Reviews
![ZVM-X SeriesChain 520ZVM-X Black [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/86453/0712_520ZVM-X_BLACK_TS.jpg)
Fits: KAWASAKI KLR650, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, YAMAHA XJR400R, YAMAHA TZR250, YAMAHA MT-25, SUZUKI GS500, SUZUKI DR800S, YAMAHA YZF-R3, YAMAHA DIVERSION400, SUZUKI DR600, SUZUKI DR650 SE, SUZUKI DR750, KTM RC390
Conversion to 520
Conversion from 530 to 520 was done. It is now easier to push and move. View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, SUZUKI GLADIUS650 SFV650, SUZUKI V-STROM650, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650, SUZUKI GS500F, SUZUKI GS500, SUZUKI DR800S, SUZUKI DR750S, SUZUKI DR650SE, SUZUKI DR600S, YAMAHA YZF-R3A
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
Fits: KAWASAKI KLR650, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, YAMAHA XJR400R, YAMAHA TZR250, YAMAHA MT-25, SUZUKI GS500, SUZUKI DR800S, YAMAHA YZF-R3, YAMAHA DIVERSION400, SUZUKI DR600, SUZUKI DR650 SE, SUZUKI DR750, KTM RC390
I'm lighter
I can now move it lightly when I push it. View detail
![Motorcycle Chain 520 Size Standard [Caulking Joint Included]](https://img.webike-cdn.net/catalogue/images/87737/standard_TS.JPG)
Fits: DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC, HONDA XL500R, HONDA XR350R, HONDA XR500R, HONDA XRX200R, HUSQVARNA TC610, KAWASAKI KL250 A, KAWASAKI KL250 C, KAWASAKI KLX230, KAWASAKI KLX300R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KTM 125 EXC SIXDAYS, KTM 250 GS, KTM 250 XC-W
Cost-effective
Replaced with SUNSTAR Chain after 15,000 km as the OEM Chain had outgrown it.
The front and rear Sprockets were also replaced with Kawasaki OEM at the same time.
The effect of replacing the Chain, which had been fully extended, is that it is able to transmit power very smoothly.
We recommend this product as it is more cost-effective than other companies' ChainManufacturer products.
View detail
Fits: APRILIA RSV4, APRILIA RSV4 Factory R, APRILIA RSV4 R 1000, APRILIA TUONO V4, BMW G450X, HUSQVARNA FE250, KTM 250 EXC-F, KTM 250 SX-F, KTM 250 XC-F, KTM 250 XC-F, KTM 250XC-FW, KTM 450 SMR, KTM 450 SX-F, MV AGUSTA F4AGO, MV AGUSTA F4S, MV AGUSTA F4SPR, MV AGUSTA F4 Senna, MV AGUSTA F4 Serie Oro, MV AGUSTA Brutale S, MV AGUSTA Brutale Serie Oro
Reliable
I use it on my Kawasaki Jet ski.
I'm replacing it at the same time as Oil, so as much as possible.
The lower price would be more helpful.
I feel safe in purchasing this product.
View detail
![ZVM-X Series Chain 520ZVM-X Gold [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/86453/0523_520ZVM-X_G&G_P_togo_TS.jpg)
Fits: KAWASAKI KLX650SR, YAMAHA MT03, YAMAHA YZF-R3, HONDA Rebel300, HONDA CB500X, HONDA CB500F, HONDA CBR500R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, HONDA NC750S, HONDA NC750S, HONDA 400X, HONDA 400X, HONDA CB400F, HONDA CBR400R
Chain replacement
Since the Front and Rear Sprocket were replaced, the Sprocket was also replaced.
I had been using D.I.D.'s VX, but this time I decided to go with the high-grade ZVM-X.
OEM is 114 LINK, but we purchased 120 LINK and will pack Piece.
Chain Cut & Crimp tool is used for press fitting and crimping.
Plate was measured and adjusted with Caliper.
