Reviews
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
tightly packed
It suited my purposes as I could use almost the entire length of the bar from one end to the other.
Quantity:Pair (for Left and Right) If the BALI had been removed, the quality and texture rating would be 5 stars.
View detail
Whoever thought of this is amazing!
I have a motorcycle in my storage room, but when I replaced it with a Kawasaki Z400→KTM 890DUKE, the storage position became very severe due to the increased length. I bought this product because it was recommended to me by a friend of mine who uses it. I was hesitant to buy Stand Mover, but I'm glad I did. I don't know if Large has been around for a long time, but whoever thought of it is amazing. The floor is concrete, so I don't have to worry about it. I think the price is high, but I can't replace it with anything else, so what can I do? View detail
Mirror Bracket board is weak and shaky.
The Mirror Bracket board is clearly not strong enough; the Loose hole is too long and the board thickness is too thin, causing twisting and shaking. I was disappointed that I could not take advantage of the long length of the bar. I felt I had made a mistake when I realized this only after purchasing and actually running with the product. I am very sorry, but I bought another company's product. View detail
Unfortunately, the length was good but the shaking while driving was not calculated.
Since the Meter on MT-07 is directly above the Handlebar, I wanted to place my phone and Car Play Monitor on the upper side of the Meter, so I chose this product with a longer bar length.
The length was good, but the Mirror mount bracket was not able to support the weight of the phone and CarPlay Monitor due to the Bolt1 pc fastening, causing it to shake considerably while riding. As a result, I moved the length of the bar to a shorter length so that it would be closer to the fulcrum. Since it still shakes, I am planning to change to a Bolt2-Bolt Type of Master CylinderClamp from DAYTONA and others.
View detail
It can be installed on 24 years model without any problem.
When switching to the ZX-6R, I was considering where to mount the Smartphone Holder and USB power supply, and I chose either KITACO or WorldWalk's mounting bars. I chose the one from WorldWalk considering the possibility of installing an OEMSteering damper in the future.
Although there was no information on the compatibility of the Top Bridge with the 24 model, we compared images with the 23 model and decided that there would be no change in the Top Bridge.
View detail
Handlebar for high Smartphone Holder with Simple
I am installing it on Mirror to mount a PeakDesign Motorcycle mount bar. So far, it has been installed with no problems at all. View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
Used for GIVI B37
The circumference is a bit large, but it is acceptable.
Depth is not a problem.
View detail
Exactly?
I installed this on a WorldWalk Dax125 OEM color Rear box. It is expected that the Wound will not stick to the Helmetetc. that is put inside. Just be careful with the Velcro as it can get caught. View detail
GIVI E470 and CinderellaFit!
Anyway, it is cosmetic! That's all there is to it.
Box of GIVI in my case E470. The WorldWalk Inner was installed on the
I arrived here with a lot of information, and I would like to send my admiration to our predecessors for their TRY.
Without innerwear, boxes gradually rub against each other, and then sand and other substances accumulate and rub directly against the luggage, causing damage to both sides again.
I used to use a non-slip sheet or something like that, but I switched to a GIVI E470 when I switched to a motorcycle, so I went through various searches and found this product.
*Use for 48Liter
The cost performance is the best. Above all, the cost performance.
It is not a perfect fit, but it can be used without any problems. It is not necessary to use all of the Magic tape provided.
I think it works well enough with just a Point in a good spot. I used all of them without thinking and somehow regretted it.
Motorcycles are subject to a lot of vibration, which can ruin luggage and cause scratches and scuffs, so it is better to have a protective inner like this.
This product is made of Black fabric and SpongeUrethane on the back side, and can be washed by putting it in Net.
However, as I imagine, urethane sponge should gradually deteriorate, so I think it would be better to replace it as soon as it deteriorates.
It will hydrolyze and fall apart....
View detail
Cute Up
I was torn between a black box from GIVI and a black box from GIVI, but I chose the cuteness. View detail
Excellent cosmetics! I hope there will be a boxed version.
This is the second time I have purchased this product and I think it is cosmetically superior.
I also use GIVI separately, but I don't feel any Large difference in the feel.
Lens also has Red and [Color] The Smoke is available in four screws, which can be changed to suit your mood, or you can add an inner screw (sold separately) for a more textured look!
The box is cheap so I can modify the box without hesitation.
