Reviews
light
I'm thinking mainly for home maintenance.
It's lightweight.
It can be used on the road (Course) etc. from now on.
I'm thinking.
I think it's a good cosmetic…
Personally, I feel that Side Panels are unnecessary unless strength is required.
Now I will have to use it in the future to see how durable it is.
View detail
It is light and easy to use, but...
It is light and easy to handle. However, when used near its load-bearing capacity, the black plastic part and the aluminum frame began to bend. Although it has not broken yet, it is recommended to use it with a margin for weight. View detail
A necessity if you use Navigation on your phone.
The instruction manual was inadequate and I had to think a lot before I could install it.
It is long enough to attach at least 3 different types.
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110
Hmm
The position of the hole that attaches to the center of the Rear Carrier is off. If you don't loosen the screw which attaches to the rear tail lamp side, you can't bring the hole position to the center. If the screw which attaches to the rear tail lamp side is not loosened, the hole position cannot be brought to the center. I'll just have to use Spacer as a bite. View detail
It did not fit Pipe of E25Caravan (tears
Although I bought it for the E25 Caravan's Second seat, but Pipe was too thick to use it. Well, conformance is High ace and of course it is within expectation. I thought that if I changed Bolt to a long one I managed to use it somehow, but I fitted into a different hole perfectly, so I installed it there.
As a result it is lucky!
View detail
Looks are nice.
I got lost as Ethos's Lift Stand, but purchased this way as it looks better. Although it seems like this, the seat surface is small and it is a bit uneasy. However, I wash the car without problem with a high pressure washer. He was fluffy, but - - - I think that I can never use it when a child is playing nearby.
Also, Nut for height adjustment is loose, the seat surface turns round and round. It is locked by Lock nut, but if you do not tighten it quite tightly, it will go around for each seat by the weight of Motorcycle and it will eventually loosen. I thought that the locking mechanism after Lift was good, but I think that there is a locking mechanism also in this neighborhood. There is no problem if you use correctly and politely in the overall review. When you remove Lift, if you release Handlebar and Seat with both hands and release Lever to save it with your legs, Stone and Motorcycle go down.
View detail
I do not move suddenly
I feel it has weight feeling after arriving
I did not move even when assembled.
Tentatively I wondered what to do with power skill
I managed to move while scraping the paint.
After that, fill the gap with Grease
I am using it now..
Well it might be a suitable price
Tomorrow I can use it now without problems.
View detail
Simple design's Tire stopper
I bought it as a stopper of Front tire when loading off-road motorcycle in Transporter.
The photo shows the Front tire of WR 250 R (80 / It is like seeing 100-21).
This product "Stopper to keep Motorcycle from moving forward" , "Can stand on its own without using Side Stand" Please note that it is not a kind of item.
This product is a hole for fixing Bolt to the floor (Φ 8. 5 × 4 places) are free. I think that it depends on the material of the floor, but there is a feeling of uneasiness that it is likely to move if it is not fixed.
In my case I wanted to change the place to load freely, so I bought Aluminum board to replace the floor and made it like a photo. The place where I pasted the same FlooringMatte as the floor of Transporter is really Oshanti (Actually, Matte was just surplus). I cut and pasted the Rubber board as a nonslip on the back.
The width of Pipe is delicately distorted, Penetrating to Pipe and free Φ 8. The hole of 5 is bent, the welding of the bottom plate is subtle, the board is oblique - - And the solid I bought was bad accuracy.
Pipe's Penetrating hole was bent a bit.. Bolt does not get straight in (Tears)
Because it is only a thing that stops Tire, I think whether it is good or not, and even though it is a ready-made product, I have not failed puncturing and welding like this. Do your best.. I also thought that I was honest. (Lol)
■ Dimensions (mm)
Outer width of Pipe touching the floor : About 170
Pipe diameter : Φ22. About 4?
From the end of the bottom plate to the edge of Pipe : About 200
Hole for fixing Bolt on the floor : Φ8. 5 X 4 places (Holes on the bottom plate are Φ 8. 5 and Φ 14. 5 holes are overlapping and vacant. It seems that M8 ~ M14 can be used)
View detail
In Maintenance
Purchased for WR250X Maintenance.
This item is the first purchase.
When cleaning Chain or removing Tire
You can work quite easily.
I am satisfied with the product
If you open the box after arrival parts are out of stock.
I could not use it for about a week without being assembled.
Although that was a bit disappointing
I think that comfort is good.
View detail
The additional purchase of the Option was carried out for the Wheel assembly of a CUB. to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while. Although it was able to take easily, it is not in what has a not m
The additional purchase of the Option was carried out for the Wheel assembly of a CUB.
to use, it is satisfactory at all -- it is -- although -- rust was observed in the Shaft for a while.
Although it was able to take easily, it is not in what has a not much good feeling.
About
use, it can be used also with the Wheel of a thin Shaft and is saved very much.
An opportunity to use is likely to increase by having purchased this Option.
