Reviews
Easy search
It is easy to search for the parts I need. View detail
Fits: KAWASAKI ZEPHYRX, SUZUKI GSX400, KAWASAKI ZEPHYR400
Reasonable Super Motorcycle Bar
I was looking for a handlebar that was not too tight and not too low like the Handlebar Post, and I found this product.
I am satisfied with both the price and the quality.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA integral, HONDA NC700S, HONDA NC700X, HONDA integral
value for money
After replacing the power supply plug, it can be installed on the NC750S Gen.1, and the quality of the entire vehicle is improved. Although the materials and workmanship are not as good as SP Wuchuan, the price is more reasonable and it is worth the money. It would be better if it has a blackened appearance and matches the original car turn signal. -------------------------------------------------- -------- After replacing the power supply plug, you can install it on the NC750S Gen.1, and the entire vehicle texture has improved. Although the workmanship is not as good as SP Wuchuan, the price is more reasonable than it, and it is worthwhile. If there is a better appearance, it is matched with the turning light of the original car. Powered by Google Translator View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Better than OEM
Vibration is reduced by being heavier than OEM.
Also, in the case of zx4r, with OEM, I was hearing a chattering sound from the Left Side, so that will be eliminated as well.
I wonder if the replacement product has a slight gap (see image).
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI V-STROAM650XT, SUZUKI V-STROAM650, SUZUKI GSX-S1000GT, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM1050, SUZUKI GSX250R, SUZUKI BURGMAN400, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI GSX-S1000
I'll think about it a lot.
This is the first time I have installed an UltraHeavy weight Bar End.
I thought the heavier weight would reduce vibration….
I have only ridden it a little bit, but it doesn't seem to vibrate.
I don't know how it will look when I get on the highway, but I wonder if it will be Large sturdy?
However, since it is heavy and large, it is thicker than the Handlebar, and I feel uncomfortable when driving it where it is different from the Handlebar.
The handlebar has been replaced with a handlebar that is up and narrower than the OEM handlebar, so I feel that the weight of the bar end sharpens the cutting angle when turning.
I hope I can get used to it and stop worrying about it, but if it bothers me a little, I will consider replacing it.
View detail
The finish is beautiful.
I purchased this for an Aluminum Footpeg Kit made by a certain KATANA specialty store in Chiba, Japan, which is installed on my KATANA.
Cut-out Shift Pedal that was first designed for Kit is non-slip
I searched on Amazon and found only products made in China.
The first time I bought it, it was a compromise, but it seemed to be more decent than the Original.
For the time being, I am no longer worried about Shift change because the tip of the shoe does not slip.
However, the Knurl process is not Edge standing at all, and most of the “Knurl-style lines ”.
It was like that.
This time, I found out about this new product on the Net and immediately purchased it without hesitation.
I am extremely satisfied with the parts I received.
View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Appearance ImpactLarge
It would have been best if the Mounting Bolt had a Screw lock agent. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Cosmo
Note that the OEM LED Blinker has a Large Coupler and will not fit through the wiring hole.
Other than that point, I'm glad I bought it.
View detail
Installed on Z900RS
I had the internal Heavy weight, so I bought this one in Champagne gold for the purpose of changing the color of the Bar End. The texture is very good and it is just beautiful. I wish it were a little cheaper, but I am satisfied with it. With this size Heavy weight installed, I hardly feel any vibration on the Handlebar. View detail
POSH Faith Ultra Heavy Bar End Outer
SRX has a longer Bar End as Standard Equipment, but it is already discontinued.
While products of similar length are hard to find, this one is just right, although it is one size too large.
View detail
Only for car model-specific
I had a DOREMI Emblem, but when I installed the DriveRecorder, I bought this and replaced it with a PMC Emblem.
The mounting position and angle of the Emblem and Camera were also to my liking.
Quantity of Bolts required to install the Emblem and Camera in the car model Exclusive Design.:I appreciate the fact that it is a Set.
View detail
If Black!
It is used on brembo's Radial brake master 14RCS.
I bought a PLOT Tank BracketBPS002-BB at first, but the rubber hose was bent in the middle. I searched for a lot of information and came up with this product.
This product allows the S-15BTank to be fixed in an almost perfect position and angle, with a very natural bend in the rubber hose.
I have two complaints:I want a black color and the BoltM6×30mm is too short to install on the MASTERCylinder. It is not impossible to install the bolt, but it is necessary to replace it with M6×35mm bolt. (The photo is before replacement).
The color is simply my taste, but I have reduced one star because of the short Bolt.
View detail
Fits: HONDA FORZA, SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR650F, HONDA CBR1000RR, HONDA CB650F, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA HORNET900
Vibration reduction effect is only temporary
Mounted on CT110 HUNTER CUB JA55.
I was hoping for a vibration reduction effect, but I think it is only a comforting effect.
I chose Matte Black and it has no Habit and the texture is very nice.
View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR1100, KAWASAKI ZRX400II, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100 RS
Posh Blinker is the best!
I changed from Plating to Black. It was not so difficult to install. I am very satisfied with the installation, but it has improved my parenthesis a lot. View detail
For off-road motorcycle Mirror Hole Plug
Used for Mirror Hole Plug for off-road motorcycle.
I often remove Mirror when participating in Races, etc., and wanted to prevent mud, etc., from clogging it.
There are many inexpensive Color line nap products, so it would be useful to have a few.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11
The FrontSprocketッs easier to clean and has a better texture.
Cleaning around the front sprocket is easier and always cleanable.
Texture and Cost performance are good.
View detail
subtle
I replaced the blinker of my CB400SB with LED about 3 years ago, but it broke recently. I don't want to use Large Land's product, so I have no choice but to buy this product for my CB400 blinker relay. I would like you to make it more durable. View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Totally Match.
Match the Black/Silver body for a clean look.
The weight is a little heavier and although I haven't driven long distances, the vibration is reduced and it feels good!
View detail
![[Bar End Repair Parts] Solid Bar End Rubber S](https://img.webike-cdn.net/catalogue/images/22383/031177-71_01_TS.jpg)
the expendables
To be honest, it is just a Rubber, but without it, the Handlebar End cannot be installed.
And once the Bar End is installed, this Rubber part is crushed and fixed, so the Rubber is deformed once it is installed. Therefore, it is practically not reusable. When I reused a Bar End before, only one Bar End fell off and went missing, and I had to repurchase the whole Bar End.
Since then, we always replace the rubber with a new one.
At least, we are selling Rubber Only, Washer Only, and Repair PartsSingle Body.
View detail
![[Bar End Repair Parts] Flat Washer](https://img.webike-cdn.net/catalogue/images/22383/031076-72_01_TS.jpg)
Just a Washer.
It's just Washer.
It is just a Washer with 22mm OD, M6 hole, 1.6mm thickness.
I said it twice because it is a Large thing.
We had no choice but to purchase the Bar End because the part in question, which had been stocked, had gone missing.
It may seem that Large is sturdy without it, but in fact, if it is not installed, the Bar End may easily fall off, cannot be firmly fixed, or may interfere with the Throttle.
So it is practically an indispensable component.
It's just a Washer. (Lol)
Considering the price, if you have the time, it is much cheaper to buy the same Size at Home center.
I didn't have Timing to go buy it, so I bought it on webike.
View detail