Reviews
Prices are high because there are no competing products.
I bought it because I can't get UNIT's Shocker Punch, but it is overpriced.
The function is good to be able to adjust Motorcycle by hitting it through the gap without ROSE.
I used it on my CRF250L. UNIT's products are priced right.
View detail
The best, but maybe not all-purpose.
Rumored Cable injector guy.
It is actually well thought out and much easier to use than the traditional Injector.
However, the size of the Cable's length adjustment nut is too large because it is made to enhance sealing. (about M8) In some cases, such as in the case of a Cable, the Injector may not be able to bite into the Cable's sheathing thanks to that section.
Also, sticking Wire× I could not penetrate the Grease with Wire grease with high viscosity.
Anyway, it seemed to work well with low viscosity GreaseorOil, and it is a much better tool than the existing Injector.
View detail
As a primer to make car washing easier.
I used to put my off-road motorcycle on the transporter after a race and ride it home without cleaning the dirt off the body. However, by the time I arrived home, the dirt had hardened into a stubborn stain, making it difficult to wash the bike each time... (And mud falls in the Transporter...) If that's the case, why don't you just clean up the dirt there? So why don't we just clean the dirt off the car locally? I bought this to clean the dirt that gets into the back of the Fender, the footpeg, and the tight spots on the body at the site! I will use it in the future when I have a chance. View detail
Bearing can be driven vertically.
[How is it used?
I bought this to replace the Bearing on my Wheel.
Was the one you received as per Image?
You can find a lot of people who are interested in this type of product.
How was your experience with it?
I bought this to use when typing up my new Bearing.
I thought Hammer would be fine, but since this is my first time doing this, I thought I'd buy a solid tool.
It's a pretty good price. This.
I don't know how many times I'll use it in my lifetime, but it's easy to use and looks cool! w
You need to be prepared to buy it as it's cheaper than ruining your Wheel by making a typing mistake, but it's easy to use.
[Points to note]
It doesn't come with an instruction manual. I used it for Fee Ring, but I don't know if I need it or not.
But I was able to hit it solidly.
How did it compare to other products?
I think it's more reliable and easier than doing it with Hammer alone.
This is my first purchase so I was excited.
Other items that would be helpful
If you have Bearing Puller, this installer, and Snap ring pliers, there is nothing to be afraid of.
View detail
It is expensive to think of it as a driver, but it is useful in Overhaul
Nut hole in FCR Carburetor Body Carburetoretc.Float chamber I bought it for the maintenance of Carburetor, which can access to Jet from I did If you look for it, you can buy a similar Driver at a cheaper price than Carburetor's Settingetc.You don't have to remove the Carburetor and replace the Jet every time It's convenient because you can work with it on Especially for the 4 cylinder Carburetor, it is a recommendation View detail
It is fully functional
It works well as a Gap adjustment for the Spark plug
It's neither more nor less than a feature, but it's beautiful to look at It is AluminumMaterial, so there is no need to worry about Rust
The price is high, but I was satisfied
View detail
How far can we torqued ..
It's quite simple to use, but
When you actually apply a torque of nearly 100 N-m
Naturally, this puts a strain on the chain
I don't know how far that can stand
Tension may be much larger than this, but
I don't feel comfortable unless the Manufacturer teaches you that, or someone else shows you an example the reason is that ...
Currently, Torque is there and Front sprocket's
The washer is bent to prevent it from becoming loose
View detail
It purchased to adjustment of TM-MJN24. Although there is no slotted screwdriver of a size exactly good for throw jet exchange till then and the precision driver was used, it becomes easy to turn overwhelmingly. The tool whose size suited well too
It purchased to adjustment of TM-MJN24.
Although there is no slotted screwdriver of a size exactly good for throw jet exchange till then and the precision driver was used, it becomes easy to turn overwhelmingly.
The tool whose size suited well too is easy-to-use.
The favorable impression was welcomed individually that the porch which can store a set calls it attachment.
However, the rubber of the skid currently attached to the handle can be taken immediately.
May you take, although I think whether it will paste up shortly?
View detail
It uses for timing picking at the time of cam change. Moreover, it is very convenient, if there is a sheet since the characteristics of a cam are also known well.
It uses for timing picking at the time of cam change.
Moreover, it is very convenient, if there is a sheet since the characteristics of a cam are also known well.
View detail
It is hanging on arrangement of T type wrench at the tool box. It is found useful if attached to a cart.
It is hanging on arrangement of T type wrench at the tool box.
It is found useful if attached to a cart.
View detail
It purchased to front fork oil seal exchange of XT. Very much [ it is longer than an ordinary handle and / user-friendliness ]. Since die length is actually required to a slight degree, an extension tube will be used together. Since an automat
It purchased to front fork oil seal exchange of XT.
Very much [ it is longer than an ordinary handle and / user-friendliness ].
Since die length is actually required to a slight degree, an extension tube will be used together.
Since an automatic shop also seldom sees the tool of a motorcycle, webike which can choose goods needed from various goods is very convenient.
View detail