Reviews
Genuine GBRacing Pulse Cover For Kawasaki Z900 2018
The final part of the protection job for the Kawasaki Z900 2018, this last part is the pulse cover. There are some pretty important parts behind the standard pulse cover so this is a must to finish off the protection job. Although it is a small piece, it does an important job. Even though I have the generator cover and the clutch cover, I had to get this one too to make the bike look complete. I cross referenced the part numbers with GBRacing website to make sure I had the right one for the Kawasaki Z900 2018. The cost that Webike sell for is really good and around the same as I could source locally. I could not tell you for sure what exactly the composite of these covers is but they have fibre and plastic from what I have read. GBRacing have made a composite of the materials to be durable, long lasting and take a good beating if they need to and yet, still protect the bike. They also look really cool. When I got the packages, the pulse cover looks amazing. The finish is a smooth satin black with some great detail in the logo and lettering looks really cool. Install took around an hour for all 3 covers so not a hard job and anyone can do it. Just remove the bolts stated in the instructions and replace with the ones proveided in the packet. Super simple. End result is awesome. Very pleased with how it all looks and now I do not have to worry about damaging anything. Thank you Webike, great help. View detail
Fits: KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled), KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z750R, KAWASAKI Z250SL, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Work
I installed it on a 2021 RC390, but the bolt that came with it did not have the correct pitch, so I used a bolt sold at a local home center.
We purchased this item because we just had the Orange color in stock.
After using it for a while, the color faded due to ultraviolet rays? After using it for a while, the color faded due to UV rays.
I didn't have any problems using it on Jack-up, but if you are concerned about how it looks or when it is left mounted on the car body, you may need to take some measures to prevent it from looking bad.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Genuine R&G Radiator Guard for Yamaha YZF-R1 2014
With most bikes, radiator guards are not a standard accessory which is strange as these need a decent radiator guard in place. No matter, this customer wanted the radiator guard along with the some other protection for their bike. Unfortunately, Webike did stock the radiator guard in black. Brilliant. The guard was good value from Webike and around the same as i could source locally, unfortunately at the time, my supplier was out of stock and had a lead time of a month. With othert items I had in my basket, the cost of shipping all the parts was really good value. Shipped by EMS and arrived in 5 days. The guard was well packaged and protected very well. All the paint on the guard was lovely, a deep satin black, this attached via bolts two bolts on the left and two bolts on the right side so very secure. I have used R&G radiator guards before so know they do last and really do protect. All the accessories were included to fit this guard. Once fitted, which took about 15 minutes, looked really professional and clean. Very pleased with purchase. View detail
Fits: APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA RSV4 RF, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA Tuono V4 R APRC, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA TUONO V4 1100 Factory, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4, APRILIA RSV4
Genuine R&G Swingarm Cotton Reels for RSV4 2016
These were purchased to add a little protection and also to utilise a paddock stand for maintenance on the Aprilia RSV4 2017 model. The part was pretty easy to find with using the R&G website. Webike price was really good and with a few other parts in my order, all was shipped and delivered by EMS in 5 days. All was packaged really well and no damage. These are super nice spools for the bike, they are fairly chunky but this means you will not have an issue with slippage like you get with some of the small spools. I have had previous experience with these in the even tof a crash, they relly do protect the spindle to the rear wheel. They are made from a plastic mix but I am unsure of exactly what. The spools themselves look great when fited and the R&G logo printed on the sides is a nice touch. Really clean and machined good. You even get a set of new bolts that are stainless steel I believe. Very pleased withe the purchase. Thanks Webike. View detail
Fits: APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA Caponord 1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA DORSODURO1200, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA Factory, APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia), APRILIA RS125 (Aprilia)
Genuine R&G Visor Pouch
I used to have one of these until about a year ago and lost it somewhere. Now with the nice weather it was time to get replacement. Pleasantly surpised that Webike actually stock these. I know they are nothing new but they allow you to keep a spare clear visor so you can swap out whrn the light gets lower. Or, if you want to just keep a few in reserve. Really nice product and well made. All the stitching is good and no pieces hanging off or coming away. I have tried the Arai RX7V Evo visor, Shark Spartan and both these fit perfectly. No bad feedback. Does the job and pleased with it. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
R&G Mirror Blanks for Honda CBR1000RR 2016
Let's be honest, no one really likes the stock mirrors that come on most manufacturers these days, and for this reason a set of mirror blanking plates were purchased for the 2016 Honda CBR1000RR. This part was found using the reference on R&G website, this set does fit a few models of the CBR and Webike stocked them no problem. With some other parts shipped by EMS and arrived in 5 days. All arrived in perfect condition. The blanking plates are really cool, they have a nice R&G logo and are made from what looks like an aluminium metal. The finish on them is superb, the paint looks smooth and no sign of any flaws that I can see. The printed logo is crisp and clean. Comes with their own blots so no need to worry about losing the ones from the stock mirrors. Fitted really well and look pretty awesome. I already have some small bar end mirrors installed so can still see what is coming from behind. Overall, very pleased with the purchase. Keep it up Webike, thanks. View detail
