Reviews
Fits: HONDA LITTLE CUB, HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB 50PRO, HONDA SUPER CUBC125, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, KAWASAKI Z125 PRO, HONDA CROSS CUB, HONDA PCX, HONDA PCX160, HONDA MSX125SF, HONDA MSX125, HONDA GROM
Just another small part that helps improves engine performance over the original part
About quality and texture - The hyper ignition coil from SP Takegawa is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - Just another small part that helps improves engine performance over the original part. The hyper ignition coil is worth the expense for the stronger engine feeling through the entire RPM range. Products to buy together - A key product to purchase when upgrading the ignition system is a spark plug cup to complete the hyper ignition coil installations as this part does not come complete ready for use. Difficulty of installation - The installation of the hyper ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the hyper ignition coil directly to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hyper ignition coil is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the hyper ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Purchased in conjunction with MONKEYLowdown
Purchased this product because I lowdown my MONKEY125.
The texture is great and the height is adjustable.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Experience the effect
It's very easy to install, but it works great.
The unstable handling that has always frustrated me.
Totally resolved!
The wide range of color variations will satisfy many people's tastes and preferences.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CT125CT110 HUNTER CUB
Worth the expense for the noticeable smoother and stronger pull through the RPM range
About quality and texture - The ignition coil from Kitaco is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The ignition coil is worth the expense for the noticeably smoother and stronger pull through the RPM range with the added bonus of an improved appearance against the red frame on the Monkey 125. Products to buy together - A key product to purchase when upgrading the ignition system is an iridium spark plug to complete the transition from original to performance system efficency of iridium technology. Difficulty of installation - The installation of the ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the ignition coil to th frame. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the ignition coil is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Rigidity is up!
The Front perimeter will look Snap.
The fluffiness was significantly reduced and operation felt easier.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB
Front feels lighter!
I changed it along with the Front Disc replacement.
The weight is light, but the front tire feels lighter than expected!
The price is reasonable, so if you are not sure, try to replace it.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L, HONDA MONKEY125, HONDA CT125
Main switch cover
It is always visible and easy to install and is a great first step for PetitCustom. View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT110 HUNTER CUB125, HONDA MONKEY125
Fits DAX125
It worked fine, no need to buy anything from Rose, everything is ready to go for Oil replacement. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
No wonder there are so many high ratings.
The sense of instability when the vehicle is tipped over on the Corner has been greatly improved.
Also, the front brake seemed to work better.
I'm satisfied
View detail
You don't have to go off-road to get the atmosphere.
I used it on a CT125. All you have to do is remove the Axle Shaft and replace it with the OEM Color on the Disc Side.
The body is fixed to the bracket first, but this part is Torx screwed, so it is difficult without a tool.
The wheel did not fit properly unless the Brake Pads were spread out, but the work was generally completed in about 20 minutes.
The back side has a reinforcing rib and seems to be strong, and there was no interference with the ponting.
I think it is also good that the price is Reasonable under 10,000.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125
I purchased this product because I have small hands and Brake lever puts a lot of pressure on my fingers when I grip it.
[How is it used?
I bought a CT110 HUNTER CUB this time, but my fingers hurt when I hold the RightBrake lever.
Maybe it's just me, but my middle finger is a little deformed after many years of use, so it inevitably causes pain when I use it.
So we decided to use this product made by Kanaya, which we have been replacing since the CB era.
Was the one you received as per Image?
Yes, it meets my expectations, it matches the color of my Motorcycle and looks great!
It was just like the plane.
Was the installation difficult?
The OEM lever is removed for installation, but the mounting bolt is not fully removed and the head is stuck in the accelerator wire.
It was difficult to pull it out because it got stuck. After that, once it was removed, it was just a matter of soaking it in, but it was a little difficult.
It took a while, but it was done!
How was your experience with it?
It is easy to use because the user only needs to adjust the position that fits his/her own medical needs with 6 levels of adjustment.
[Included Parts:were they on?
Included Parts:was only Lever, so I didn't have to buy aTouch separately like before, which was a big help!
[Was there anything that disappointed you?
I have no problem with the product itself, but it would look better if the mounting part was the same color.
Other items that would be helpful
If possible, lever should also be installed on the holder side (if it is greased up at the bolt).
I think it's a good idea... If you don't have BrakeGrease, you need to add it (apply it) ?Even if it's just a little bit of s
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The installation point may be a bit tricky to remove the mounting bolt, but you should be careful not to bend the Accelerator Wire part.
as a request
As I mentioned before, a little grease on the lever itself, or a small amount of tube attached to it, would be nice.
