Reviews
To st250eType!
Anyone with some knowledge can install it without any problem.
Since it is an OEM Product, it feels good installed and gives a retro feel.
The price is reasonable and it is good for custom.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
reassuring
It is a single PDFFile on a single CD with just a diagram and part numbers, but there is a LARGE difference between having it and not having it. It is a reassuring ally when something goes wrong. View detail
It is attached to SEA BASS LETS4.
Can be attached to SEA BASS LETS4 and Palette Basket. View detail
Installed on GSX-R1000R
How it was replaced
I have had no problems with the OEM Caliper in terms of braking performance.
During maintenance (air bleed, Caliper cleaning, and pad replacement)
BreederValve is facing inward, making it very difficult to use.
When attaching and detaching, there is little clearance with the Wheel and care is required.
Caliper replacement was done, and no other Caliper was a candidate in terms of gold value.
Regarding Caliper installation
The Caliper itself could be installed as is without using a collar.
In my case, I used a collar to adjust the length of the bolt (5mm) because I was using a with hole bolt, and the angle of the banjo adapter and the length of the hose had to be changed because the position of the banjo bolt changed.
Brake hose and MASTER are also replaced.
MASTER has a 30mm Caliper piston.
I changed from OEM to brembo 17.
I haven't done a test run yet, so I don't know how it feels.
I am satisfied since the main purpose of the project was to improve the maintenance performance ahead of time.
View detail
It's nice and casual.
I was looking for a helmet lock that was simple, small, lightweight, and unobtrusive, but I could not find one, and then I found a helmet lock that looked just right.
SimpleHelmet lock is a key type lock that is highly universal to fit on the Pipe Handlebar, just like the OEM lock of SEA BASS. (Key case is reappearing)
I purchased it immediately and installed it. It can be installed with only two HexBolts and seems to work fine as is for a short time. (Security measures are necessary when using it for long periods of time.)
The installation took a few minutes and a lot of time, worrying about the mounting position and angle, but it fit easily by the LeftMirror Holder.
It is a SEA BASSOEM Product that is light in operation, can be locked securely, and is easy to use without getting in the way. (It is SEA BASSOEM, but the texture etc. seems to be KawasakiOEM)
The Bolt and BodyReverse side of the unit is particularly prone to rust, so it is recommended to lightly cure the exterior with Chain Lube etc.
Nevertheless, I think that this workmanship with this content is the strongest cosmetically compared to other Helmet locks.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Just fit
Installed on a DL1000 V-STROM 650.
It is a bit time-consuming because four holes must be drilled on the bag side and the attachments must be bolted on.
They seem to be compatible with various car models, depending on where they are installed at the time.
I installed it in-kind.
The tank ring was the same as the sw-motech Bag, so I purchased the sw-motech one and was able to install it without any problems.
Map Case from sw-motech can also be used normally.
It fits the tank shape, is well made, and I love the SEA BASS Logo.
View detail
Fits: SUZUKI GSX-R125, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT, SUZUKI SKYWAVE250 burgman, SUZUKI BURGMAN200, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Buy Merchandise
I think it looks different and better looking. View detail
Easy Texture Up!
[How is it used?
Street Riding Main
Was the one you received as per Image?
It was better than Image.
How was your experience with it?
it's the best
[Points to note]
positioning error when pasting
To be honest, I wasn't looking for texture until I got the product.
In fact, the texture and the look after installation was great!
I got a really good deal.
View detail
SUZUKI Grip Heater
The product is defective. Suzuki service center says grip heater controller is bad Please send parts to Grip Heater control.About quality and texture View detail
Gap-entry theft deterrent device
[How is it used?
One dayTouring installed on Handlebar of MiddleSports vehicle (YZF-R6 13S:2016).
Was the one you received as per Image?
I was surprised to see the SEA BASS logo mark on the body side, which I had not seen on the image.
The bracket that locks the helmet is also thick enough to provide a sense of security.
Was the installation difficult?
Installed by replacing the cf posh universal holder (apparently 10.4mm wide) with a BoltQuantity:It is easy if you look at the Body alone, as it can be installed with 2pcs.
