Reviews
Seal mounting is easier.
I am concerned about the durability of plastic, so I prefer DRC's Stainless Steel tool, but it has been out of stock for a long time. I would prefer to use DRC's Stainless Steel gloves, but they have been out of stock for a long time. It is inexpensive, so I can just give up and buy a new one if it breaks. View detail
As a primer to make car washing easier.
I used to put my off-road motorcycle on the transporter after a race and ride it home without cleaning the dirt off the body. However, by the time I arrived home, the dirt had hardened into a stubborn stain, making it difficult to wash the bike each time... (And mud falls in the Transporter...) If that's the case, why don't you just clean up the dirt there? So why don't we just clean the dirt off the car locally? I bought this to clean the dirt that gets into the back of the Fender, the footpeg, and the tight spots on the body at the site! I will use it in the future when I have a chance. View detail
Used in CRF150R
Used on CRF150R.
It does not seem to be a common Size, but it is easily available.
View detail
Made of high quality Stainless steel!
It is easy to use because it is expensive and the Tray section is thick and quite stable (heavy in weight).
Stainless steel is good… expensive but lol.
The Week Point is that the Magnet on the back of the Tray came off (fixed with glue) … It's expensive, so please make it more durable lol.
View detail
Excellent price, fast shipping and a quality product!
High quality flywheel puller. Motion pro always produces quality products that do the job! It's pretty cheap, so don't try to lift your flywheel. Take the hammer and do it right. I've used this hammer several times and it works flawlessly. Just keep the gears lubricated.. I bought this to remove my Honda's flywheel. The flywheel hammer worked like a dream. I can't say anything bad about it. The price was great, shipping was fast and the tool did exactly what I needed. View detail
works well and easy to use
Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes. Used on both my clutch, and my flywheel. This tool worked well and saved me alot of time when disassembly and rebuilding my motor. Built with quality and easy to use. This tool is a must for engine rebuilding View detail
Great product for all chains and even better for oil ring chains.
Motion pro makes great tools. Thanks to Webike, I'm quick to pick up and try. Since getting this tool, I've made loads of chains for myself and others. Good build quality on tools and parts. If you see criticism of people breaking and hurting ropes... just ignore them. 99% of these people did not disassemble the tool when they received it and greased all the threaded parts. This tool can be put under a great deal of pressure during use. Screws exposed to high pressure during operation must be lubricated. The tool works flawlessly. Another tip is that if you are breaking a riveted joint, sand the pin heads flush with the side plate before trying to push the pins out, as you will need to replace it in any way. This takes pretty much all the stress on the tool's pin driver as you don't have to push a cork pin down a smaller hole. It takes just 10 seconds with a grinder to grind each of these mushroom chain pins flush with the side plate. The storage box is well made and compact enough to carry with you when you travel if you want. Worth the extra money because it makes the job so much easier. View detail
Perfect for Chain cleaning!
I bought it with ChainOil and MaintenanceSTAND because I found Rust after a short while of riding in the rain.
The shape was made for Chain and the bristles were hard and good for removing Rust.
I feel that it can be applied evenly when applying Oil.
View detail
Love this tool!!!
When I re-grease the linkage on the rear suspension there's one nut (connecting arm to frame nut) that I can't get a torque wrench on because there's not enough room. So I've been tightening it without the torque wrench wondering if it's too tight or not tight enough. Didn't want to spend the $ for one nut. Finally after several grease jobs and worrying about that nut I decided to buy the adaptor. The instructions were easy to follow. I was able to use the adaptor at a 90 degree angle to the torque wrench so I didn't have to recalculate the torque. The tool works awesome and I tested it to some other nuts that are accessible with the torque wrench alone. Spot on! I basically bought the tool for one nut but I'm glad I did. I am a wrench head and love to work on my bike and want it.done right. To me it's worth it for the peace of mind. Nice addition to the tool box!! View detail
Love this for my bikes plugs!
