Reviews
![PIN SYSTEM SHAD Product Number [X0SE04P/X0SE10P/X0SE16P] Exclusive Fitting](https://img.webike-cdn.net/catalogue/images/48356/13936747_1_TS.jpg)
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Case of another Manufacturer.
We were looking for a case from another manufacturer, but when we tandem the case, my daughter said it was too stiff when she leaned on it....
The included Screw cannot reach it because of its different shape, but we were able to change it to 40mm and install it.
It seems to stick out a little, but in my daughter's opinion, it is GOOD!
View detail
Only for car models
No unnecessary messing around.
I think it is a SimpleSMART product.
There are drawings for drilling holes, etc., which are kind, but
Translation (would have been more polite if it was please type here…
View detail
This is it!
I was using GIVI's E370 but wanted just a little more capacity, so I bought this one.
Size and capacity as expected, no complaints.
No complaints about the quality.
It is also good that the box can be opened and closed without locking the key. (*´∀`) b
I use the Rear box for my commute to work, and I can't stop using it.
Spec. above, diagonally (Trucketc.) I'm thinking about adding a Stop-lamp to the box, because the Stop-lamp becomes difficult to see from the …
View detail
Mounting Hardware should be checked and considered.
It is a UniversalBase, but the included mounting hardware is almost unusable. Other than that, no problem at all. View detail
Installed on GIVIRear boxE26N!
I was looking for one that would fit for my GIVI 26L.
Align it with the R, position it, drill the holes, and install!
Feels a little firm, no discomfort at all!
View detail
Good comfort, and the design is great!
Grab Bar Carrier made by DAYTONADAYTONA [Daytona original] Toppings to
The BracketBolt/Nut things that came with it were not very available Sweat
We went to the home center many times and went through a lot of trial and error As a result, the method of fixing the car body with the joint plate of a thick plate together with the U shaped bolt A sturdy fixation is achieved as if it were part of the package
The Full faceHelmet(L) in the image is stored when the contents of the Top case are empty It is possible If I think only of my own use, I could have installed a Top case of around 50L
More than 3 years have passed, but there is no water in the Case at all, and it is a strong ally for rainy weather riding!
View detail
Also attached to DL 1000 V-STROM 650
2017DL1000 I was looking for Fitting kit to attach Top case to V-STROM 650
The most valuable thing was this SHAD. We are not listed in the applicable model of Big,
Since it was able to be searched as applicable model in the overseas site, I bought it.
However, it does not use another Bracket like GIVI and just tightens it to Carrier installation Bolt,
I do not need the hard case, it is Recommendation for people good at around 40 L.
Base has only necessary holes, so if you are good at machining you can add additional holes
It may be used as an inexpensive Base for other companies' carriers.
View detail
COSPA - Satisfied with the use feeling
I bought it with CROSSCUB acquisition. I also considered other Manufacturer items, but I chose this product on the Cost side. Easy to install, capacity has plenty, Helmet and Rain jacket go in. A tour of about one night is enough. I am satisfied with no problem in terms of use. View detail
Convenient to take out necessary items right away
For the first time, I installed the Top case. Small It is a little, but it was Large enough to put rain gear and items not wanting to get wet.. A little Case itself seems to be distorted, but there is no particular problem. Because it is easy to detach, it is removed when not in use. View detail
It was a lack of confirmation
I purchased thought to use the same Box by two units. There is no problem in Base itself, but I thought that the set of exclusive use for mounting was also Set. I thought of what to do, but gold items made by us (Even though it can be bought at Home center) Did. I did not have anything, but I thought that it was still better if the gold utensils were also Set. View detail
Easy to use
Because it is used for YBR 125, I thought that the biggest hurdle to the extent that there was no sense of incompatibility, and as a result the capacity was set to 40 liters. Even though things are going in there somewhat, when inserting the full face again it is a little hard when inserting Rain jacket. Although it fits comfortably if properly tatami, it will be good if it should be a capacity of 45 liters because Rain jacket wants to be thrown in without being folded up because of its miscellaneous character (^ ^;
Usability is better than GIVI. There is no need to bother to insert Key every time you open and close, and you can lock it only when you want to watch out for a moment. It is easy to detach Box.
Personally there is no Brand consciousness like Box or something so price is high GIVIetc. I think that it is far better in COSPA than the Manufacturer in terms of practicality. it's recommended.
View detail
Box luxury feeling rises
Purchase SH-45 to feel unity with Motorcycle. BOX Body 10 K yen against Cover 4 K yen is only for appearance Whether individual value sense (Liking) It feels expensive though it depends. Purchasing lost GIVI E470 without painting 20K yen White 26K yen It is actually cheap for Cover cost 6K and 4K Shad is actually cheap, but Body is too cheap than that.
Body In the concave shape of the groove to fit this Cover on the outside of the ceiling, it felt like Design to complete with Cover.
Cover wants to paint exterior on a hard PVC white base, I feel it is pretty and beautiful.