View detail
Fits: HONDA glom, HONDA SUPER CUBC125, HONDA DAX125, HONDA CT110 HUNTER CUB125, HONDA MONKEY125
Quantity:Save with the set!
I use it all the time.
This is the third time and no problems.
View detail
Fits: KAWASAKI ZZ-R1200, KAWASAKI ZXR750, KAWASAKI ZXR750R, YAMAHA NMAX125, YAMAHA CYGNUS X, YAMAHA BirdCity125, KAWASAKI ZEPHYR750, KAWASAKI Z125 PRO, KAWASAKI W650, KAWASAKI W400, KAWASAKI Ninja250, KAWASAKI KLX125, KAWASAKI GPZ400R, KAWASAKI GPZ900R, KAWASAKI GPX400R, KAWASAKI GPX250R2, KAWASAKI FX400R, KAWASAKI GPX250R, HONDA MONKEY, HONDA MONKEY125
I got a lot of iron powder.
I used it to clean up my new MONKEY125. It was my first and second DIY oil change, but it was done without any problem. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CROSS CUB 110, HONDA CROSS CUB 50, HONDA SUPER CUB C125
The difference is obvious.
I was considering SP Mukawa's Hollow Bolt, but after reading the impressions of this product, my heart was moved.
There was once a time when parts called Front Fork Stabilizer were popular.
Motorcycle front fork with upper and lower Three-Pronged Fork and Axle Shaft with Quantity:Pair (for Left and Right) are connected.
Quantity at the top of the bottom case between the bottom Three-Pronged Fork and the Axle Shaft, which is the longest distance.:Pair (for Left and Right) This is a Parts to increase the strength of the entire Front fork by connecting the
In the case of the CUB, the Three-Pronged Fork is only on the bottom, and the Front Fork is connected to the Three-Pronged Fork and the Axle Shaft in only two places, so it is obvious how much effect an increase in the strength of the Axle Shaft would have.
In addition, the precision of the product (i.e., as close to straight as possible) and the hard plating reduces rotational resistance.
Installation is simply a matter of replacing the OEMParts, so if you have the proper tools, it takes only 10 minutes.
From the moment the installation is complete and the Center Stand is lowered Ale?" I thought
The motorcycle moves forward as if it were on a downhill.
Clearly, the rotational resistance of the front wheels has been reduced.
The feeling of improved acceleration and fuel economy, or the feeling of sticking without Downshift on uphill roads, may be the Brush-bo effect.
While driving, the road surface conditions are now more palpable than before.
It may be that what was previously missed by Axle Shaft deflection is now being transmitted to Direct.
I like this feeling, but some may not like it.
Shaft1 pc is only 1000 yen for OEM parts and 3000 yen for SP Mukawa, while this is over 20,000 yen, and it is not a part that can be seen at a glance, so it is not considered by the dress-up crowd.
The high precision and finish of Parts can be seen just by holding it in one's hand.
I hate putting sticky Stickers on my car, but I was so impressed with how great this Axle Shaft is that I put the included Sticker on the Bottom case.
We recommend it to those who want to ride more comfortably and pursue the original Motorcycle riding style.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
DELTA Barrel4-S mini CT125CT110 HUNTER CUB JA65
The Torque at low speed immediately after starting and the extension at high rpm in 2nd and 3rd gears have been dramatically improved.
Mid-range speeds are as easy to handle as OEM
When the engine is put into 4th gear, the torque is a little thicker than the OEM Exhaust System.
Overall, the Torque is slightly increased and the high rpm is extended.
I don't think there is any increase in maximum speed.
The volume is quiet when idling, and when turning it up, the sound of the Exhaust System is heard, but personally, the volume is just right.
The sound quality is not a heavy bass sound, but a crisp Parisian sound typical of single cylinder engines.
I had installed Barrel4 on other cars in the past, but I felt that the sound of Barrel4 was very solid!
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Bracket painted ….
InstallationInstruction Manual is difficult to understand, but it is easy to understandQuantity:Pair (for Left and Right) Be careful not to make the mistake of
The painting of the mounting Bracket is Quantity:Pair (for Left and Right) I was also bald. Rather than sayQuantity:Pair (for Left and Right) I think it might have been better to say "I was able to turn it over. It's a pity.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB
Solid around Front.
No more wobbling when stopping or Start at low speeds. View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA glom, HONDA CBR250RR, HONDA CBR600RR, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA DIO110, HONDA CT125CT110 HUNTER CUB
Reliable K-PIT
Repair Parts at KPIT for your peace of mind.
Purchased to replace Rotor.
View detail