Reviews
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90 CM, HONDA SUPER CUB 90 DX, HONDA SUPER CUB 90 STD, HONDA SUPER CUB70 CM, HONDA SUPER CUB70 DX, HONDA SUPER CUB70 STD, HONDA CUB PRESS, HONDA SUPER CUB 50 CM, HONDA SUPER CUB 50 DX, HONDA SUPER CUB 50 STD
It will improve the ride and appearance.
[How is it used?
SUPER CUB I got used and cheap.
The SUPER CUB that we purchased was inexpensive, and the exterior of the SUPER CUB was sadly deteriorating over time...
A reliable Shop for such SUPER CUB Refresh! Tokyo Do. This time, we refresh the Rear shock, which had been in a soggy Rust condition.
The distributor is Tokyo-Do, but the manufacturer is YSS, which has become a MAJOR suspension manufacturer in Japan.
How was your experience with it?
The vehicle we acquired was a wrecked vehicle with a lot of mileage, so it was a simple matter to get a new one. Compare with OEM Product." The body of the car was squishy, but the movement of the body was crisp.
The included adjustment tool allows for 5 levels of pre-road adjustment, but in my case, the lowest factory setting was sufficient (I think the lowest setting is a little stiffer than OEMRear shock).
Another good point is that since the entire product is made of plating, it can be installed without any discomfort regardless of the color of the car body.
How did it compare to other products?
Several companies sell shocks in the same price range, but since this is the first time I have replaced the rear shock of my SUPER CUB with an Other Brand Product, I am not familiar with the MeritDemerit of each.
I wonder if there is no problem in coordinating with the car body color. I think so.
If you are interested in the behavior of the car when you drive on the circuit or push it to the limit, you may be more satisfied with the more expensive Rear shock.
[Points to note]
Not so much as a precaution, but to ensure safety during installation, to grease up moving parts, and to install with the proper torque, etc.?
This product is Ironware. The product is a plated product, so it can be enjoyed in a beautiful condition for a long time if you continue to take measures against rust, such as wax & coating, dehydration after driving in the rain or washing the car, etc.
Other items that would be helpful
The deciding factor in the purchase
A friend of mine who is a CUB friend was using this product (BodyPlating/SpringBlack) and gave it to me for a test ride because it looked good.
[How is it used?
I'm a city rider Main, and I'd like to take a slow touring to the north Large land by CUB someday, but it would be tiring........
【Included Parts:presence or absence】.
Rear shock absorberQuantity:Pair (for Left and Right) and a tool for pre-road adjustment are included in the package.
Also included was a YSS Decal and a brief instruction manual?
[ITEMS TO BUY TOGETHER
If you have a budget to spare, you can also use the Tokyo-Do handled Front Reinforced Sport Shock Original YSS and refresh both the front and rear for a more stable driving experience.
The Front is hidden and barely visible from the outside, but it is performance oriented.
Opinions and requests to Manufacturer.
The price is relatively affordable, and the product is easy to understand as a first step in Custom & Restore, so please continue the lineup.
View detail
Fits: HONDA CL50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA VOCAL, HONDA CRF70F, HONDA BENLY50CD90, HONDA BENLY50CD70K, HONDA BENLY50CD50SP, HONDA SUPER CUB 90, HONDA SUPER CUB 50DELUXE, HONDA SUPER CUB 50Standard, HONDA SUPER CUB 50Super custom, HONDA SUPER CUB 50ST, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50, HONDA GIORCUB, HONDA JAZZ, HONDA Z50R, HONDA XR50R
Startability improvement is felt.
Used on two wheels called YamahaMATE (T90D).
The starting performance of this two-wheeled vehicle was nowhere near as good as it should be, and overhauling the carburetor did not change this (setting is naturally fuel-efficiency oriented).
This was even more so since it was compared to CUBC90, but it took about 2 KICKs to get the Engine to hang.