Genuine R&G Crash Protectors for Yamaha MT07 2017
This was the second part of adding some protection to the MT07 2017 model. I already have the radiator guard from R&G and was very pleased with how it functioned and looked. I was happy that Webike do stock a lot of R&G products for various models and manufacturers. I found the correct part by cross referencing R&G website. The price was about the same as I could get locally but they did not have the stock, Webike did. With a few other parts, all shipped by EMS and arrived undamaged in 5 days. These crash protectors are a sturdy piece of kit. You can see that there is a lot of material to wear away before any damage can be made to your engine or surrounding parts. I personally have had a small low side and the crah protector did their job perfectly. Wirth these added, this is what we are hoping for too. The machining is brilliant, very well presented. The bolts they provide which are of course longer than you remove are stainless steel so will be just fine. A word of warning if you do not already know. Just remove one side at a time or you risk the engine dropping and then you might come into difficulty. If all else fails, I do tend to have a jack under the rngine before I remove or even loosen any bolts for these items. Take your time, make sure you do not cross thread the bolts and you will be just fine. Torque to instructions and off you go. Thanks Webike, very happy. View detail
Fits: YAMAHA XSR700, YAMAHA MT-07, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
R&G Radiator Cover for Yamaha MT07 2017
As with most bikes, radiator guards are not a standard accessory which is strange as these need a decent radiator guard in place. No matter, this customer wanted the radiator guard along with the some other protection for their bike. Unfortunately, Webike did stock the radiator guard in black. Brilliant. The guard was good value from Webike and around the same as i could source locally, unfortunately at the time, my supplier was out of stock and had a lead time of a month. With othert items I had in my basket, the cost of shipping all the parts was really good value. Shipped by EMS and arrived in 5 days. The guard was well packaged and protected very well. All the paint on the guard was lovely, a deep satin black, this attached via bolts two bolts on the left and two bolts on the right side so very secure. I have used R&G radiator guards before so know they do last and really do protect. All the accessories were included to fit this guard. Once fitted, which took about 15 minutes, looked really professional and clean. Very pleased with purchase. View detail
Fits: APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, APRILIA Shiver 750, MOTOGUZZI Griso (All Years), MOTOGUZZI 1200SPORT, DUCATI MONSTER S4Rs testastretta
Genuine R&G Bar End Sliders for Aprilia Shiver SL750 ABS 2013
A friend wanted to add some bar end sliders to their bike and I suggested R&G as they have a really good history of producing great protection items. The part was already found and searched Webike and was surprised to see they actually stocked these. Happy days. With a few other parts in my basket, all was ordered together to help with shipping costs. My order was shipped with EMS and delivered in 5 dyas to my door. The parts in my order were all in 100% perfect codition as Webike pack everything very well. These bar end sliders are a really cool piece of kit that do help in case you have an accident. They really do protect your bars and in turn your hands too. The finish on these is a brushed steel with thick black plastic ends to help with the slide function. The bolts they came with are super clean, the threads are perfect and I'm sure they are stainless steel bolts anyway. The brushed steel finish is free from any blemishes and does accent the colours already on the bike. Very happy with this purchase, thank you Webike. View detail
Genuine R&G Tail Tidy for Kawasaki Versys 650 2018
I have previously purchased a lot of R&G tail tidy's over the years and have only good things to say about them. They look superb and fit great. This was a replacement for the stock OEM Kawasaki one that was fitted from the bike being new. No one likes the big tail tidy on that so a lot change them out. I decided to stick with what I know and went for this one by the great brand, R&G. Along with a few other parts, this was shipped with EMS and arrived in 5 days. All the items were well packed and no damage at all during transit. This tail tidy comes with all the fitting you would need and the bolts too.You can see the quality and the tactile finish on it is awesome. The instructions are clear and precise and if you follow them right, you will have no issues at all. Once installed, the rear of the bike looks a whole lot neater. Great product from a great company and handled by Webike, you're the best. View detail
Fender extender
This fender extender is good for rainy season. Installation is a bit tricky as you need to do minor adjustment. Don't rely on the double sided tape provided. Drill 4mm holes and use the studs provided. View detail
Fits: DUCATI 959Panigale, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1199Panigale
Purchased for StreetFighterV2.
Purchased for Street Fighter V2 from the Parts List after confirming compatibility.
The ground surface of the STAND is small, so there is some concern about hanging the STAND on soft ground.
Clearance with Under Cowl was no problem, and it was easier to STAND.
It is not cheap, but if you feel Merit in increasing the ground surface of STAND, you may purchase it.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
demon who obstructs sentient beings from maintaining moral behaviour
The ground penetration was reduced, but not as effective as the price, and eventually they got in the way and were removed after a year or so. View detail
Fits: BMW R nineT, BMW R nineT, BMW R nineT, BMW R nineT
Refreshing around the Rear!
