices.
View detail
Exclusive product with excellent cost performance and neat appearance !
Installed prior to purchase of sorting bag.
Therefore, the feeling of use and durability will remain to be seen,
First of all, I was satisfied with the high accuracy of the installation and the simplicity that can be tolerated even without a bag.
View detail
Exclusive products are still good
I had been using Universal Product's triangular side bag support, but it could not support the bag I had installed and the bag made contact with the Tire, creating a hole, so I had to install a larger one.
I did not want to spend a lot of time to select one of the many Universal Products, only to regret it when I tried to install it and had to choose a different one. I have already forgotten how many times in my life I have lost money by buying cheap products.
The large size is necessary and sufficient, and it does not change the appearance of the cool XSR700. The strength is also perfect.
My car is mat color, so I sprayed Primer surfacer and painted it matte black.
I'm satisfied
View detail
I was satisfied.
I think it attaches without problems and has excellent cosmetics.
However, I think that the more Variation of Image photos (Sample?) with products, the more it will lead to sales. I think this is true for other Parts as well.
View detail
Short Type looks more SMART.
Bracket height of Clamp Bar is
The lower it is, the more SMART it looks.
I am happy with Refreshing.
View detail
I used it on the License Plate Bolt! Very effective Large!
The License Plate of a ragged moped from Apart that was left on a commuter route was stolen.
I had a bad feeling that my Scooter License Plate was also stolen.
I will never let anyone steal my number again because I had to go to the police station to reissue the number and the hassle was so bad.
It takes a lot of time and effort to remove it without the Special Tool, so I purchased it for my Number
I think it's very effective Large against theft!!!! (I lost the detachable tool and it's one more quantity.:Buy Set
I had to do it.)
View detail
Now you're safe!
A friend of mine recently had a License Plate stolen and I purchased it immediately. It comes with tools and is very cost effective. View detail
It's a Recommendation, just in case!
I installed it because I am worried about theft if I install expensive PARTS.
The accuracy of the included Wrench is low, but the accuracy of the Screw is high.
If Wrench is lost during maintenance, another Quantity:I am afraid that I will need a Set.
View detail
Tandem:To the Noh!
I had never been able to ride on a Tandem because I was afraid I would be dropped, but when I installed the Made by HURRICANE Sissy bar, the effect was extraordinary. I can now ride with peace of mind! It is easy to install and I recommend it to all Rebel riders. View detail
Smartphone Holder Installation
I bought this one for mounting Smartphone Holder.
It was possible to install the handlebar not by attaching it to the handlebar, but by attaching it to the Mirror Fixing Section of the Cowl Bracket.
It seems to be possible to install it in the mounting position and Bracket's orientation to protrude in the front, or in the back, depending on your preference.
The object itself is coated in SteelBlack, so it is a bit heavy, although it would be lighter with MaterialAluminumBlack surface treatment.
Also, it would be better if the included screws, etc., were also integrated in black so that they would not stand out, but we plan to replace the screws with black ones at a later date.
View detail
There is a sense of security
The material is Stainless Steel and the finish is beautiful, so the quality of the appearance is good.
It is also resistant to Rust and will last for a long time.
It can only be removed and attached with a special Wrench to prevent theft.
View detail
1
12627388584939484839 View detail
1
1211111244322二? View detail
attachment
It's pricey, but the grooves in the included Bolt are too shallow to bite and hold it securely in place. View detail
Standard Parts for American motorcycle
I compared it with the Backrest of OEMOption, but the Pipe is thick and firm, and I chose here that the body can be supported by the Pipe that extended to the SIDE as the Pillion Bar.
The people who rode in the Rear gave it a good rating for safety and it held the luggage securely in place.
I'm happy with my dress-up as American motorcycle style!
View detail
Exactly to the phone Mount.
The SV650X has a separate handle, so I wasn't sure how to install the phone mount, and that's how I arrived at this product. View detail
To prevent theft of Parts
Stainless Steel material is used to ensure the quality of the appearance and the durability of the product. It can be removed and reattached only with a special wrench to prevent theft, so you can rest assured to protect your large parts. It is also excellent in cost performance. View detail
Installation is very simple
Installing HURRICANE is very simple, you can install it with simple tools. I bought it to change the comfort of the back seat passengers. What people like to say is, is the backrest too high? Only 1 inch is the same thickness as the handle. Black painted with gloss also has a texture. The only disappointment is that the adhesive used to secure the rod end cap is easily removed. So I fixed it with a strong soft glue. Because it is to install the tool bag, I did not stick the rest pad on the car body like the picture. I find it difficult to stick it on the car body because this rod is single, but compared with other manufacturers’ products, it is both practical and practical. Cheap. Therefore, it is recommended to those who are considering buying a backrest. So if you think of it as a design, your preferences may be different. But because it supports the waist, you can lean on it comfortably, the ride comfort is outstanding, and the assembly accuracy is very good. ---------------------------------------------- HURRICANE installation is very simple and requires only simple tools you can install it. I bought it in order to change the comfort of rear seat passengers, most people like to say is that the back is not too high? Only one inch thickness of the same, as a handle . Black painted luster texture. The only disappointment that the adhesive when the fixation rod end cap can easily be removed. So I used a strong soft it fixed up. Because in order to install the tool kit, so I did not like the picture, like the rest pad attached to the car body, I find it hard to stick to the vehicle body, because this is a single pole, but compared to other manufacturers of products, it that is practical and cheap. It is recommended to those in need who are considering buying back. So if you see it as designed, your preferences may be different. But because it supports the waist, you can be very comfortable against the above, outstanding ride comfort, assembly ac curacy is very good. Powered by Google Translator View detail
Decent product
In all, good quality and no problems with fitting and chrome. Welding somewhat coarse, maybe Tig instead of chosen method. View detail
GOOD
It's very helpful because there is no clutter around the Handlebar.
I usually attach the Mount Bracket to my phone.
The strength seems to be there as well.
View detail