Reviews
Fits: SUZUKI 250SB, KAWASAKI KLX250ES, KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI D-TRACKER, SUZUKI 250SB, KAWASAKI KLX250ES, KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI D-TRACKER
It needs to be processed
[How is it used?
Introduced to run Amazon with D Tracker (lol)
Was the one you received as per Image?
It has a nice poofy look, but it is subtle and precise.
Was the installation difficult?
It needs to be machined without any questions. The front of the skid plate interferes with the protrusion of the frame, so it is necessary to shave the plate and make a clearance. The Tracker & KLX originally come with an OEM aluminum Small Type Skid plate, which can be installed over the skid plate.
How was your experience with it?
As described in the product description, it makes it easier to get over obstacles, reduces mud stains on the underside of the engine, and makes it easier to lift the engine into and out of the maintenance stand. Although the drain hall is open, it is safer to remove the skid plate when draining the engine oil, even if it is troublesome. If you remove the oil without removing the skid plate, the inside of the skid plate will be covered with oil.
[Included Parts:were they on?
A complete set of brackets for installing skid plates is included.
[Was there anything that disappointed you?
Where it is not Bolt On.
Other items that would be helpful
Point of installation and hang:Processing is required.
Availability and clarity of Instruction Manual:There is no such thing as a helpful Instruction Manual.
Note:If you are not able to do the processing, ask a motorcycle shop to do it for you.
Opinion or request to Manufacturer:Please make it possible to install with Bolt On.
View detail
Installed on DJEBEL250xc
The frame of DJEBEL250xc is White, so I bought White to match it.
The installation was quick and easy with no problems.
Temporarily fasten it, and check the hole of the oil drain, and adjust and tighten it.
It looks very simple and unobtrusive.
I'm going to a forest road where there are a lot of rocks, so this will give me more peace of mind! The price is a little high considering the quality, but it's better than a broken motorcycle!
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Replacement for AluminumUnder Guard
I changed from the AluminumUnder Guard to a lighter one because I don't run on harsh forest roads and other places where I hit my stomach anymore. But it seems to be enough to guard from small stones and gravel hits. I do not think that there is no such thing. (It may be that the AluminumUnder Guard of Wise GEAR was not that heavy either)
You can install it on the Level, but the Bracket (Spacer?) used to tighten the Bolt is not the same as the Material.:How is it thinner than the thickness of PlasticBody? I thought. (Material:Plastic, but does that mean it's hard?
As for the cosmetic, considering the quality of the AluminumUnder Guard from Wise GEAR, the price is indeed high.
I would recommend it if you can get past that.
View detail
Fits: HONDA BAJA, HONDA XR250R, HONDA XR250, HONDA XR250
Good product
I installed it on my XR250 ME08 and put a PClamp on the frame pipe This is a screw-mounted type product
MEO8 comes with an OEM Pipe Type Guard, but I had to install a Plate Type Guard that could not cover the stones, etc. I had to install a Plate type Guard which could not cover the stone splash etc For forest and Dirt driving, this product is more like this one for StirCase Material:PlasticGuard is considered sufficient and the Material:I choose Plastic:It's also good that it's hard to get Crack and Chatter like Aluminum
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250M
Things are good things...
I arrived at CRF 250 L.
I think that RALLY 50 feeling may appear as it looks.
I have not run yet, but I can not feel the reverberation of Engine much.
Frame can also be guard up until just before Rear Suspension Link.
However, since it is not mounted so as to follow the Frame, we do not recommend using Lift jack with this product installed.
And although it is mounting on the side of the mount plate, since Rubber parts are used, deterioration is a concern. As a countermeasure, I would like to manufacture a 5 mm mount plate and mount it on Bolt nut with its anti-vibration Rubber clamped on the mount plate.
It is one item recommended for people who can process for a while.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
The best Guard for MOTARD of paved roads and forest road Main
I installed it in WR 250x this time.
As a purpose, it is prevention of dirt adhesion to Engine part.
When it is Aluminum's Guard, I hear that the reverberation heard in Review is bad and X. Carbon will be expensive. Where I was looking for various things, I came to CYCLE-AM.
The contents are only Body, Washer, Bolt. Although there is no Instruction Manual for installation, I think that it is understood in the atmosphere how to install.
Regarding Material, I think that it is very good as a plastic, elasticity and lightness.
As for the installation, the Bolt hole was still slightly gapy. But something that is overseas made somewhat lacking in Fit feeling is like a promise and it was possible to install without any problems if adjusted slightly with File. That is one of the pleasures and there is nothing wrong with it.
Screw lock properly to prevent Bolt loosening due to vibration.
I ran after installation.
Engine sound will be heard as you increase the number of revolutions again.
But is it better than Aluminum?
As long as it covers the Engine part, it is acceptable because there are a lot of things like that.
After traveling, I tried checking the Guard, but steadily and stepping stones etc. Although there was a dent due to this, I think that the role is firmly fulfilled if I think that the Engine division is protected by this.
It looked a little better and I was happy to buy it.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Large Since it is a dish Machine, I attached it
- Gold generators such as Aluminum and Titanium are concerned about the echo sound of the Engine and will not return to the original even if it is indented Material : Search by Plastic is not found elsewhere, so select here. Material : Engine sound echoes slightly in Plastic.
- At the time of installation, other people also commented, but the position of the hole does not match a bit. Also, because the Screw hole on the side of the car body Frame is covered with the paint film at the time of a new car, once it is scraped with Tap, it is good both on mental health and workability.
- I rubbed down the belly with a rock a couple of times, but after returning the item here, I came home with a smile. It makes me creeps if I think that it is not attached.
- Oil It is necessary to remove it when exchanging, but it does not become painful because it also serves as a cleaning. If you cover up to 2 ~ 3 centimeters above you are 5 stars.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250M
Mounting on CRF 250 L
Under the OEM Under Guard it is impossible to prevent stepping into the Frame at the bottom of the Engine. It can be pretty wide to prevent a wide range by installing this so it is safe to run forever roads exactly.
Installation Instruction Manual is English version but you can manage it somehow by looking at the photo.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It chose by functionality and a Weight in having examined the Under Guard. I think if the hole of the Drain bolt is open although attachment also has no problem at a Bolt on.
It chose by functionality and a Weight in having examined the Under Guard. I think if the hole of the Drain bolt is open although attachment also has no problem at a Bolt on. View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Attachment is completion in 3 minutes. Although it seems that a mounting hole may not suit in the object for other vehicle types, in the object for WR250R, it is bolt on satisfactorily at all. Although it also had the skid plate made from aluminum
Attachment is completion in 3 minutes.
Although it seems that a mounting hole may not suit in the object for other vehicle types, in the object for WR250R, it is bolt on satisfactorily at all.
Although it also had the skid plate made from aluminum in fact, the echo of the engine noise was greatly unpleasant in town riding.
With this product, there are few echoes and they are comfortable.
Although reinforcement is excellent in the thing made from aluminum, this one is recommended at daily use.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DJEBEL250XC
Please think that and also attachment does not go simply well since it is a product made from a united states. [ a price ] The location of a screw hole does not suit. A hole is not a true circle but an ellipse, and moreover, a cross section is sla
Please think that and also attachment does not go simply well since it is a product made from a united states. [ a price ]
The location of a screw hole does not suit.
A hole is not a true circle but an ellipse, and moreover, a cross section is slanting and is structure of a schoolchild's work level.
Therefore, inner DJEBEL250XC has not performed attachment of one-place attachment stay.
View detail