The work is not difficult.
Plate assembly under the seat is a little difficult to tighten.
We are satisfied with the design, which highlights the big-bonedness of R nineT!
I think it is total and cost effective.
View detail
Fits: HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F, HONDA CB500F
Engine Case Slider for Honda CB500F 2015
A friends bike came in with some scuffs to the casing and not to get a new casing they decided they wanted to cover the small scuff with one of the R&G engine sliders. To be honest, You would not be able to see it once this is fitted. It also adds a little bit of protection to the CBF. I have used R&G many time for protection before and have had really good results even after them getting into some gravel. I found the correct part from R&G website and then searched Webike for the corresponding parts. Good fortune, Webike do have quite a lot of R&G items in stock. Added to my basket. This were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. From Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Webike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively small, they are already boxed in their own R&G packaging anyway. Webike packaged all the items thoroughly, thumbs up for that one. The case slider arrived in perfect 100% condition as you would expect. All the manufacturing from R&G is exceptional. They really do know how to make protection parts and make these to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. R&G, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other orders. View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
R&G Fender Eliminator for Yamaha R1 2013
As with most manufacturers, they put massive fender eliminators on their bikes from factory. Come on, no one wants a long part hanging off the back of their bike like that. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one. Never used a fender eliminator from R&G before so this was new territory for me. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Genuine R&G Cotton Reels for 09 Fireblade
There were a couple of other parts that I wanted to get for project track bike which will help protect the bike if there is any accident. These are what I decided to get and the added bonus is that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant.I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead.The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work. View detail
Fits: YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA MT-07, YAMAHA XSR700
Genuine R&G Aero Crash Protectors for Yamaha MT-07
There were a couple of other parts that I needed for my customers. One of the asked for good protection for their MT07 so I recommended R&G. I did look at other brands but for the price and what I have witnessed from R&G before, we went for these. The part numbers for the MT07 do only fit a couple of sub models but essentially the MT07. I got the correct part number from R&G anyway. The cost was reasonable so this was also a great benefit. The shipping courier I went for was EMS fast service. They delivery my orders within 5 days and I have never had it take any longer than that. From Japan to the UK, that's just brilliant. The shipping was also spread out over a few items which meant it was great value. Upon receipt of my order, the outer box was sealed with tape and nothing could escape during transit, not even the gaskets which are flat could be lost. All the item in the box were packed very well and bubble wrap was also added for additional security. Everything was 100% perfect. The material of these crash protectors I am not sure of but they really do scrub off the speed off if you have an accident. The aero shape is really retro looking which fits really nicely with the MT07 style. These Aero crash protectors are pretty easy to fit but just do one side at a time and get some support for the engine as when you remove each bolt, there is a small risk that the emgine will also move. Yes, I have mad ethis error myself so do not do the same. ALways take precautions beforehand. If you do not add some support to the engine and it does drop slightly, you will either never get the bolts to grip or you will just strip the threads and possibly mess up the female threads on the engine. Take your time and follow the instructions R&G provide. Saying that, they do not suggest supporting the engine but I always do now. One happy customer, thanks Webike. View detail
Fits: SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI GSX-1250 FA, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1250GT, SUZUKI BANDIT1200
Area0 Height0 Screw×.
In terms of extending the height and area of the Side Stand, it is a very satisfactory product.
However, the included screw is too short and loosens after continued use. Screw locker is recommended.
View detail
Fits: BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RT, BMW R1200RS, BMW R1200RS, BMW R1200RS, BMW R1200S, BMW F800S, BMW F800ST
Genuine R&G bar ends
These were for a project I have been meaning to finish for a while now. The bars I have on the bike need some decent bar ends and R&G are the place to go for these kind of thing. I was pretty surprised to find that Webike actually stocked these. I found the correct part by using the parts catalou=gue from R&G website and cross referenced with Webike. Super easy really. The price Webike were selling these for are really good value and around the same as can be sourced locally. I always have more parts in my basket ready to place my order. This is because I found that buying multiple items, cuts down on the shipping costs by quite a bit. The courier I use now is EMS fast as they get my parts to me fast, roughly around 4-5 days and this time, it was 5 days total. My order was all packed in a sturdy box and Webike tape all the way around so it is fully sealed. This stops any ingress or egress. Everything arrived in perfect condition and no damage or missing parts were found. These bar ends are a really good piece of kit for your bike. The provide really good protection in case you drop your bike, that the bars do not get scratched up. They also have a weighted part which helps with vibration. The black part is a robust special nylon material that I know does stop mishaps if you do drop the bike or come off. If the bar ends hit the floor then this generally measn, your frame and some other parts do not. I found out recently that you can also buy replacement nylon ends which is a great idea. The silver section is a nice satin brushed finish. They really do add a bit of subtle bling to the bike but this was not my aim, I just wanted something that did what it should, These are what I needed. Very happy with purchase. Thank you Webike for the great service you provide. View detail