View detail
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the CUB. use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished. and others are sat
[webike Monitor] It is an additional purchase in order to use it with the Wheel of the
CUB.
use top is satisfactory -- it is -- although -- connection used a few for the Shaft, having br(ed) [ were and ] > polished.
and others are satisfactorily easy-to-use.
View detail
[Webike Monitor] It purchased to maintenance of the D-TRACKER. Since the Container of bottled beer was used until now [ ], it becomes very easy to carry out maintenance. Very much satisfied.
[Webike Monitor] It purchased to maintenance of the
D-TRACKER.
Since the Container of bottled beer was used until now [
], it becomes very easy to carry out maintenance.
Very much satisfied.
View detail
strong point - a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth. and stepless height adjustment are Good(s)! and a price are handy. Since the demerit and the top plate f
strong point
- a Lift up can be carried out lightly, and since it is an oil-pressure Bumper, a Lift Down is also smooth.
and stepless height adjustment are Good(s)!
and a price are handy.
Since the
demerit
and the top plate fixed Nut are Singles, a Nut loosens and a top plate rotates.
You should make a Double nut.
and the support lower part protrude.
The Rubber board size raising of the four lower parts of a pedestal was carried out, and the Rubber board was fixed by the Cable tie.
generalization
- it is unavoidable -- ~.
Since he bought it with much trouble, it continues using.
Although the durability of
and a hydraulic damper should be just good ...
View detail
To the extent that the size of a main part and a lift amount are right just. It may shift, when Lift carries out, since the Top plate was not simply stable firmly.
To the extent that the size of a main part and a lift amount are right just.
It may shift, when
Lift carries out, since the Top plate was not simply stable firmly.
View detail
[Webike Monitor] Since off-STAND has not been used until now, it is incomparable, but a STAND can be stood without , especially fault. [ すすす ー っ and ] Also when raising the STAND, a Lift can be carried out without seldom using power, whe
[Webike Monitor] Since
off-STAND has not been used until now, it is incomparable, but a STAND can be stood without
, especially fault.
[ すすす ー っ and ] Also when raising the
STAND, a Lift can be carried out without seldom using power, when taking down, it is the favor whose
Damper is effective, and it can take down, without falling with ガシャン !.
Since it is actually used and the Maintenance has not been carried out yet, it does not understand, but I think that it will large-play an active part when performing Maintenances, such as a Chain, the
Wheel, and Sas.
View detail
[Webike Monitor] He bought it in order to carry out the Maintenance of the Off vehicle. Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま. It may say the beginners with a Lift mechanism.
[Webike Monitor] He bought it in order to carry out the Maintenance of the
Off vehicle.
Since it was the first, there is no instruction manual and usage does not unsatisfactorily わかりま.
It may say the
beginners with a Lift mechanism.
View detail
It is used for the maintenance of an off vehicle. Since the beer crate was used until now, it becomes the comparison with it. Sense of stability: Don't change. It sways. It is uneasy to carry out a tire change in this stand. Taking up
It is used for the maintenance of an off vehicle.
Since the beer crate was used until now, it becomes the comparison with it.
Sense of stability: Don't change.
It sways.
It is uneasy to carry out a tire change in this stand.
Taking up and down: It is very easy and easy.
View detail
The motorcycle leaked in winter and it purchased for business. Since such items were purchased for the first time, it was puzzled, but it does not become straight when it lengthens. (It seems that the character through which it passes may still be
The motorcycle leaked in winter and it purchased for business.
Since such items were purchased for the first time, it was puzzled, but it does not become straight when it lengthens.
(It seems that the character through which it passes may still be used in order to support weight) Although it will be enough practical, texture is made in China, and since it can be considered also to structure with a fine coarse portion, it is the star minus 1.
View detail
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large. A damper is effective and safe, when taking down, 2 and. Locke of 3 and the raised lever can be carried out, and safe. 4 a
As the comment to be used ... Good place:1 and height can be tuned finely and it can be used by an off vehicle at large.
A damper is effective and safe, when taking down, 2 and.
Locke of 3 and the raised lever can be carried out, and safe.
4 and cost performance are good.
Be? Place: If lift up is carried out, it will incline to the part damper side of play of the central part (stanchion) a little.
It is five stars ... and to incline and go up, although it is such touch at a stretch, if mine does not have ? it skill.
View detail
Fits: HONDA CRF250R, HONDA CRF450R, HONDA CRF450RX, SUZUKI RM-Z450, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450F, HONDA CR125, HONDA CR250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE125 14-18 (11mm), HUSQVARNA FE125-501 14-18 (11mm)
It was used in KX85. It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended. It is convenient if you are truly. It carried out in the rate, it rusted immediately, and became tattering
It was used in KX85.
It is very cheap in cost, and since it is completely different when there is nothing when it is, it is recommended.
It is convenient if you are truly.
It carried out in the rate, it rusted immediately, and became tattering, and when the axle slider was attached, it was not able to use.
Furthermore, it damaged immediately, and the plug portion bent and was by carrying out.
It seems to be better to consider consumable goods.
View detail