(White color is slightly expensive so it may be different in other colors? I do not understand well)
There is something that seems like a pedestal inside the Body inside the installation (4 photos) , Drill with a drill of Φ 3 and stop with the attached Tapping screw. In the installation Instruction Manual, I instructed to cover Cover and hit Drill as it is, but since I do not want to get a hole in Cover, I opened a hole first with BOXSingle Body and worked, but there was no particular problem.
Instruction Manual is translated only in Europe 6 countries (Please do not enter here, but I think that is not particularly troubling.
* English Version is not E and GB - - It is not even UK - - Maybe I first saw the explanation of the Greece language - -
View detail
Fits: Others , Others , Others , Others
Parts to fix Base
Do not buy Base just got lost!
We will fix Base using this Kit.
If only Base is broken this Parts is unnecessary,
I thought that it would be unnecessary to sell it if it would be sold by Set if possible.
View detail
With this alone
It can not be installed with this product alone.
We also need Bracket and Bolt's Set to fix this Base.
I thought that I do not have to get lost if I sell it by Set anyway.
The item itself is satisfied well!
View detail
Attention required!
First of all, please replace the product image as soon as possible !!
The product currently on sale ProductNo YOMJ 15ST and YOMJ 14ST in the image are completely different things!
As you can see the posted image in detail, we are looking for things that can coexist with Tandem bar and arrive at Colle
It was kept waiting for about a month, I finally arrived and opened it and was amazed!
At first I thought that there was something wrong, but it seems that Manufacturer up-dated the goods themselves for some reason... I already decided to use it because I already have SHAD's Case on hand.
The commodity itself is exclusive for flowing water Fittingetc. There is no problem, I feel that the sense of unity with Case is very good including wearing.
When attaching the Base to the Carrier department, I think that there is no particular problem although it requires a little power work.
Coexistence with the Tandem bar is impossible, I think that it can be very appreciated that I try not to feel uncomfortable as much as possible, such as using Plate.
I urge people who are considering purchasing from now on to take the above into consideration.
View detail
How to install?
Translation to installation Instruction Manual (Please do not enter here,
I can understand somehow with illustrations.
However
Instruction Manual If you fix from the back with the attached Screw,
Screw Penetrating the Panel and I got ruined my ColorPanel.
In the first place fixing a thin ColorPanel with Screw from behind - - - ?
View detail
The inside also works as Small
First I thought SH26 would be sufficient and I started to use it, so I decided to say that again because of its convenience, so I tried capacity up. It is caused not only by the originally assumed Rain Wears and Body Cover but also by Inner and Over Pants that I took off, foods and souvenirs I bought.
● Body weight is Base - With Gold included 3. It is 9 kg. (Measured). Install Carrier (Manufactured by Endurance) Considering that the maximum Large loading capacity is 6 kg, including the influence on the balance and the cornering with the car case, I think that this Large fee is the limit.
● Comparative study was on SH 39. Design feels like it is modern today, against here it is rustic Square shape. Helmet selects here as if it is better to be square rather than round if considering ease of packing as secondary. After all the cheapness of actual sales (It became eligible for Sale in good condition) , It is convenient to look plain with a handle. The hand slid and dropped in SH 26.
● Base is Small TypeType (Included with SH 33, 29, 26) It is upwardly compatible with the Small Case and you can install it as it is (The opposite is of course impossible). I do not know if there is demand.
● There is space in Lens, you can afford it with a margin if it is about LED Tape. I tried it as a stop lamp for the time being.
Just to be sure, Reflector should be better, Emon's Reflective Protector (Quantity : 1 Set of 2pcs. ) I pasted it. Size is also exactly good, there is no cheapness like Reflective Tape feeling good. In addition, as insulation measures in the summer, I plan to paste insulation Seat inside.
● And every time, Bracket's position was troubled. The interval is as wide as possible, before and after Quantity : Pair (for Left and Right) Based on the condition that Base is not going too far back, the result of trial and error in the determined Screw hole is this. Attention also needs to be paid to Base distortion due to excessive tightening, and it is handled by Nut and Washer on hand. I pasted Black Film on the part where Bracket seemed to be visible from the outside.
View detail
I feel like I can go to Touring anytime!
It is a Rear box that I use for the first time, so I can not compare, but I have a take, I do not have to lock the keys one by one, and I feel like how to tighten the lid even if compared with other companies' things.
I do not know if it can be used for a long time, but I think that I will choose the same Manufacturer next time.
View detail
Fits: SUZUKI BURGMAN 200, SUZUKI BURGMAN UH200, SUZUKI BURGMAN UH125, SUZUKI BURGMAN 125R, SUZUKI BURGMAN 125
I am using it without problems
I think that we support Rear's Case in terms of weight tolerance. SHAD SH 40 RearCase is on board but there is no problem.
It is a place to drill a hole of 16 mm in diameter at Rear's Cover, but the position to determine the center of the hole is marked on the paper, but once you have installed the Carrier by yourself, screws are placed in any position of the Rear cover I think that it is better to open a hole after passing or fixing the position.
I drilled a hole as shown in the drawing, but it was slightly off by a few millimeters and I got a lot of sharp edges in the hole.
In the future, when you replace RearCase, it is limited to SHAD, but it will be inevitable.
View detail