I am very happy to see that MATE's ENGINE has changed, where 10 to 20 KICKs were the norm after the first missed start.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50
Very nice
I installed this on my 69' CT90 that has a Lifan 125cc in it. The build quality is amazing. Its nice that it goes under the foot pegs as this solved a lot of issues the Lifan engine swap made. The sound of this exhaust without the baffle is glorious. It makes the little Cub sound like a large motocross bike and it just puts out this deep rumble of a roar. Not great for city riding but in the country its just amazing to let it sing down a dirt road. With the baffle its still louder than stock but reminds me a lot of what my XR100/CRF100 sounds like. Has a normal bike tone about it. But this is by far the best bike exhaust I've ever bought. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
For MONKEYBore up
I think it's a good product
Always clean the chain with Oil before installation!
A considerable amount of iron dust waste is produced.
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Formative Lantern CUB
The work is difficult! Special tools are required. If you don't have it, you can't do it! First, you need to remove the front wheel, then the front cushion, and then use a special tool called a spring compressor. I recommend the Straight Coil Spring Compressor for Motorcycle, which can be used on an AXIS light truck and an NVAN. I received this compressor as a prize from a magazine. I have been using it for more than 10 years. I have been using the NTB product Moldy gave me for 1000 yen before, but this time I had a chance to use this product. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
การสั่งซื้อสะดวก รวดเร็ว ถ้าสินค้ามีสต็อกที่ไทยครับ สินค้าตรงตามที่ระบุไว้ทุกอย่าง ไว้จะใช้บริการอีกครับ View detail
Fits: HONDA Rebel 250, SUZUKI Choinori, HONDA CD250U, HONDA CRF50F, HONDA CRF70F, HONDA XR50R, HONDA XR50 MOTARD, HONDA XR70R, HONDA Z50R, HONDA APE, HONDA APE, HONDA APE, HONDA GORILLA, HONDA JAZZ, HONDA GIORCUB, HONDA SPACY100, HONDA SUPER CUB70, HONDA SUPER CUB70Super deluxe, HONDA SUPER CUB 90, HONDA SUPER CUB 90Super deluxe
Formative Lantern CUB
Changed from high quality plug to Standard Plug BP5HA I can't see much change in the expensive product and it seems to be covered with black. View detail
Fits: HONDA Super Cub MD, HONDA Super Cub Pro, HONDA solo, HONDA MD90 (Postal CUB), HONDA MD70 (Postal CUB), HONDA CL50, HONDA MD50 (Postal CUB), HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110
New, good.
Used for a Lantern CUB of a memento. The suspension has been changed from 17in. to 14inch of LITTLE CUB. I wanted to wear 17in. TRTire, and if I had held out for another year or so, I could have had 17in. TRTire!!!! I was very sad and heavy! I bought the wheel used and I don't remember replacing it, so I proceeded to work on it this time because I was free from work. I will report back if there is any change after that! View detail
Fits: HONDA CL50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA VOCAL, HONDA CRF70F, HONDA BENLY50CD90, HONDA BENLY50CD70K, HONDA BENLY50CD50SP, HONDA SUPER CUB 90, HONDA SUPER CUB 50DELUXE, HONDA SUPER CUB 50Standard, HONDA SUPER CUB 50Super custom, HONDA SUPER CUB 50ST, HONDA SUPER CUB 50DX, HONDA SUPER CUB 50, HONDA GIORCUB, HONDA JAZZ, HONDA Z50R, HONDA XR50R
I'm satisfied
I had been interested in MOTO DX for some time, but had not been able to try it on my ZRX1100 because it was not available. I have just purchased a new Z125PRO, and although there was nothing wrong with the original Plug, I decided to give MOTO DX a try right away.
