Reviews
I think the previous Yoshimura logo was a better parenthesis.
[How is it used?
I thought Yoshimura cyclone was Cool in Compact.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It was easy with Bolt On.
How was your experience with it?
I was surprised that the volume was louder than I expected.
[Included Parts:were they on?
Bracketetetc. included.
[Was there anything that disappointed you?
I thought the sound was too loud and the previous Plate with Yoshimura logo was definitely cooler.
View detail
Fits: SUZUKI KATANA, SUZUKI Hayabusa, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Perfectly Self-SufficientParts
This is a SimpleParts product that simply removes the OEM master cylinder cap and replaces it with this product as-is.
When replacing the Master Cylinder, adjust the Handlebar to a position where the Master Cylinder can be kept as horizontal as possible.
Remove the mounting screws with a Phillips Screwdriver and install with a Hexagonal Wrench.
The system is good, Anodized is clean and always in sight. YOSHIMURA It is fun to have the Logo of the "Logo", but on the other hand, it is just that, Parts.
In a sense, it is like a representative of the ultimate self-indulgent parts.
The price is a little high, so how about when you have extra income?
View detail
Fits: Others Vehicles with 12V Battery/6VBattery, Battery reply vehicles
Old Type, but easy to read!
[How is it used?
As the number of electrical components and engine tuning increased, oil temperature control became necessary, which led us to this temp meter with BoltMeter function.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Wiring is a lot, and I think Large is odd if you are unfamiliar with it.
How was your experience with it?
It is very easy to read, and the necessary information is available on one screen, which is good.
I have been using it without any breakage or glitches.
[Included Parts:were they on?
Power Supply Cable is included, but Sensor must be purchased separately.
[Was there anything that disappointed you?
I am worried that we will not be able to keep up with repair parts if models are changed frequently, even though we have a wide variety of models.
YOSHIMURA is indeed YOSHIMURA. You can monitor the condition of your car with performance and durability beyond your expectation.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, SUZUKI GSX-S1000, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-4R SE, SUZUKI GSX-S1000GT, KAWASAKI Z650RS, KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000R, YAMAHA YZF-R1M, SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F
Pinpoint.
I replaced it because it was in plain sight when I boarded the train.
It raises my spirits.
View detail
Anodized shades are good.
Color Anodized Aluminum shades were good.
However, the installation cannot be done without an M24 Wrench, which I purchased separately.
Maybe it would be cheaper to install it at a nearby Motorcycle shop for less labor.
View detail
I installed it for a Circuit run.
Unlike conventional stoppers, this type is designed to catch on the outer surface of the front fork. Of course, the angle of cut is much more limited.
The Left Side is Large and sturdy, but the Right Side Harness is slightly obstructive. I don't mind it when I put it on, though. I don't know how it will feel when it falls down?
View detail
Fits: HONDA CT125
Exhaust System
The sound is low and austere, I like it. View detail
Fits: HONDA FORZA, HONDA Forza350
YOSHIMURA Exhaust System for MF15
I have been looking forward to the release of this product for MF15FORZA for a long time.
I purchased YOSHIMURA's Exhaust System.
The price was also about 10,000 less than other stores.
Installation was not so difficult.
Gasket is not fixed to Gap or Flange when inserted.
There may be a HANG to it.
The Rubber Band, which comes with the product from the beginning, can be used to fix the Flange.
It is easy to work with.
Be careful not to forget to remove the Rubber Band after installation;
The sound is a bit more "Large" than I imagined.
I am satisfied with the very good sound typical of YOSHIMURA.
I'm glad I bought it
View detail
Simple leather Key Holder
As a motorcycle key holder, it is neither small nor large in size.
However, I think it is difficult to put the Motorcycle key in the Ring.
The leather part is black, and the YOSHIMURA name doesn't stand out much, which is a pity.
But I think it is a good Key Holder with Simple construction.
View detail
Normal Back
It is cool with Logo with YOSHIMURA, but it is normal as a Back.
The fabric is quite thin and does not hold that much.
If you want to carry it only for a short time or just in case, the light weight is fine.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
With Cowl is difficult to do.
I'm happy because it reduces some of my anxiety, though nothing is absolute.
It is not labeled for GSX-S1000GT, but I was able to install it successfully. However, it is difficult to install with Cowl. It's too bad it's so expensive.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSF750, SUZUKI GS1200SS, SUZUKI BANDIT1200, SUZUKI B-KING, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI GSX400, SUZUKI GSX400
CB1100 with Adapter in use.
It is a little expensive, but since we use a temp meter made by YOSHIMURA, which is a Status, a little is unavoidable.
I am using it on my CB1100, but instead of using an oil drain bolt, I am using a MaleM20?PT1.0 and FemaleM16?PT1.5 adapter on the blind lid at the bottom of the engine.
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SB, HONDA CB400SF
Mounted on cb400sb NC42
The sound was a bit drier than OEM.
It is not noisy and does not get stuck in the car.
I think it is the Exhaust System of a rather Large person.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
YOSHIMURA for SEA BASS
It is not the kind of motorcycle that revs up that much, but the YOSHIMURASound at high rpm is very comfortable.
Reasonably high price, but no loss on installation.
No contact with OEMSide case, of course.
However, the installation is troublesome because the Center Stand is involved.
View detail
just right (time)
I found the Size to be just right for me without being Large.
It is the perfect product for a casual one point.
View detail
Air-cooled Motorcycle is all about Oil!
Purchased for the purpose of Oil management guidelines.
PRO-GRESS1" When PRO-GRESS2" I was not sure if I needed the clock function or not, but I preferred the compact one.
It was good, so I decided to go with PRO-GRESS1 here.
Installation is not difficult as it only requires Sensor and power supply.
I think it is necessary. The LCD screen is bright and the text is large, so it is very easy to read, even in daylight.
Since it can be switched to voltage display with the Button, I thought it would be useful for finding Trouble in the electrical system.
My ZEPHYR is 25 years old...
View detail
Fits: SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI RAIDER R150, SUZUKI GSX-R125, SUZUKI GSX-S125
I had a hard time installing it.
Since this is YOSHIMURA, there are no problems regarding installation accuracy.
Just install theQuantity:Pair (for Left and Right) The Cowl of the Bolt must be removed and the Rubber Bush of the Bolt stop must be removed.
If the Rubber Bush is hardened, etc., or if you have trouble removing it cleanly, you can use the Quantity:Pair (for Left and Right) Bush at the same time.
You may want to purchase it.
View detail
I have no Drill to complain about, but...
The part of the Body where the Wiring comes out is exposed.
Colorful Wiring is in full view. Very disappointing.
It would be nice to be able to display voltage and one temperature, but it would be better if I could see two temperatures at the same time. I wish they would make the voltage a switchable display.
I like the Design very much and it looks good day and night.
It would have been an expensive purchase if Sensor had been included.
View detail
Fits: YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA XV250S VIRAGO 250cc All, YAMAHA FZR250 GENESIS 250cc All, YAMAHA BW350 348cc All, YAMAHA BT1100 BULLDOG 1063cc All
Reliable K&N products
Reliable K&N products
With YOSHIMURA's Original sticker
This is my third repeater.
I don't really have a feel for the performance.
The trust of the Brand and the fact that YOSHIMURA is carrying it.
Of course, the air filter is also made by the company.
View detail
Moderately good.
I bought it because of the cosmetic price, and it is moderately good. It is made so that a little bit of rain will not be a problem. View detail