Reviews
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Cl500
Cl500 I don't know if it's a disadvantage or an advantage, but the key box is on the side. It's not visible at all when riding, and it's not visible even when parked. So I have to find the key box. I'm still not used to it. So, it's a key that's visible to the eye and can be dressed up. It's colored red. It's not completely red, but it's easy to see. It's a double-sided tape adhesive, but I believe it's made in Japan and recommend it ------------------------------- --------------------------- I don't know if it's a shortcoming or advantage of the CL500, but the keybox is next to it. I can't see it at all, and I can't see it when I park it. So I have to find the keybox. It is not a perfect red, or it is well visible. Powered by Google Translator View detail
Red color on Black background, austere and easy to see the keyhole position.
I bought it to change its appearance, and it was the right decision to install Large. The reasons are as follows:(1) The appearance became cooler, and the red color looks good on the black background. (2) It became easy to confirm the key insertion position. (3) The installation was done with the attached double-sided tape. It does not take much time. (4) Reasonable price for PetitCustom. View detail
![[K TOUR] USB Power Kit](https://img.webike-cdn.net/catalogue/images/78922/a_1_TS.jpg)
USB Power Kit
It was installed on a 2023 MODEL REBEL 500.
There is nothing wrong with the product itself, but it says to just connect the Wiring, but there is actually no electricity flowing to the connected wire, so I asked the Motorcycle shop and found out that I need a Relay to run electricity to this Wiring.
There is a place to install a Relay under the tank, and a dedicated Relay could be installed and used.
Relay is 38501-MKP-DN1 and is Honda OEMParts.
I think there is another way to connect the power supply, but I think it is better to check if Relay is available before purchasing.
View detail
Good for One Point
I'm just happy to be One Point.
If I may say so, it is thicker than expected and looks like it sticks out.
Anyone can work with it, as it is simply attached with double-sided tape.
I don't know about durability, but the adhesion is strong and not likely to come off.
I think flashy colors are better than subdued colors as one point of reference.
View detail
It did not easily attach to the 2023MODEL
I installed it on a REBEL250 2023MODEL, but there is no ACC power supply to the harness behind the meter, so I had to generate a new ACC power supply from the Rear Brake Switch.
However, the product itself is of very good quality, more OEM-like than OEM.
The finish is satisfactory.
View detail
Fits: HONDA Rebel300, HONDA REBEL500, HONDA REBEL250
I used it to take out the ACC from the REBEL.
[How is it used?
I used it to take out ACC of D-UNIT.
Was the one you received as per Image?
Yes
Was the installation difficult?
It was easy because all I had to do was remove the Side cover and insert/remove the Cable.
How was your experience with it?
No problems with dislodging or not fitting.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It takes a little ingenuity when installing and fitting it, and the ACC line should be raised up from the inside of the Frame!
We did not use the Earth line.
View detail
Fits: HONDA REBEL500 , HONDA REBEL 250, HONDA REBEL 250, HONDA REBEL 500, HONDA CB650R, HONDA CBR650R, HONDA CB1000R
Easy to take out the power supply.
I want to install a Grip heater on a 2019 Rebel and add a Bullet Type Terminal.
The installation method is described as a reminder.
If you install it yourself, do so at your own risk.
Installation time:1 hour (except for Grip heater)
Required tools:Ratchet wrench (hex 6mm, 8mm), Curing Tape, Towel
*It is easier to do with less fuel if possible.
Remove the MainSeat (6mm hexagonal).
Protect the tank and frame from direct contact by curing tape, etc.
You can also put Towel or something in between.
Remove the bolt (8mm hexagonal) from the tank.
Lift the Bolt hole of the Tank and remove it from the Frame.
Shift the tank horizontally to the Seat side (just enough to check the bottom of the tank is OK).
Check that the black coupler is attached near where the cords are located on the Right Side (where it is attached).
? Remove the Coupler terminal already attached and install this product so that it is in the middle.
Install Attachment if it is to be installed.
? To put it back in, follow the reverse procedure when removing it.
View detail
Fits: HONDA Rebel300, HONDA REBEL500, HONDA REBEL250
Convenient
Attachment power can be obtained by interrupting the OEM's vehicle Harness with a Coupler.
Since the wiring has already been completed, you can safely and securely install electrical parts from Other Brand Products.
View detail
Fits: HONDA REBEL500 , HONDA REBEL 250, HONDA REBEL 250, HONDA REBEL 500, HONDA CB650R, HONDA CBR650R, HONDA CB1000R
Note Bullet Type Terminal
Since it is a compliant product, power extraction was very easy.
Note, however, that the Bullet Type Terminal is Female for both Plus minus and minus.
Most of the Bullet Type Terminals for electrical components are Male on the Plus side and Female on the Minus side.
Therefore, it needs to be processed by Electric Works Pliers, etc. to connect.
View detail
Fits: HONDA Rebel300, HONDA REBEL500, HONDA REBEL250
The power is safely removed.
A ground cable is also included to increase efficiency. View detail
Fits: HONDA Rebel300, HONDA REBEL500, HONDA REBEL250
You can buy peace of mind.
REBEL250 2020MODEL (The LED Headlight one.) It was available at
As shown in the official website, the RearStop lamp from the panel next to Seat on the Right Side
I bit into Harness and got the power supply.
Direct USB for DAYTONA (93039) to Bullet Terminal, and it is possible to use it without a problem in the connection.
However, because it takes a place of convenience to interrupt Harness
It was Limit to reign in the Side Panel.
If you want to take SMART, you can use it with Bracket next to Meter, which is also from KITACO.
I think it's better to use a USBKit that you can take.
View detail