How was your experience with it?
Unlike the U-shaped Helmet lock found in KIJIMA, the locking parts move with the movement of the key, so the key is needed not only when unlocking but also when locking.
Although there is some inconvenience because the key cannot be removed while unlocking, it is appreciated that it can be used for general handlebars regardless of the type of car.
The YK-030 HelmetFirmlyLock cable from Yamashiro is wide enough to fit through both rings, which is what we had hoped for.
[Included Parts:were they on?
It has a bolt that is necessary for installation, but it is a common bolt that can be turned with a hexagonal wrench, and there is no loosening mechanism. Because it is cheap.
[Was there anything that disappointed you?
Maybe it's to put Logo in the key, but I think the key Body is a bit wide. It is easy to grab, but it does not fit into the key case.
It can be installed in a small amount of handlebar space on MiddleSports vehicles. There is no model-specific helmet lock, but if you want to install it, this product would be the Pile of choice.
Even if it fails, it is a minor injury because it is even cheaper than the common KIJIMA and KITACO helmet locks.
View detail
More GSX1300R HAYABUSA-like?
I am really glad I installed it first.
Not Tandem.
It is best suited for those who do not carry luggage.
It looks great.
I thought it was more GSX1300R HAYABUSA-like.
Tail cowl must be removed for installation.
There is an instruction manual, but I watched a video on Youtube and studied it to some extent before I put it on.
If you have installed the Fender Eliminator Kit before, it should be easy.
Don't forget to change the seating capacity on the vehicle inspection certificate if you want to put it on after the car is delivered!
View detail
Easy to install and look great
In addition to the main functionality of the sliders it is very easy to install (provided you have the tools) and look great as well. I highly recommend this set for the GSX-S1000 GT+. View detail
Easy to install and look great
Same as the rear axle sliders, these are easy to install and look great, while providing the necessary protection for the axle. View detail
Top quality side panel enhancement
Very nice product. It make the bike look sporty. Really good quality at a good price. Shipping was fast and value for money. View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 650XT, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
SEA BASSOEM Attachment Bar
For attachment installation and protection of standing chutes from damage.
Purchased using webikePoint after delivery. The order arrived quickly.
It was well made, well shaped, and unexpectedly lightweight.
Installation is no problem with a translated Instruction Manual, which can be found by clicking here. You will also need a torque wrench and screw lock.
View detail
The instruction manual is about Large.
I bought it because there was no instruction manual because I bought it from a used motorcycle shop. The manual was very helpful in setting up the suspension, location of on-board tools, and maintenance methods specified by the manufacturer. View detail
Call for SEA BASSTank Bag
It is very simple to remove the existing Bolt and install the Ring and the special Bolt on top of it. View detail
Great looking and original design
I love the fact that this is a original part number by Suzuki! The sticker is very high quality and fits beautifully on the tank cover! View detail
Fits: SUZUKI Bergman 400 ABS, SUZUKI Bergman 400 ABS
Reliable OEM
I was worried about GIVI and Puch, which are obviously Longer and cheaper than OEM, but I decided to buy it because it is a reliable OEM.
Installation was easy, as per the easy-to-understand manual, and the replacement was done simply by loosening the two screws and removing the eyebrows. Be careful with the well nut that holds the screen. Incidentally, the screws, washers, and well nuts are also in a quantity that seems to be a spare.:2 Sets are included in the package, which is quite kind.
The NORMAL was halfway long, and I got a lot of wind on my helmet, shoulders, and arms. The OEMLong is wide and curved at the top end, which reduces the wind especially on both shoulders and arms. I am 178cm tall, so please refer to my height.
View detail
SUZUKI Air Intake Cover
When you have one side not looking so good, why not just get a new one anyway. The cost was very good and better than I could get from the UK, like a thrid of the cost. Ok, shipping was extra but as I had other parts in the order, it all worked out brilliantly. Arrived with me within a week of ordering, very fast via Fedex Express. Packaged really well and no hint of any damage to the outer box or any of the inner boxes. Well, pleased with my purchase and now the bike looks that little bit better. Thanks Webike for the great service throughout View detail