Reviews
Fits: HONDA Rebel250, HONDA Rebel500, HONDA Rebel300, HONDA Rebel300
Increased stability
Narrower Side Stand,
Purchased because it was unstable depending on where I parked.
It is thicker and more stable.
Installation was easy, but a Hexagonal Wrench is required.
The size of the Hexagonal Wrench was not mentioned in the product instructions, so that is a point of dissatisfaction.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
Position will be easier.
After the installation, the position of the handlebar was dramatically improved, especially the upper body became easier. It is easier to install the DAetc. However, when the Handlebar is cut to the full Left position, the gap with the Tank is very small, so I think it is necessary to be careful when attaching attachments around the Handlebar. View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
MTMODEL×OEMWIN deCowl with high installation difficulty
After much research, I found out that the difficulty level of installing a Handlebar Riser increases dramatically just because it is an MTMODEL Rebel 1100, and it has an OEM cowl, which is even more difficult to install.
As mentioned earlier, the MTMODEL has a patched Clutch Wire, so it is necessary to change the handling to a good one, which increases the difficulty to a degree that you cannot imagine when watching a video of a quick Youtube installation repo with a DCTMODEL.
In addition, in the case of my Motorcycle, because it was equipped with an OEMWIN de Cowl, if this is attached, the Cowl is removed and converted to an Exclusive Bracket, and the difficulty of installing ・・・・ and the Handlebar Riser itself seems to increase dramatically, so I recommend that those who do it on their own are familiar with it and are prepared to install it. Therefore, it is recommended that those who do it by themselves should be prepared to install the Handlebar Riser.
I don't see many repos with this Handlebar Riser in combination with MT×OEMCowl.............................good luck to those who do it by themselves.
Also, the Motorcycle store had to cut out a part of the plastic cover where the clutch wire and other wires are located. If there was no OEM cowl, it might have been possible to handle the wires by just routing the wires, but it seems that the wires could not reach the cowl if it was also attached.
As for the conversion after installation, the conversion was that it did not move backward as much as expected. However, it is still overwhelmingly Quantity in the backward and upward direction.:It is true that the bike is set back, and I can now ride with a hunched posture like when I ride a Harley instead of the leaning forward posture I used to have with my arms pinned and stretched. (However, due to my short arms, my arms remain the same as Pin and taut.) 。
It is pricey, but it is effective, so if you can, you may want to put it on about as soon as you take delivery of the car.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
Ride Attitude Solutions
[How is it used?
I started considering it because I am 169 tall and the Handlebar is a little far away and my upper body gets tight when I ride for long periods of time.
Personally, I think Handlebar is I want to pull it moderately forward, not up." We chose this one because it seemed to best meet our needs.
Was the one you received as per Image?
Texture and cloisonne ware? is satisfactory. It is almost invisible Parts, but …
Was the installation difficult?
I asked N○PS to do it for me. it seems to be a little difficult to handle the Wiring from what I see on YouTube etc. The labor cost was less than 8,000 yen.
How was your experience with it?
I can feel that my riding posture has changed considerably. It has become very comfortable and driving has become even more enjoyable.
I think the price is high, but I am also very satisfied.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I try not to pay too much attention to it, but it looks quite different, and it's obvious if you don't have the Cowl or Meter visor attached. The front view looks a bit dumb with the distance between the Light and Meter opening up.
If you are concerned, you may need to take action to add Cowl or Visor.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel500, HONDA Rebel250, HONDA Rebel300, HONDA Rebel300
It's a lot easier to ride.
When I was riding my REBEL 1100, I felt like the handlebar was too far away from me, so I was looking for a way to pull the handlebar forward, and I found Earls Gear's Handle setbackRiser. (For REBEL250 and REBEL500) So I bought it and asked HondaDREAM shop to install it.
I was told that if I install the hose as it is, the brake hose would be too tight and it would be dangerous to cut the HandlebarLeft, so I had them change the way the brake hose runs.:Pair (for Left and Right) So I had the angle adjusted slightly and completed the installation.
The Handlebar has been pulled forward to make it easier to ride than the NORMAL state. (>ω<) He's short. (We are 162cm tall.) If you feel that the Handlebar is too far away, you can try it;
View detail