Reviews
สินค้าตัวนี้มีของพร้อมส่งเลยไหมครับ ต้องการใช้ด่วน View detail
ส่งเร็วทันใจสินค้าสมบูรณ์แบบไว้ใจ webike อุดหนุนตลอดครับ View detail
Ikazuchi Tube! I love the name.
Sticker placement is left up to the User. View detail
Fantastic
Super easy to apply with the sperately sold tool. Just follow(translate) the instructions & away you go. Make sure the rim is clean & that you spray each segment of rim with water immediately prior to applying the sticker. Be sure to work out any air bubbles etc from the application process. If it's not sitting correctly-immediately peel back and start that section again before the adhesive begins to bond. It also helps to use a hairdryer on each section after application. The mirror finish really pops, especially at night if light reflects off it at an agreeable angle. View detail
Handsome modification
About quality and texture: Good About the feeling of use: Exellecent About Design: Functionally Aesthetic About Size Chart: Accurate Cost performance and comparison with other products: affordable About shipping and packaging: well and safe. Any concerns, cautions, or advice when purchasing: make sure to know what screw size your mirrors are, these adapters are in M10 View detail
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
Worn Dry Clutch Components
Excellent set of products, sorted out Dry Clutch issue where Dry Clutch components had worn so much Clutch wouldn't disengage and spin freely. Now all working as it should. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
This is the overall satisfaction level for ass pain measures
Since I bought a z900rs, I have been worried about the ass pain that everyone else is suffering from,
I have been studying all over the Net and watching YouTube.
There were many candidates, but we chose DOREMI for quality, cost performance, and delivery time.
The product was out of stock due to its popularity, but thanks to the power of Large Hand Wafer Big, we were notified that the product would be in stock soon and it was delivered.
The Tandem seatBelt requires a hole to be made by myself, and although I was nervous, I was able to make the hole without difficulty,
Belt could also be attached, although it is a little stiff.
I usually get an ass ache as soon as I go touring,
I felt that it was considerably eased.
Footing is a little worse, but not a problem at all in exchange for butt pain.
I would highly recommend it to anyone who is unsure about Seat from another company.
The quality is as good as OEM is also recommendation.
View detail
Good quality & Recommended OUTEX Honeycomb Catalyzer 33060-10IN38
I'm using honda hornet 250DX.This is a late verson of manufacture.Im looking for changing chrome silencer bend which is use in hornet early verson.but unfutunatly early verson crome silencer bend doesn't include with catalizer.Finally i found this in webike and this will perfectly fitted in to the middle of silencer which is rich to exhaust temperture +300C above. Qulity of outex catalize is very solid and serial number and brcode will print on outside of wall. After using catalizer, earlier engine thin sound(without catalizer with silencer bend) will desapire and smell of gasoline will reduce. Even reduce air polution too. This Ctalizer i will recomnder for motocycle enthusist View detail
Good product.
This single pole locks the Porch columns and two Motorcycles together.
One end has a Ring and another Ring is attached, so the length of the Chain can be used effectively.
The Chain itself is of standard construction, but I would recommend it because of its length for the price, which, together with the aforementioned points, makes it easy to handle and to use the so-called "earth lock".
I have no complaints about the Pad lock that comes with it in terms of functionality, but the Body is Material:Plastic and cheap looking and may be somewhat less secure. (I use another lock that I have on hand.)
View detail
YOSHIMURA - Key Chain -Black
Size of key holder is small.it can be eazy ro kepet in pocket. The leather part is black which i orded , YOSIMUSRA logo emboss & stamp on it The leater strip fold and stick with glue which is not harder and eazyly came out.(i put personaly leather glue & it will perfecty solid after ) This is a good Key Holder for YOSHIMURA lovers. View detail
![[Repair parts] Disc lock for stroger chain lock](https://img.webike-cdn.net/catalogue/images/116328/31255_TS.jpg)
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
Convenient locking by pushing in
The simple shape, light weight, and compact design are also good.
I use it with another Manufacturer's Chain at home and as a Disc Lock with Single Body when I am on the road.
Rubber lids are sold as Repair Parts and may be purchased in advance.
View detail
Pre-installation impression
The Instruction Manual was not included in the package, but can be found on the product page of the official ENDURANCE website. It is recommended to check the contents before purchasing.
The product is made of steel sheet gold, so it does not have a luxurious feel, but the machining precision and the texture of the paint are good, and it does not look so cheap.
The ENDURANCE Logo is a Sticker, so you don't have to put it on if you don't need it.
Low head cap bolt for Case mounting (M6, hexagon socket) and HexalobularBolt for fixing the lid (M5) was included in the package.
Hexalobular (Torque) was supplied with a Wrench, but a 3mm Hexagonal Wrench and 10mm Spanners are required to tighten the Cap bolt.
To store the ETC in the Case, simply affix a protective sponge tape to the Case and place it inside.
Since this is a universal product, it is necessary to arrange an appropriate bracket separately for installation on the car body.
The dimensions of the holes available for installation were described in the Instruction Manual for handling.
The case does not have waterproof or dustproof features, but I think this is sufficient because it prevents direct exposure to rain in addition to the waterproof feature on the ETCBody side.
In general, it is sufficient for my needs, but I feel that the price is a bit expensive since there are many other with-key products available for a little more money.
View detail
Let's put it on.
It is very effective Large. First of all, however, the smallest turning radius becomes large due to the body contact stopper, and it is necessary to turn around when turning in narrow parking lots, etc. There is no problem in driving itself.
Single-cylinder vibrations transmitted to the handlebar are reduced, making driving easier.
It is now safe to enter a rough Curve with a Gap.
It looks like a body on a top ranking.
The construction is beautiful and satisfactory for a cut-out plate.
If the price is acceptable, we recommend that it be installed.
View detail
dirt prevention
The fabric is Polyester.
It is not lined, so it is not expected to be waterproof like Tarpaulins fabric.
The cover area covers the front and four sides of the bag. Due to its structure, the back of the bag can be covered only slightly.
It is a special product, so the fit to the bag is good. There is no worry that it will come off while driving.
Older types could be identified top and bottom by looking at the Logo, but the current product has no Logo printed on it, so it is necessary to check the position of the drainage hole.
The quality and texture is neither good nor bad.
View detail
impossible
When I received the package and checked it immediately, I found that the Package had already been opened and the product itself was not in the package.
Why is this not noticed when packing?
I have used many different mail order services, but this is the first time I have seen such sloppiness and I feel bad.
I don't want to give even one star.
View detail
It was not enough.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
I'm sorry.
There is nothing wrong with the functionality, except for the Bolt section Material:Plastic and molded BALI are also available and do not appear to be of very good quality.
There are similar MirrorRepair Parts by TANAX, which are made of Gold genus and have a much better finish. (but it is heavy + has a weird logo mark of Tanax)
View detail
![[F.C.C. x JOSHO1] SPORTS CVT](https://img.webike-cdn.net/catalogue/images/99535/165390413_TS.jpg)
For the first time Pulley
Quantity from NORMAL's mellow:Just by replacing a set of sets, you can run comfortably.
The Lightweight Pulley Boss can also be replaced for even better response.
View detail
JetSetting
Since it is a KEIHIN OEM, it is safe to use.
I lost it and purchased it, even though I adjust it based on temperature and humidity.
View detail