I haven't bought a gap tools for over years. Turns out mine were all too big. This fills the bill being light and easy to use.Handy tool to have in your moto box. Well made, durable, works as it should, and looks cool as well! No complaints here.I use it more to open a nice cold adult beverage than i do for gapping spark plugs, but it works great for both! View detail
Smaller than expected, but totally does the job. Very durable
This didn't fit perfectly as I had hoped, but I can't fault it much since it is a universal design. Some reviewers are complaining the tool is susceptible to damage - since it is aluminum and basically designed to jam the equivalent of a miniature wood chipper, you shouldn't expect it to withstand substantial torque. I bought two just in case and used them to do a valve job on my 2013 crf450r instead of the expensive factory Primary Gear Block tool without removing the clutch. I was able to jam the cam gears as well as the primary gear, though I was careful not to transfer too much force onto the cam chain by using secondary locking methods to spread the forces. I also used it as a secondary lock in conjunction with a large crescent wrench for removing the flywheel, eliminating the need for the pricey factory Flywheel Holder tool. NOTE: There is nothing in the Motion Pro line designed for automotive repairs. Though it may work on cars, this tool is intended for motorcycles. View detail
Great little coolant recovery system that was easy to install.
2 week standard shipping was nice turnaround, and it definitely was less expensive than the other tank carried by this vendor. It was a little difficult to find a suitable mounting location on my Honda CRF450 but it was worth the effort just for the peace of mind knowing the radiators always are full of coolant. The coolant reservoir is well made and was easy to mount and plumb. It came with everything needed but I used better zip ties. The size is easy enough to fit many places. So long as I can see coolant in the overflow tank I know I am good to go. Even if it gets a little too hot while sitting still it sucks the coolant back in when run start moving again and it cools a bit. There is good reason that all street bikes and all autos have these. View detail
cheap and good
Replaced old grips on an Crf250 with these. My son liked the feel. Basic cheap grips that get the job done. Why pay more?They are not super soft but not rock hard and fit great.The grips did last but he end did blow out after he laid the bike down on the asphalt. No harm to the actual grip, just the end cap. View detail
Useful but not necessary?
Pretty simple tool for more piece of mind when doing chain adjustments. Works well on my bikes. I put the tool on just to see if my current alignment was good. It is, but the tool confirmed my suspicion that the alignment marks on my swing arm are not stamped symmetrically. I eyeballed it prior to purchasing this tool. If you have calibrated eyesight, an alignment tool isn?t really necessary. But, this is an affordable and useful little device to make the job a tad easier. If you have deep pockets, I imagine the laser alignment tools would be the way to go.When done, rear wheel spun more freely and with less noise. Simple and quick to use! View detail
Perfect tool for the job!
I was a little skeptical about this tool working as promised, but I'm happy to say it got the job done pretty well. ther than the fact that you need both tools, it was worth it for me because I have multiple bikesDefinitely recommend to have for steering stem bearing removal and installation!! Makes a dreaded job so simple. Takes longer to set up tool than to get the bearing off. No cutting, no beating. Pulls bearing off with NO damage to stem or clampsWish they were not as expensive as they are since it's such a specific application but it really does work like a charm. View detail
I diverted it to Car.
I diverted it to Car. CHARGE cooler (Water-cooled intercooler) The vehicle does not come standard with a reserver tank for the radiator tank, and the overflow is discharged to the outside. Now I don't have to bother to open the radiator cap to refill the tank with coolant.
I had no hesitation in ordering from WeBig, a trusted Motorcycle supplier.
View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail
Convenient
Fluid replacement time is totally different without it. I use Astro's One-Way Valve. Highly recommended! View detail
It is a good Brush.
It washes Chain well.
You can wash the Tire by simply turning it by hand to scrub it.
It would last about two years.
View detail
Multi Purpose Tool
I saw an article in some media that said it was a must-have for off-road motorcycle riders, and I had to have one, so I bought it.
It is rather solid and seems reliable.
I think it is sufficient as a tool to be carried at all times.
Carried with Small TypeMONKEY Wrench
View detail