The ZVM-X has a pin length of 21.1mm, while the VX we have been using has a pin length of 18.7mm.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Z250, KAWASAKI Z650, HONDA 400X, HONDA CB400F
Conversion of Zr-7 from 525 to 520
Conversion of Zr-7 from 525 to 520.
Daido's ZVM-XSeries was selected for its durability.
We raised the FrontSprocket by 1T, so we increased it by 2 LINKs from OEM to 108L.
Not surprisingly, it is narrower and weighs less than the 525.
It is a calm Gold color, so it looks more luxurious than flashy.
View detail
![Hanshin Tigers Collaboration Chain Gold & Black [Caulked (ZJ) Joint Included]](https://img.webike-cdn.net/catalogue/images/108868/525tiger_G&B_P_togo+C_TS.jpg)
Fits: APRILIA Caponord 11-16, APRILIA DORSODURO 750 Factory, APRILIA ETV1000 CAPONORD, APRILIA MANA850, APRILIA PEGASO 2 93-96, APRILIA PEGASO 3 97-00, APRILIA PEGASO 90-91, APRILIA PEGASO ie 01-04, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL 07, APRILIA RST1000 FUTURA, APRILIA RSV1000, APRILIA RSV1000R DREAM 04-05, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV4 R ( FACTORY ) 09, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF / RR 15-16
Hanshin TigersJapan Ichi!
Hanshin TigersJapan's first in 38 years!
Purchase supplies at discount Timing.
View detail
Fits: YAMAHA MT-25, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, KAWASAKI KLR650, YAMAHA XJR400R, YAMAHA TZR250, HONDA NM4-02, HONDA NV400, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel 500, HONDA SLR650 VIGOR
Chain is also finished in Black and looks good.
[How is it used?
The previous version was gold, but this time it is black and the finish looks good.
Was the one you received as per Image?
Street Image
Was the installation difficult?
The installation was done at the store.
How was your experience with it?
It is not stretchy and good.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
![VR46 Series Chain 520VR / 46 Silver & Gold [Caulk (ZJ) Joint Included]](https://img.webike-cdn.net/catalogue/images/89180/520VR_46_1_TS.jpg)
Fits: MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, KAWASAKI KLR650, YAMAHA XJR400R, YAMAHA TZR250, YAMAHA MT-25, KAWASAKI KLR650, KAWASAKI KLE500, KAWASAKI KLE500, KAWASAKI KLE400, KAWASAKI KL600R, KAWASAKI GPz500, KAWASAKI GPZ500, KAWASAKI GPz400S, KAWASAKI GPz400R, KAWASAKI GPz400F/F2, KAWASAKI GPz400
Fast delivery and good product
Delivery arrived quickly
The product looks good too. I bought it much cheaper than buying it domestically, and I think it's good that I can order in detail.
Please continue to supply good products at low prices.
I want to install it quickly. I'm looking forward to seeing what the driving quality will be like --------------------------------------- ------------------- Delivery arrived quickly The product looks good. Please provide a lot of good products inexpensive in the future I want to install it quickly. Powered by Google Translator
View detail
Fits: APRILIA Caponord 11-16, APRILIA DORSODURO 750 Factory, APRILIA ETV1000 CAPONORD, APRILIA MANA850, APRILIA PEGASO 2 93-96, APRILIA PEGASO 3 97-00, APRILIA PEGASO 90-91, APRILIA PEGASO ie 01-04, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL 07, APRILIA RST1000 FUTURA, APRILIA RSV1000, APRILIA RSV1000R DREAM 04-05, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV1000R FACTORY, APRILIA RSV4 R ( FACTORY ) 09, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF / RR 15-16
"ARE" Prayer ?
I was looking for other collaboration projects since there was an Evangelion collaboration product, and I found it ? 《Hanshin Tigers collaboration product》, a gold chain with a black mark in a subtle design, I want to replace it before Touring." 2) Praying for victory before we win the league championship yet. It was cheaper!" The number of LINK is 120 and a little long. I also bought Kashimaru-kun with the same product, and I thought I could practice Pin removal with a longer Chain.