The replacement work is not particularly difficult, since all you have to do is to replace the plug. In fact, the Z125PRO can be accessed immediately, and since there is only one plug, it was one of the easier ones. However, it is not difficult, but if you twist off the plug by over-tightening, you will be in trouble, so be careful if you do it by yourself. I did it before with a ZRX1100, and it was a chilling experience. Fortunately, I was able to remove part of the twisted off plug using the Extractor, but I almost had to reverse the upper part of the engine. When tightening the plug, it is necessary to check the tightening torque carefully and close it with a torque wrench, or if you tighten it by hand, you need to tighten it more or less.
I quickly replaced the plug, put the plug cap back on, and did a test run. First of all, I felt that the car started up clearly better, and when I started driving, I felt that the acceleration was a little stronger. I do not yet know the effect on fuel consumption or durability, but I hope that the durability will be as good as the manufacturer claims. In general, I believe that the replacement has had a positive effect.
MOTO DX is more expensive than most plugs, but I found it to be a reasonably effective product. However, for a single-cylinder vehicle like the Z125PRO that only needs one, the price was right for a trial run because the hurdle is lower.
It is a good product that I would recommend without omission to my friends who drive vehicles with the settings.
View detail
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB, HONDA C50LM LITTLE CUB, HONDA C70 SUPER CUB70
I should have changed it earlier!
It is a notorious OEMChain, but we had no problems with it, so it has been replaced from new without replacement.
This time, the tires were exchanged for the new ones.
It is strange that the weight has increased but the resistance of the power seems to have decreased.
Non-seal Chain should have less resistance, but deterioration is a terrible thing.
I expected this after the installation of the Chain, but the sound of the Chain's operation became nonexistent.
It has been well lubricated and has not been particularly noisy, but its presence has disappeared.
I have a sense that the Chain is responding to Throttle more quickly than before, as if it is working smoothly in situations where the Chain is under load, such as when re-opening Throttle.
It's new, so that's no surprise, but I'm looking forward to seeing how it feels when the break-in period is over.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
KITACOGasket
I used it to replace the exhaust system on my ADV150 and it worked fine with no exhaust leaks.
There are no particular difficulties in installation.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To replace Exhaust System
2Quantity:The set is reasonably priced, and KITACO offers peace of mind. View detail
Fits: HONDA glom, HONDA glom, HONDA glom, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MAGNA 50, HONDA MOTRA, HONDA BENLY90S, HONDA BENLY SS50, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA CUB press 50, HONDA BENLY50S, HONDA CT110 HUNTER CUBCT50, HONDA DREAM50, HONDA DREAM125, HONDA DAX70, HONDA DREAM50
Gold chain
Chain was replaced along with Front and Rear Sprocket replacement.
I decided on this product because of its looks and price, and it is one of my favorites.
I ran after the replacement, and the gear changing became Smooth and easy to run.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Genuine Kitaco Exhaust Gaskets for SUPER CUB 50
These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
1pc. is Smaller
The first one was a little smaller than the second one, so the Quantity:Set and it's falling down.
The other one was a good Just fit.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
ExactSize to Seat
I purchased a Mesh Seat cover to keep my Seat from getting too hot.
Seat size is EXACTLY the same!
I don't know if it depends on the fabric of the pants, but when I put on the braces, my buttocks slide forward.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
STD Size
Motorcycle I bought used, originally came with 15T but I changed it back to STD Size 14T.
The Rear sprocket and Chain were replaced at the same time as the FrontSprocket, making it much easier to drive.
View detail
Fits: HONDA giorcub (GIORCUB), HONDA Little Cub, HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA LITTLE CUB (LITTLE CUB), HONDA Little Cub 55th Anniversary Special/Little Cub Special (LITTLE CUB 55th Anniversary/LITTLE CUBSPECIAL Knife), HONDA LITTLE CUB SP (LITTLE CUB), HONDA LITTLE CUB SP (LITTLE CUB)
That's enough
I used it on a CUB that I purchased used.
After purchasing the engine, the engine was not bad, but when I removed the air cleaner, I found the lower half of the engine was covered in Oil.
After replacing it with this one, both acceleration and fuel economy have improved.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
530-1010216
Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail