Reviews
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL500, HONDA REBEL250, HONDA MONKEY125, HONDA X-11., HONDA XL230, HONDA Xelvis (XELVIS), HONDA X4, HONDA V - TWIN MAGNA S (TWIN MAGNA), HONDA V-TWIN MAGNA (TWIN MAGNA), HONDA VTR-F, HONDA VTR Type LD, HONDA VTR, HONDA VT750S, HONDA VT400S, HONDA VT250 SPADA (VT250 SPADA), HONDA VRX Roadster (R100 ROADSTER), HONDA VFR <ABS> and SPECIAL
RCH-01
The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Maximum speed has increased ?
Conversion to 520 Chain (and Sprocket), speed was up in almost all areas at the same RPM as before?Chain lightening was more effective than poor modifications. View detail
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Fits: HONDA 250T, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SRV250, YAMAHA SR250, YAMAHA RZ350, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA MT-03 (-2009), YAMAHA FZ400R, YAMAHA DT250, YAMAHA FZ400, YAMAHA DT200WR, YAMAHA DT200R, YAMAHA BW200, YAMAHA BW200, SUZUKI MARAUDER250 (GZ250), SUZUKI VOLTY, SUZUKI BANDIT250
Smooth running
I bought this for my YZF-R25 and brought it in to Motorcycle shop to have it replaced. I had used it before, so regular maintenance will extend its durability. The ride feels smooth. The color is a nice, calm gold, and I think it's a good color. View detail
Fits: KAWASAKI KLX650SR, HONDA FTR250, HONDA CRM125, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI DR200, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, DUCATI MONSTER400 ie DARK, DUCATI MONSTER400 ie, DUCATI MONSTER400 DARK, DUCATI MONSTER400
D.I.D 520VX3
The product is 100% original, although delivery took more than I should've opt for FedEx. Cant wait to install it on my bike! View detail
Fits: KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, MEGELLI Megelli 250R, KTM RC390, KTM 600 LC4, KTM 600 INCAS, KTM 600 GS 4T, KTM 600 ER, KTM 390 DUKE, BMW G310 R, BMW G310 GS, BMW G310 GS, MV AGUSTA F4-BRUTALE 675, APRILIA WIND, APRILIA PEGASO, DUCATI SCRAMBLER, DUCATI SCRAMBLER
Genuine DID replacement chain link
As I said before, I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERV7 is one I do not surrently have in stock so no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. These chains are generally used on tracxk bikes from a 530 or 525 conversion so I do use a lot of them. As you can imagine, I go through a lot. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: DUCATI 350 INDIANA 87, DUCATI 350 SS 92-93, DUCATI Scrambler 16, DUCATI Scrambler 16, KAWASAKI GPZ500, KAWASAKI Ninja500 07, KTM 390DUKE, KTM 600 ER 85, KTM 600 GS 4T 85-92, KTM 600 INCAS 89, KTM 600 LC4 93, APRILIA PEGASO600, APRILIA WIND (i.e. the World Wide Web), DUCATI 400SS, DUCATI 400SS, DUCATI 600SS, DUCATI 600SS, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER600
Used for Ninja250SLCircuitSpec.
I used it on my Ninja 250SL with CircuitSpec. It is definitely better than the OEM Chain that was originally installed.
Since it is a RACINGChain, its durability is not as good as it is now. It is a RACINGChain, so its durability is not so good at present.
View detail
Fits: HONDA 250T, APRILIA RS250 (Aprilia), APRILIA RXV450, APRILIA RXV550, APRILIA SXV450, APRILIA SXV550, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650, BMW G650 XCHALLENGE, BMW G650 XCOUNTRY, BMW G650 XMOTO, DUCATI 600SS, DUCATI 748, DUCATI 748, DUCATI 748, DUCATI 750 Santa Monica (88), DUCATI 750 Montjuich (87)
Replaced
When I bought a used Motorcycle, the Chain had rust in some places and needed to be replaced, so I considered whether to use the Gold color or not and decided to use this color and Spec. My Motorcycle is a 108LINK, so I bought a 110LINK and cut it to 108LINK and installed it because it is +4000 yen more expensive than the 110LINK when purchased from webike. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
Standard Windshield IRIDIUMSpec. I can't tell the difference from normal Plug.
I bought a used CRF250RALLY50MD44 with 12,000 km on the odometer and replaced all consumable parts.
Iridium plugs were adopted as standard, which was not expected.
I cannot experience that it starts particularly well or is Torque fully.
I have owned almost all 250 Class Trail bikes and Motard bikes, including those of other companies, so I am certain of this.
It's an expensive Plug, so I'm going to run it in with high hopes for durability at least.
View detail
Fits: HONDA CB250F, HONDA CB250F, HONDA CB250F <ABS>., HONDA CB250F <ABS>., HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., SUZUKI GLADIUS 400 ABS (GLADIUS650), SUZUKI GLADIUS 650 (GLADIUS650), SUZUKI SV650 ABS, SUZUKI SV650 ABS, SUZUKI SV650X ABS, SUZUKI SV650X ABS
SV650Rear Brake Pads replacement
Rear Brake Pads on a 2022 SV650 were replaced.
I have driven about 100 km since the replacement and will post my impressions.
The OEM had about 9,000 km and it was time to replace the Rear Brake Pads, so we chose NTB for its good cost performance.
Operability is gentler than the OEM, and I felt that if I did not consciously step on it hard enough, it would not work as well as the OEM.
For those who prefer a gusto effect from the beginning, I think it will be less satisfying.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
![VX Series Chain 520VX3 Silver [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: KAWASAKI KLX650SR, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, HONDA FTR250, HONDA CRM125, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, HONDA Rebel300
I like the chain
I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. -------------------------------------------------- -------- I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. Powered by Google Translator View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
It's comfortable
The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. It's good ------------------------------------------ ---------------- The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. Good. Powered by Google Translator View detail
Fits: HONDA CB250F MC43 all models, HONDA CBR250R MC41 All models, HONDA CRF250 L MD38 All models, HONDA CRF250 M MD38 All models
Purchased for PowerBox installation
Purchased for PowerBox installation.
One piece is all that is needed.
I had a hard time removing the old Gasket.
The new one, after applying liquid Gasket.
If it is attached, it will not come off.
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125, HONDA CT125
This is what a luxury Lever is:??
Mukawa High Quality Lever??
Texture and structure are both good!
I just think 20,000 yen is a little too much ….
View detail