Chain is in overall oiled conditionIncluded Parts:. (Chain connection parts and Grease) and comes with a not-for-sale Sticker of the Hanshin Tigers! All that's left is "Kashimarimono" The included grease was sufficient for the replacement and installation work! The included grease was sufficient and the Vinyl bag prevented the chips from sticking when removing the Chain Pin. Remove it from the bag after the work. The remaining items to be checked are (1) Chain life. (2) Hanshin Tigers' Japan Ichi.
When I showed this Chain to my touring friends, they were laughing so hard.
View detail
Fits: KAWASAKI KLX650SR, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, KAWASAKI Ninja ZX-6R (ZX636), HONDA NM4-01, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X LD, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S, HONDA NC750S
lool nice and strong
I repalced DID 520ZVM-X gold joint link for black on my Suzuki Hayabusa 1300R. With the DID KM500R toolkit, it took me about 30 minutes to complete, it look nice and strong. View detail
![ZVM-X Series Chain 520ZVM-X Silver [with Riveting (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/86453/0523_520ZVM-X_S&S_P_togo_TS.jpg)
Fits: HONDA 400X, HONDA CBR400R, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Z250, KAWASAKI Z650, HONDA 400X, HONDA CB400F
Manufacturer for Peace of Mind
After purchasing it here, I had it replaced at a Motorcycle shop nearby. The last time I replaced it, it lasted about 27,000 km on a VX3 of the same manufacturer with a top ranking. We know from the last Chain that the silver plating of this Manufacturer is solid. Black and gold chains seem to be in fashion these days, but silver plating is more suitable for a motorcycle that is closer to the classic style. I would like to break in the new Chain until the initial elongation after the replacement. View detail
Fits: YAMAHA MT-25, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, KAWASAKI KLR650, YAMAHA XJR400R, YAMAHA TZR250, HONDA NM4-02, HONDA NV400, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel 500, HONDA SLR650 VIGOR
ligh weight, durable, strong
I ordered a 520 conversion kit for my Hayabusa 1300R which include DID ZVM-X chain 520 with 116 link (stoch with 530 with 106 link). DID ZVM-X chain 520 has ligh weight compared to 530 stock but still strong enough, full kit include DID 520 ZVM-X chain, front and rear sprocket weight only about 2.5kg, I think I've lost 50 percent of the weight. View detail
Fits: bimota DB6 DELIRIO 06-07, bimota DB1, YAMAHA YZF-R3, YAMAHA DIVERSION400, YAMAHA YZF-R25, YAMAHA XTZ750 SUPERTENERE, YAMAHA XT660R, YAMAHA XT600Z TENERE, YAMAHA XT600Z TENERE, YAMAHA XT600Z TENERE, YAMAHA XT600Z TENERE, YAMAHA XT500, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6N, YAMAHA XJ6
Chain RossiMODEL
I bought it because I liked the Parenthesis color scheme of the Chain.
Outer is Silver and Inner is Gold is very cool!
However, it is a little disappointing that the LINK is a fluorescent yellow color. (It may be because it is RossiMODEL) I bought Silver LINK separately because I felt
View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, HONDA Rebel300, YAMAHA MT03, HONDA CBR500R, HONDA CB500F, HONDA CB500X, KTM RC390, KTM RC250, KTM RC125, KTM RC125, KTM 690 SMR, KTM 690 SMC
Mounted on CB500X. I recommend it.
