Reviews
It was useless..
I did not match pcx! I ordered it by looking at the impule that conformed to pcx, but unfortunately it did not fit. There is no help but I give it up.. To be sorry View detail
Not attached
CB 1300SB I purchased it for 2018 MODEL purchase.
Since the actual car came to hand, I could not install horizontally by interfering with the bottom of Clich's Oil tank and Brake's Oil tank when I tried to install.
I could not check if I could install it by MODEL until 17 years, but it was Large failure.
If you do not mind even if it is not horizontal please.
View detail
It is good.
After all it is a good Handlebar. I used Red color until now, but after 21 years
Anodized Processing faded, I replaced it because it became a mottled pattern.
Next time I turned to Titanium color which seems to be fading stronger.
The nice thing about Handlebar is that Handlebar itself absorbs vibration, so your hands are not numb,
Elbow and shoulders are also easy to get tired, even if you travel long distances, you can reduce the number of breaks.
Some people think that this softness is anxious, but I want to run a long distance at a stroke
I think that I brought it to people.
It is Handlebar which can not quit once using it.
Even compared to other Handlebar's price, it is considerably cheap, so please add another color for another change, another one
You can buy it..
View detail
I am satisfied..
I think that the price that I think is lighter and shock-absorbing than OEM is cheaper compared to others and I think that it is reputation. Medium is used for DT 200 wr but it was a form which was quite similar to OEM when arranged side by side for reference. View detail
Good
Thinking that it is close in dimension to Handlebar I was looking for, purchased this time. Compared with Large hand maker property in terms of price, it is cheaper. As the withdrawal is Large, when attaching the Handlebar Guard you need to extend the mounting bracket. It is a difficult point to have few color choices, but there are circumstances of Large people there. View detail
I can not affix it
MASTERCylinder interfere and installation is impossible
Those who purchase please note
If it is Very short it may be attached, but I have not purchased it so I do not understand it
View detail
Satisfied
Angle adjustment of GUYRA Shield Mount the gold fixture Measured because the mount was a cheap The same diameter as the Handlebar.
So before with Handlebar Brace Quantity : Pair (for Left and Right) Two places are 22. I remembered there was a thing of 2 mm and I thought that I should install it on it.
At that time incidentally totally 22. I found this item of 2mm. If this is the case now you can relocate anything attached to Handlebar and Handlebar will also become Snap and buy it as one stone two birds with one stone.
Result Large Correct answer.
View detail
Hinge formula is convenient ....
HURRICANEPipe Handlebar Kit (ZX-14RABS) The mounting. Size is S.
Hinge formula for installation work is Large changeable It is convenient and convenient. Texture and color are also good. It seems that the surface treatment is rustling like a Satin fabric and it is easier to have a Wound when clamping than the thing of the slippery.
But this low price is attractive. Was this review helpful? I do not think I can be convinced without buying expensive items.
View detail
Easy installation. I am satisfied..
I was looking for Handlebar Brace because I thought it would be nice to have a smartphone around Handlebar.
There were also cheaper ones but before Bandit also HARDY 's Handlebar (with Brace) As I used to use it, I chose this with trust and achievements.
When collecting information on Size, Size finds that there is a person using Medium at the same V-strom, selects Medium. I had a lot of trouble in color, but I made it to Silver after all.
Installation is simple anyway. However, due to the personality that I care about, I spent a bit of time trying to check if the installation is not diagonal. (^-^;
I am satisfied with the product. (*^-^*)
View detail
Making is good
I attached it to the Handlebar of BANDIT. I bought it for the purpose of wearing the camera of Goo PRO. It was as expected! There is a feeling that rigidity has also increased, there are two birds with one stone at a time.. Painting is also beautiful so you can recommend it. View detail
There is Custom feeling
It was installed in 2003 dTRACKER.
Handlebar was decided to be Gold because the exterior was Black.
Yellow I was imagining a sexy gold, but it was an Orange-like gold. But I think that this color was good.
If you do not change the handling of Clutch Wire a bit, it is tight when cutting Handlebar to Left.
I could afford to change the way we walked.
View detail
Good vibes
Today, I purchased it at nearby Shop and attached it to CB 1300 S B.
Correct answer by choosing the same color Silver as Handlebar.
Easy installation is possible with 3 minutes as well.
I did not interrupt the AccessLine to the key.
View detail
Easy installation -did not use the washer so that it sits flush against the grip and looks more seamless (like one piece), otherwise there would have been a gap between the bar end and the handlebar. Not a fan of the large logo text so deducted points for
Easy installation -did not use the washer so that it sits flush against the grip and looks more seamless (like one piece), otherwise there would have been a gap between the bar end and the handlebar. Not a fan of the large logo text so deducted points for that but otherwise a very good product! View detail
It was good!
There was numbness in the hand with long distance touring, but it was improved considerably!
Quantity : 2pc. Since I purchased Set and attached it, 1 pc. The wearing feeling of minutes is unknown - - -
View detail
It is easy to install.
I have purchased three times so far, but with the reinforcement of Handlebar
Sumaho etc. It is useful for mounting Items.
However, although Handlebar's Length is expressed as a standard,
To the last, please refer to the reference level.
Quantity of the actual car's Handlebar : Pair (for Left and Right) It is better to measure the rising width of
I think it's good..
There is no dissatisfaction with the product.
View detail
Custom feeling is good.
Purchase for the purpose of raising Handlebar synthesis of ZrX 1100 and reducing fine vibration.
Length is Medium.
Clutch masterCase and Brake masterCase on Handlebar (Both NORMAL things)
I was worried that it might interfere, but it was just barely safe and could be installed as it is on Bolt-on.
Regarding vibration, it is somewhat fitted, but there is Custom feeling, I like it.
View detail
It's just right.
I used it with TriumphTIGER.
Because it is a Multi Motorcycle that can also run Off,
Hey, Handlebar wide and linear.
I feel a little Large in Japanese physique.
width - I feel just fine with both stops.
I feel a bit lower than OEM
I do not run Off-road, so it's a good feeling.
View detail
MappleHolder mounting bar
Touring mappleHolder I bought it for my own work. There is no dissatisfaction in the quality of the bar at all. It's even better if it's a bit longer ... I will make MapBracket from now View detail
Is Handlebar
After all, I bought Row and Intermediate from Medium (It is the third one).
Medium is expensive, it is useless if you image SUPER BIKE
, Maru was pursuing ease of riding.
Row is still low, if you pursue the shape you'll be Maru.
But I am tired. - - - Because it is already an age, impossible is impossible.
So, I purchased Intermediate this time.
Height does not change so much like a row, but I feel the difference between the width and Handlebar drooping angle.
I feel a little wide, but it is a range that I get used to.
I think that I do not feel the difference between Row Handlebar and Style,
Handlebar difference in width is felt by low speed corner.
SUPER BIKE Image + I do not want to get tired (Not young) Time is not confusing.
View detail
I like the shape - - -
Bar End - - - I used a gun round shape until now but I can not get used to it.
this time,
Although I thought that it was a good shape, I did not understand it..
First of all, the color of the attached Bolt ... There is no Silver of Stainless Steel!.
I try to install and rotate with insufficient tightening ...
After all I have to fix it tightly !!
I am replacing the installation Bolt.
I am satisfied with this.
View detail