Reviews
Improving maintenance efficiency
A must-have for overhauling your brake master cylinder, the Snap ring is difficult and frustrating to remove without a reliable tool, but this tool is easy to use and catches the snap ring firmly and securely for easy removal. View detail
It's insanely light.
I was wondering if I could choose between DRC's Combo lever and this one for my first tire replacement. I purchased this product. The material is aluminum. There was no such thing as likely to break when using it because it seems to have been heat treated. However, because the thickness of the Lever tip is rather thick, when it is put into the gap of Tire, it is quite Large strange. This is the best solution for the purpose of reducing the number of items to carry. It may be the best solution for the purpose of reducing the number of personal items, but as a Tire Lever, it's a good idea. It might be a little less user friendly. I bought a Tire Lever with a thinner tip, like KTC or TSK, if you're going to replace the Tire at home. It's better. View detail
Low price and OEM style
Motivation The Bar End part was torn and I wanted a Grip at a lower price
[Mounting] The previous one was torn, so I made a cut with Cutter and removed it The installation is completed by making it slippery with CRC and sticking it with Bond when it dries
[About use] I didn't want to put Parts around the Bar End or Handlebar, so the end part I chose Grip, which has a good grip and a good look The grip is not bad, and the look and feel is simple and good
[Others]
View detail
It is expensive to think of it as a driver, but it is useful in Overhaul
Nut hole in FCR Carburetor Body Carburetoretc.Float chamber I bought it for the maintenance of Carburetor, which can access to Jet from I did If you look for it, you can buy a similar Driver at a cheaper price than Carburetor's Settingetc.You don't have to remove the Carburetor and replace the Jet every time It's convenient because you can work with it on Especially for the 4 cylinder Carburetor, it is a recommendation View detail
It is fully functional
It works well as a Gap adjustment for the Spark plug
It's neither more nor less than a feature, but it's beautiful to look at It is AluminumMaterial, so there is no need to worry about Rust
The price is high, but I was satisfied
View detail
A must-have for hard play
It's a necessity if you're going to be snug in the mountains at low speeds
To be honest, you can buy Hose and Bottle at Home Center, but you can fix it to the vehicle and or for the ease of refilling the cooling water, you should buy this one
It is recommended that you install the Radiator Brace at the same time because it is easy to install
View detail
It is Large size for portable (car), but it is convenient for daily use
The short Handlebar length makes it easy to handle
On the other hand, it is too short to be useful in forceful situations, but in that case, you can use the Handlebar part of the I think it is possible to support up to a certain level of torque by using the
The paint on the surface is rough and the finish feels poor, but considering the price, I can't complain
It's a THandlebar, so there's no need to be concerned about it, just a moderate one
It's better to turn the force (Oh Gold) towards the Socket that makes contact with Bolt/Nut I think
View detail
This is an Ideas thing! It's pretty good
I bought it to try CableLube injection 。
I was wondering if it would be a good idea since it's 3-4 times the price of a regular Cable Louver, but it looks interesting Purchased
It may be a bit of a hassle to set up the installation (injection side & discharge side), but which Cable It's the same with Louver, and I've done it myself, so it should be easy for you guys
I injected the reputedly hard YAMALUBECable lube, which I completed with almost no leaks!
A little leak from the rubber packing at the end of the front side of the photo (anodized thin tube) But it's acceptable 。 An abacus-like rubber that attaches to the Wire's Guide in the Cable LouverV3 There's packing in there, but none of it leaks from there!
I have a feeling that lubricating the Accelerator Wire will be a piece of cake with this! 。
I'll try it soon as it looks like it could be used for bicycles
Cable lube won't go to waste, and if you have one in your family, it may last a lifetime
View detail
Very useful
Chain tensioning is a basic maintenance requirement for a very large piece of equipment It seems relatively easy, but I think it's very deep Too much tension can damage the Mission, deteriorate the movement of the rear, or at worst break If it is too loose, the chain may come off, noise, shifting shocks, etc Motorcycle Lifespan, Quantity that can Large to Fee Ring:Pair (for Left and Right) You will do it Some people ask the motorcycle shop to do this work, others do it themselves The amount of tensioning is set for each car model, but the amount of tensioning is the same for all cars There are some shops that have a lot of problems with this product So you can check and adjust the tension yourself more easily than with a ruler or ruler It is very convenient for the large because it can be measured reasonably accurately and your hands are not dirty The initial model that has been sold before has a narrow measurement range, and it is not easy to measure it by the shape of the Swing Arm, etc I was not able to measure in the first two models, but this one with this Model change has a much larger measurement range This is a good product for most car models We recommend this product for those who do maintenance on their own View detail
How far can we torqued ..
It's quite simple to use, but
When you actually apply a torque of nearly 100 N-m
Naturally, this puts a strain on the chain
I don't know how far that can stand
Tension may be much larger than this, but
I don't feel comfortable unless the Manufacturer teaches you that, or someone else shows you an example the reason is that ...
