Reviews
Fits: HONDA Ape 100, HONDA Ape 50, HONDA monkey, HONDA monkey, HONDA DREAM50, HONDA GORILLA, HONDA GORILLA, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE TypeD
carrying out the well considering the price and coming to swerve also from brightness -- it is . Since touch of plating is good and a size is also good exactly, it is pleasing.
carrying out the well considering the price and coming to swerve also from brightness -- it is .
Since touch of plating is good and a size is also good exactly, it is pleasing.
View detail
Fits: Others , HONDA GB400 TT, KAWASAKI ESTRELLA [ESTRELLA] RS, KAWASAKI ESTRELLA [Estrella]., HONDA XR250, HONDA XR250 Baja, HONDA XR250 R, SUZUKI GOOSE350 [GOOSE]., KAWASAKI SUPER SHERPA [Super Sherpa]., KAWASAKI KLX250 SR, KAWASAKI KLX250 R, KAWASAKI KLX250 ES, HONDA XLR250 R, HONDA XLR250 R Baja, HONDA AX-1, YAMAHA SRX600, YAMAHA SRX400, SUZUKI SKYWAVE250 [SKYWAVE]., SUZUKI GRASS TRACKER, SUZUKI DR-Z400S
It up(ed), so that idling was stabilized and torque could also be realized, when it changed into the hot wire before, although split fire was attached. It can run without difficulty also by a higher gear, and a little, although a price is stretched, w
It up(ed), so that idling was stabilized and torque could also be realized, when it changed into the hot wire before, although split fire was attached.
It can run without difficulty also by a higher gear, and a little, although a price is stretched, we recommend it to the direction of a one cylinder by all means.
Seemingly, an after plug has good normal.
Seemingly, it is not good for an engine in case of iridium.
The direction of the motorcycle shop had told.
Since ... was thought when cheap to a slight degree, *4 piece was used.
View detail
Although there was a lineup of 35.33, it was dared to choose 33. also sometimes called it the carburetor for races truly, and even if it compared that it was pure, accelerating force became good considerably! however -- if it comes to exchange for thi
Although there was a lineup of 35.33, it was dared to choose 33.
also sometimes called it the carburetor for races truly, and even if it compared that it was pure, accelerating force became good considerably! however -- if it comes to exchange for this acceleration although fuel consumption worsens -- 笙ェ which is not regrettable at all
View detail
Although it had ridden on the motorcycle with a center stand until now, since R1 was purchased and maintenance stands were used for the first time, it purchased this it was a stand for the first time. [ that seems to be safe ] As it was also in an art
Although it had ridden on the motorcycle with a center stand until now, since R1 was purchased and maintenance stands were used for the first time, it purchased this it was a stand for the first time. [ that seems to be safe ]
As it was also in an article introduction, the first person also thought anyhow that he could do simply.
Since it goes up lightly and a stand does not separate, I think that safety is also high.
If it lends, there is nothing, when you forget Locke of a brake and it will push down carelessly, isn't there nothing?
If a receptacle is changed, charm also corresponds to a tire change etc.
I also purchased the hook bolt and V receptacle collectively.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X
It has attached to KLX. Being as it goes into an overall diameter also among EX pipes marketed, an omission becomes quite good. Comparatively [ the ] a price is also handy and, moreover, attachment is also easy by normal gasket specification.
It has attached to KLX.
Being as it goes into an overall diameter also among EX pipes marketed, an omission becomes quite good.
Comparatively [ the ] a price is also handy and, moreover, attachment is also easy by normal gasket specification.
Although I combined with the RSV series 1 and 2 grades, I felt that torque became thick.
It is better to purchase, after considering whether what we do with this first since it will carry out although pants are burned immediately and a guide peg is burned if it does not make on one's own as a problem of this EX pipe in order that there may be no heat guard.
moreover, although a normal gasket can be used, the slit for clamping be short comparatively [ with a deep receptacle portion ], and hold down enough at it -- since there is nothing and exhaust leakage is started from a connection section, recommendation applies an liquid gasket.
It is recommended at KLX and those that consider exchanging since the normal EX pipe is thin in case of D tiger after 03!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
(Cling to the Peyton norton type muffler) Browned surface follows immediately after engine start, and it is quite color condition! Rather than the exhaust pipe of normal, blow going up of a high rotation area became good, and became light. -- The torque i
(Cling to the Peyton norton type muffler) Browned surface follows immediately after engine start, and it is quite color condition! Rather than the exhaust pipe of normal, blow going up of a high rotation area became good, and became light. -- The torque in a low speed area is also the touch which does not need to become thin too much. View detail
This product also needs to purchase a brace together. He purchased by appearance serious consideration rather than the engine performance. I was not able to think that there was an effect, so that it can be felt. Since it only stops with a bol
This product also needs to purchase a brace together.
He purchased by appearance serious consideration rather than the engine performance.
I was not able to think that there was an effect, so that it can be felt.
Since it only stops with a bolt when attaching, I think that it is easy.
Since the die length of a brace merely changes by a vehicle type, cautions are required.
Let's purchase after counting the size attached firmly.
Since a brace and a clamp are abundant in color variationses, the product made from posh comes to any vehicle types exactly, and it thinks that it can equip a beauty since there is also several kinds of die length of a brace.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Since he wanted to make a lever into Black, it purchased. Although I think that the portion of attachment of a wire is troublesome just for a moment, I think that it can do immediately. Although a feeling of a physical disorder was immediately aft
Since he wanted to make a lever into Black, it purchased.
Although I think that the portion of attachment of a wire is troublesome just for a moment, I think that it can do immediately.
Although a feeling of a physical disorder was immediately after changing since a form is different for a while in it being pure, it has got used immediately.
Since structure is also regarded as their being goods good with a price not being so high, I think that it is a recommend to a direction to change a little image of appearance into.
View detail
It attaches to XTZ125. Since it was the design of an on-road twist from the first, when it saw as an off-road vehicle, since the handle was low, XTZ was introduced. Since record of Ho who attached the parts which make a height change of a handle o
It attaches to XTZ125.
Since it was the design of an on-road twist from the first, when it saw as an off-road vehicle, since the handle was low, XTZ was introduced.
Since record of Ho who attached the parts which make a height change of a handle of this sort to XTZ until now had not been seen,
It did not understand whether attached or not, but when not attached, it was worried about what it will do, but it was attached that there is no difficulty also in XTZ made from a brazil so that it might be the common standard practice which is somehow called circumference of a handle.
Structure of a product was also enough for 3000 yen, and since position changing of the handle was completed for only 3000 yen, it was good.
If many things must be attached, it must remove, or high wages must be paid, if handle exchange is carried out, but it is this, it is an individual, and since height adjustment can be done simply and at a low price, it is recommended.
View detail
Fits: SUZUKI TL1000S, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
The configurations where it does not break from a root are also secure goods for me of a touring subject as well as the high grade feeling. Since 2 cliffs in an index finger and the middle finger are the die length which comes exactly when metallic bl
The configurations where it does not break from a root are also secure goods for me of a touring subject as well as the high grade feeling.
Since 2 cliffs in an index finger and the middle finger are the die length which comes exactly when metallic blue color matches the blue car body of a hayabusa dramatically and die length is also attacked, I am very easy to grasp and think whether to be a made lever which will be made into an all-round.
A billet lever is also recommended although a price is carried out so so.
Antlion lever having a high grade feeling and a high using feeling! It is recommended.
View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Since it had ridden and got used to the sports type motorbike, what does not have what hits at all in a left knee was in the half done state, and although it was very uneasy, sense of security came out of it considerably by the knee grip bar. It is co
Since it had ridden and got used to the sports type motorbike, what does not have what hits at all in a left knee was in the half done state, and although it was very uneasy, sense of security came out of it considerably by the knee grip bar.
It is completely different by that it is although there is only an effect stabilized in a knee location rather than a knee grip, and there being nothing.
It is the kana about which it is seldom necessary to care since a step position etc. are not right-and-left objects although it has not balanced on either side unless it projects a few, which is said correctly and which will be rich.
If it pushes strength, it slightly hurts.
View detail
It had ridden only on the motorcycle with a cowl until now, and he rode on the naked for the first time, and was surprised at the wind pressure, and it purchased the guyra shield of wind-pressure reduction effect size and reputation. As a good point,
It had ridden only on the motorcycle with a cowl until now, and he rode on the naked for the first time, and was surprised at the wind pressure, and it purchased the guyra shield of wind-pressure reduction effect size and reputation.
As a good point, the protection-against-wind effect is wonderful as reputation! High speed operation of 80 km or more was no longer pain.
If a shield is made into the location stood most as a dissatisfaction point, the front of solvent of a shield should start a headlight, an eyelid should fall and the countenance of the motorcycle seen from before be visible to a face which is sleepy.
.
.
I feel that Wright is interrupted a little by the after high beam.
Since the attachment description enclosed is unclear, if attachment explanation with the photograph in the homepage of a chic design and the point are followed, it will be attached simply.
(It is attached without it taking 1 hour, if there is an orderly tool.) Although many things were written, if you want the function of protection against wind, this article will think wonderful !.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
although the friend attached while the classic was having a large custom a long time ago -- this time and 70 -- it was able to be happened to think that it will be made s touch I think that it is the touch convenient to raise and to stick to a wall at
although the friend attached while the classic was having a large custom a long time ago -- this time and 70 -- it was able to be happened to think that it will be made s touch
I think that it is the touch convenient to raise and to stick to a wall at back which may be carried out and only one of the two may attach when putting into a car barn.
View detail
Fits: DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster]., DUCATI MONSTER S4Rs [Monster]., DUCATI MONSTER S4R [Monster]., DUCATI monster s2r1000 [monster]., DUCATI MONSTER S2R [Monster].
S2R800 was equipped. Rear suspension could be protected from dirt and appearance also became very good. Wearing was also comparatively easy and the location of the mounting hole was also correction needlessness.
S2R800 was equipped.
Rear suspension could be protected from dirt and appearance also became very good.
Wearing was also comparatively easy and the location of the mounting hole was also correction needlessness.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SF
Since he did not like a pure fender, it purchased. Working hours: Required 8 mm 10 mm 12 mm of tool:wrenches, 4 mm 6 mm 8 mm of hexagon wrenches, plus driver, and cookbook with an adhesive-bond plus point image stick for about 30 minutes, and it was a
Since he did not like a pure fender, it purchased.
Working hours: Required 8 mm 10 mm 12 mm of tool:wrenches, 4 mm 6 mm 8 mm of hexagon wrenches, plus driver, and cookbook with an adhesive-bond plus point image stick for about 30 minutes, and it was able to do work on the smooth.
The circumference of a tail feels it refreshed considerably.
Construction material also often has sense of security also in respect of durability.
If management and the connecting part of minus point wiring are explained by the picture of up, they will work more easily.
In the case of attachment of a notes kit, it is hard to bolt up a frame and the bolt of a kit connection part.
If it constructs by a temporary stop, it will be still loose wearing.
View detail
since its own car saw the 8th year and the crack of a tank has been conspicuous -- crack hiding -- it purchased. Because wearing carried out alignment in advance, there were no difficulties in particular. A result has dramatically few crevices, al
since its own car saw the 8th year and the crack of a tank has been conspicuous -- crack hiding -- it purchased.
Because wearing carried out alignment in advance, there were no difficulties in particular.
A result has dramatically few crevices, although it pasted up with double-stick tape, and it is dramatically good-looking for it because of real carbon.
It is the touch which also completely loses a crevice, without using a liquid adhesive bond and taking time in alignment, if there is no intention of removing again.
View detail
It had always attached to the vehicles to Kon by abrasion prevention of a tank. In crack prevention, it is the highest! It attached to 08 peregrine falcons. Although the width of selection became large when things also had vehicles and white had a
It had always attached to the vehicles to Kon by abrasion prevention of a tank.
In crack prevention, it is the highest! It attached to 08 peregrine falcons.
Although the width of selection became large when things also had vehicles and white had a thing of a clear base more -- Since ~ favorite is also found well and it has also become a one point of the tank, it is satisfactory.
A recommend gets damaged in the more disagreeable one.
View detail
The report of this product was read with the motorcycle magazine, and it opted for purchase. I asked attachment of Diller at the time of a periodic check of the own car ducati S4R. The battery of S4R is under a tank, and the work which lifts a tan
The report of this product was read with the motorcycle magazine, and it opted for purchase.
I asked attachment of Diller at the time of a periodic check of the own car ducati S4R.
The battery of S4R is under a tank, and the work which lifts a tank is likely to take time and effort a little.
But I think that a great thing does not have a direction [ that it could fix ].
It seems that now, it stops using a nerve for the clutch meat in the case of the increase of a low speed torque, and start so much as a report, and the elongation at the time of high rotation is also clearly good although it is operative.
Muffler sound (a muffler is make of the other company) is also gaining in the heavy low.
It seems that expectation is seldom possible on a level to the extent that fuel consumption became a little good.
Although various additives etc. have appeared on the market, is it tried on this for the time being?
View detail
Fits: その他 , HONDA DIO FIT, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, YAMAHA MATE50, YAMAHA YV50 Z II, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, SUZUKI ZZ
It attached to the address V125. Although the smartness of conspicuity or appearance is a white ghost, its clear is legible on the night of a rainy day. The direction where a rainy day also rides is cleared. Is the white ghost of the direction
It attached to the address V125.
Although the smartness of conspicuity or appearance is a white ghost, its clear is legible on the night of a rainy day.
The direction where a rainy day also rides is cleared.
Is the white ghost of the direction which does not ride recommended?
View detail
Fits: YAMAHA SR400 VM Carb, YAMAHA SR500 VM Carb, YAMAHA TW200, KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250, YAMAHA SR400 VM Carb, YAMAHA SR500 VM Carb, YAMAHA TW200, KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250
The other day, I was allowed to purchase and it attached instantly. In the carburetor of NSR250, with the relation of the pitch, although it was impossible as it was, it cut a little, and the rubber of the carburetor attaching part was attached someho
The other day, I was allowed to purchase and it attached instantly.
In the carburetor of NSR250, with the relation of the pitch, although it was impossible as it was, it cut a little, and the rubber of the carburetor attaching part was attached somehow and carried out.
comment -- when it says, it is a gadget to the extent that it can feel clearly.
It is frank comment to show the explosive acceleration to which the front which does not have acceleration until now comes floating, whatever it may call it (a chamber and the talk which carries out M/J exchange), and for treatment by a low speed not to be awkward, either, to become very easy, and to become easy to ride. ---
Since it is called his 30's more and he is not young, although - [ which compares ] appearance with philharmonic power of a SUMIMASEN certain D company cheap from before a suction noise also worries [ - ] others' eyes somewhat converted, and it attached with the kana ? right [ that ] and good and being carried out,
Since it was always influenced by climate etc. and there were not honesty and good recollections when a little vulgar tone quality (seemingly he is boy), peak, etc. went, the ramair was used this time... It attached and very much satisfied with the suction noise which is not quiet, very comfortable, and showy of the suction noise.
It is YO which I regard as it being worth trying although a price is a high price a little!! If a maintenance kit is cheap to a slight degree, it will think that it is the highest, but it was allowed to use four stars by calling it ...
View detail