There is an excessive feeling compared to the performance of the owned two-wheeled vehicle, but I have installed it for the sake of friction resistance and durability. I rode it for about 30,000 km after installing it, but I think I can easily endure 20,000 km in the future, perhaps because I often rubricate and manage it. Very satisfied. DID the best! -------------------------------------------------- -------- There is an excessive sense of the performance of the mirror, but I have been equipped with friction resistance and durability. I put it on it and ride about 30000 kilometers, but I often manage it and managed it so I could hold it more than 20,000 kilos in the future. Very satisfied. DID best! Powered by Google Translator View detail
Fits: MV AGUSTA F4 1000S, MV AGUSTA F4-750, MV AGUSTA F4-BRUTALE [Brutale]., MV AGUSTA F4 1000AGO, MV AGUSTA F4 TAMBURINI, MV AGUSTA f4 brutale910s [brutale]., MV AGUSTA f4 brutale 910r [brutale]., MV AGUSTA F4 1000R, MV AGUSTA F4 1000S SPR, MV AGUSTA F4 SerieORO [SerieORO]., MV AGUSTA F4 RR1078, MV AGUSTA F4 1000R312, MV AGUSTA F4S, MV AGUSTA F4SPR, MV AGUSTA F4R, MV AGUSTA F4 SENNA [SENNA]., MV AGUSTA F4 1000S, MV AGUSTA F4-750, MV AGUSTA F4-BRUTALE [Brutale]., MV AGUSTA F4 1000AGO
AGUSTA
It clearly conducts less heat than the OEM Aluminum. Good purchase for the hotter months ahead. View detail
Fits: YAMAHA MT-25, bimota DB5, MV AGUSTA BRUTALE675, DUCATI scrambler, DUCATI 959Panigale, DUCATI 899Panigale, DUCATI 750F1, DUCATI 750F1, DUCATI 750F1, KAWASAKI KLR650, YAMAHA XJR400R, YAMAHA TZR250, HONDA NM4-02, HONDA NV400, HONDA NX650DOMINATOR, HONDA NX650DOMINATOR, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel 500, HONDA SLR650 VIGOR
Accompanied by cornvert.
Changed from OEMSprocket to Conversion as well.
Black texture is very good.
Unlike the Package, the inside is only rust-proofed.
Well, it doesn't bother me that much if I don't pay attention.
As for durability, how far will Sprocket and I be able to go from now on?
I wonder if they will keep it.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Z250, KAWASAKI Z650, HONDA 400X, HONDA CB400F
So much classier than Gold!
[How is it used?
I used it on my MainMotorcycle XJR1300C.
This time, we chose 520ZVM-X since we converted to 520Size.
Compatible Engine Displacement Volume is up to 1200cc, but is it Large sturdy? Well, I don't think it is a problem.
I used the same Chain when I was riding CBR1000RRFull power, which has more Power and Torque than XJR.
Chain is designed for strength with a large margin, so it can be used without problems.
I'm sure that NORMAL XJR is a piece of cake.
Front sprocket is SUNSTAR's Item number:395-18
The Rear Sprocket is the ISA's Y-23-40.
Chain link count can be installed with 112 LINKs. This makes Final almost the same as OEM.
It will be just a little bit long, so it's up to you.
Was the one you received as per Image?
Silver plating as per Image?
All the plates are properly plated both on the back and the front.
The DID BlackChain was rejected because it has Black Painting only where it can be seen, and the inside of the Plate is Steel rounded out.
Was the installation difficult?
Chain replacement is not difficult at all with Kashimaru-kun.
How was your experience with it?
The Chain DID run more than 100 km, but it is a good Chain with almost no initial elongation.
[Included Parts:were they on?
Rivet Joint and assembly grease are included.
The new Chain was always sticky with Grease, but the Grease was much less.
This is good because I no longer have to scrub and wipe. The included Grease looks a little different too.
[Was there anything that disappointed you?
The 530 Size and 525 Size are now available in the ZVM-X2 New Model, while the 530 Size and 525 Size are available in the ZVM-X2 New Model.
Why is there no new model for 520Size, Mr. Daido?
I'll be waiting in anticipation.
View detail
Fits: KTM 690 DUKE, KTM 600 INCAS, KTM 600 ER, KTM 500 EXC SIXDAYS, KTM 500 EXC, KTM 350 GS, KTM 300 XC-W, KTM 300 EXC ENDURO, KTM 125 EXC SIXDAYS, KTM 250 GS, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, SUZUKI GSR250, YAMAHA WR200R, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC
It was easy to do.
The instructions on the box were easy to understand and I didn't have any hesitation in doing it even though it was my first time to replace the Chain! View detail