Currently, Torque is there and Front sprocket's
The washer is bent to prevent it from becoming loose
View detail
MP Clutch Holding Tool
-Perfect fit for my clutch basket on R6 2007. -Easy to use. -MR tool is outwardly pleasant and convenient -Ideal to my clutch basket on the R6 2007. - easy to use. - The tool MP is externally pleasant and convenient (translated by Google Translator) View detail
It was a good way to get rid of Smaller Bearing
I used it to replace the Bearings on my ADDRESSV125
The large bearing of the diameter had been removed by Driver etc., but Because the inner diameter of the address is 10mm and small, it was not able to be removed by the driver I was able to remove it easily after using this product
Quantity:It was less expensive than the Bearing Puller sold in the Set
View detail
Feeling easy and good
Attach to FCR Carburetor Body equipped vehicle with CB 750F. Purchase because there is no outlet for synchronization. After purchasing a Vacuum gauge it is possible to tune at any time! I think that the person who will be serviced by himself is good. View detail
JIS type Bits
These are good quality bits if you are looking for JIS type bits. These fit in Japanese type screws much better than normal philips screwdrivers. The JIS type doesn't "cam" out like philips screwdrivers do. Because they are bits it means that you can put them in a socket driver or torque wrench so you can apply correct torque or remove stubborn screws that normally wont budge with a normal screwdriver. See the difference in bit sizes between #2 and #3. The #3 is really quite big and the #2 is quite small. There is a bigger difference than say in a set of Hozan JIS type screwdrivers so this will be a good addition to your toolkit (the #3 is bigger than a Hozan #3). View detail
This one is amazing!
- - - Can you see it in the picture?
This little impression of me - - - (Lol)
In three directions, hexagon is 4 mm - 5 mm - 6 mm, and
Where elongation, 8 mm in BOX - 10 mm and
It is said that 12 mm can be replaced and used
Ultra - Suguremono - - - (^. ^)y-.. o ○
Although there are cases where it is difficult to use a narrow place
Anyway, this "Convenient goods" To
I was deeply impressed!
It is not the best way to use it like an on-board tool!
View detail
It is not the Type with which the scale is dug in the stainless board (it is expensive). It is the product in which the scale is printed to the board of the Aluminum. The sake It is a price which is easy to purchase. Since it was a product made from
It is not the Type with which the scale is dug in the stainless board (it is expensive). It is the product in which the scale is printed to the board of the Aluminum.
The sake It is a price which is easy to purchase.
Since it was a product made from
Aluminum, it was easy to carry out hole processing by which a Box wrench goes into a Center.
For the printed product When it treats violently in a tool box, a crack may be attached and a scale may become hard to see.
It is likely to care about storage.
Also when removing from the Pulley stuck with
double-stick tape Since there is no rigidity at the product made from an Aluminum, it is likely to bend.
It cares so that the area stuck with double-stick tape may also become the minimum.
View detail
although it is the compactness considered to be the best for an in-vehicle tool -- -- the variegated usage, various Tool nature , etc. -- there is a thing made to groan very much. -- sure -- a Compact -- therefore -- although there is al
although it is the compactness considered to be the best for an in-vehicle tool --
-- the variegated usage, various Tool nature
, etc. -- there is a thing made to groan very much.
-- sure -- a Compact -- therefore -- although there is also a portion which is hard to use --
-- I think that it is greatly Ariari if it is considered as
in-vehicle tool which has necessity in the thing which it does not have, and which can use for the time being.
Aren't there even
, now a user that has mastered no usage ^^ It is a hidden work full load, so that; can be thought.(Smile)
View detail
It is a considerate tool kit. If it is sheathing and a carburetor, it can decompose enough. It was OK even if it made it together with an in-vehicle tool, since it was compact.
It is a considerate tool kit.
If it is sheathing and a carburetor, it can decompose enough.
It was OK even if it made it together with an in-vehicle tool, since it was compact.
View detail
It purchased to adjustment of TM-MJN24. Although there is no slotted screwdriver of a size exactly good for throw jet exchange till then and the precision driver was used, it becomes easy to turn overwhelmingly. The tool whose size suited well too
It purchased to adjustment of TM-MJN24.
Although there is no slotted screwdriver of a size exactly good for throw jet exchange till then and the precision driver was used, it becomes easy to turn overwhelmingly.
The tool whose size suited well too is easy-to-use.
The favorable impression was welcomed individually that the porch which can store a set calls it attachment.
However, the rubber of the skid currently attached to the handle can be taken immediately.
May you take, although I think whether it will paste up shortly?
View detail
Since the manufacturer's T handle had become phaseout, it purchased. A price is handy and it can adjust die length by extension. Although a ratchet handle is inconvenient to turn pushing, this product tends to put the power from a top. One is
Since the manufacturer's T handle had become phaseout, it purchased.
A price is handy and it can adjust die length by extension.
Although a ratchet handle is inconvenient to turn pushing, this product tends to put the power from a top.
One is a tool to arrange.
View detail