More and more recently. Box-shaped." I hope there will be a
View detail
HONDA LEAD125
The fit is perfect and perfect.
However, I am a little disappointed that Hexagonal Wrench is not included.
Those who do not have it need to prepare it separately.
Also, depending on how the bar is installed, it may be difficult to see the Meter device if it is placed in front of the bar, which may cause some inconvenience.
However, Smartphone HolderQuantity:Pair (for Left and Right) I am satisfied that there is quite a bit of room even when fixed at both ends.
I'm glad I bought it!
View detail
No ruggedness.
I haven't run with the side bag yet, so I'm not sure how I will feel about it, but it looks neat because it is a thin Pipe.
I like the fact that the angle can be changed freely, and I think it looks not tacky (in my opinion) without the side bag.
View detail
It is active in our Garage!
Our home-made Garage is 8ft×8ft in external shape.
There is Heat Insulating Material&OSB plywood on the interior plus a doorway, about 230cm deep.
I was going to put the 250TR straight in, but when I put it in, it is not parallel to the wall….
No Space to switch back and forth….
So, a triangular Dead space is created.
I was wandering around the Net looking for a better way and came across this product.
I thought about buying a new one, but when I looked on Mercari, I saw it for sale at a discount price, so I bought it. (It was used, so I don't mind if it had some Wound/Rust.)
How to use,
(1) Put the front wheel in deep enough to hit the back wall.
(2) Stand the car body on the Side Stand.
(3) Insert the Motorcycle Mover into the rear wheel.
(4) Raise the vehicle and push the Motorcycle Mover in with the Right foot.
(5) The body of the car is completed standing on the Side Stand!
It was a little strange to pull the Garage until I got used to it, but this product eliminated the Garage's dead space and made it possible to use the Garage more spaciously.
I'm glad I bought it
(Unfortunately, the Center Stand for ESTRELLA, which we went to the trouble of attaching, is no longer usable due to the lack of a draw allowance in depth …...)
View detail
Box set
Very easy to use BoxSatisfied! View detail
Another Option, but I think this is Mast if you buy the Box!
The company's product 32-Litre 2-Colors Lens Rear Box Exclusive （When I purchased the Rear Box (hwb-32), I read the manufacturer's description and thought it would be better to have it, so I bought it at the same time.
The inner cushioning of the inner cushion is moderate, and the exclusive design allows the inner cushion to fit almost perfectly to the complex unevenness of the inside of the inner cushion. As you can see in the image, even though it is fixed with Velcro in several places, there are still gaps. Just fit." It is not so much that it is a problem, but it is not so much that it bothers me.
Anyway, without such an Inner, the contents will be scratched and it will rattle noisily, so I think it is a must. But cheap!
View detail
I would give it about 7 stars.
It was initially installed on a PCX, then switched vehicles and installed on a VINO.
There are many famous manufacturers such as GIVI and SHAD, but the most important point of this product is that the lid can be opened and closed without key lock. This is the information at the time of my purchase, and other manufacturers may have improved their products, but at least at that time, GIVI boxes could not be closed without using a key lock.
This means that a person like me, who carries a motorcycle key and a box key attached to each other, has to stop the car, remove the key from the Cylinder, go to the rear with the key, open the box, take out its contents, close the box with the key, go to the front again with the key, and insert the key into the Cylinder. I have to go backward with the key, open the box, take out the contents, close the box with the key, go forward again with the key, insert the key into the Cylinder, and so on. This is a life-and-death problem for me because I am a lazy person.
On the other hand, this one can be opened and closed with no lock, or locked only when away from the motorcycle for long periods of time or when valuables are stored in it.
The inner cushion is equipped with the manufacturer's exclusive inner cushion, so the contents are not damaged at all. I have replaced the red reflector, which is common in boxes, with a Clear Lens from Standard Equipment.
Anyway, the product is easy to use, sturdy, and inexpensive.
View detail
The product itself is good, but the details are not so good.
I thought it was a good product because it can be mounted parallel to the handlebar at any distance, so it does not get in the way, and it allows for a sufficient length of bar to be effectively used.
However, the attached washer is a little small in outer diameter and not thick enough, and I am concerned about its strength when attaching the bar to the plate that also comes with the washer.
On the flip side, I could say that the Slide hole in the bar is too wide.
View detail