Reviews
In fact, although it was a five stars, there was a problem. Although surely vibration etc. were lost although there were a remarkable vibration etc. with a Chinese engine, and I thought good goods, the direction of the attached hexagon-head screw had
In fact, although it was a five stars, there was a problem.
Although surely vibration etc. were lost although there were a remarkable vibration etc. with a Chinese engine, and I thought good goods, the direction of the attached hexagon-head screw had long die length about 10 mm, and fixation was not completed.
Since excessive money was applied, for the reason are a home center etc., I did purchase only for the hexagon-head screw, and I did exchange, but the screw head did not enter with the screw of the same thickness (in the case of stainless one), it is in the state which said the steel screw too that rust comes out of the head of a screw although purchase was done again.
View detail
06 It attached to the bandit 1200S. He plans to unite with the gold color of a wheel, and it chose gold. I think that it is an accent good for a body taken over by black. It is very pleasing. The intermediate was chosen by Schopp's recomme
06 It attached to the bandit 1200S.
He plans to unite with the gold color of a wheel, and it chose gold.
I think that it is an accent good for a body taken over by black.
It is very pleasing.
The intermediate was chosen by Schopp's recommend that probably it is probably the closest to a pure position.
It seems that the device was slightly required to set so that it may interfere in neither a cowl nor a tank although I asked you also for attachment by Schopp.
Specifically, the degree of setting angle of the right switch box is set a little downward from normal.
It seems that the root of the throttle cable ? will interfere in a cowl if it does not carry out like this.
It is interfered and set to the product cowl and the tank.
Although there is no big change about a position, I think that handle width became large.
Moreover, because handle width became large, it does not understand probably because of an iris diaphragm angle, but although it is some, it is thought that the handle became far.
As the whole, it is satisfied.
View detail
The handle of the zoomer (ruckus) was exchanged. Does a pure twist position fall? Since width also became somewhat narrow, it became easy to come out of the door of the parking area of an apartment. Structure is a beauty truly. 笙ｪ which I
The handle of the zoomer (ruckus) was exchanged.
Does a pure twist position fall?
Since width also became somewhat narrow, it became easy to come out of the door of the parking area of an apartment.
Structure is a beauty truly.
笙ｪ which I regard as the degree of dress-up up increasing if an optional bar end cap is also attached
View detail
Since the attached bar end of the product made from a plastic was cheaper when the handle of Ninja 250R was changed to the sports handle of PENSKE, while searching with whether there is nothing good in anything, this bar weight stood out. O Good place
Since the attached bar end of the product made from a plastic was cheaper when the handle of Ninja 250R was changed to the sports handle of PENSKE, while searching with whether there is nothing good in anything, this bar weight stood out.
O Good place O1 If grip end has separated, it can equip really easily.
(if there is only a 6 angle wrench) The vibration from about 2 80 K was eased.
3 Correspond to both 14 mm in inside diameter, and 18 mm.
4 The pure twist is also self-asserted nonchalantly and is good.
5 Weight has become comparatively for 2 minutes and is made to a favorite weight.
O Not quite satisfactory place O1 There is no color suitable for the car body of lime green.
(Although gold was used, by itself, it is pleasing) 2 It is the highest when cheap to a slight degree.
3 I wish and I can choose what of a portion is big to a slight degree.
Since it just strains itself and searched although the not quite satisfactory point was also got, overall points are satisfying parts of about 95 points.
View detail
It attached to CB. Since the handle itself is made into the up type a little, it attaches and appearance changes. Since it is the easiest to stand out when Rider (gold is put in if a handle is black) who thinks that it is good also in balance to c
It attached to CB.
Since the handle itself is made into the up type a little, it attaches and appearance changes.
Since it is the easiest to stand out when Rider (gold is put in if a handle is black) who thinks that it is good also in balance to construct the color of a handle and a different color and who has ridden looks at a meter, it becomes fine somehow. Smile
View detail
In my case, it purchased for the purpose of the dress-up up. It is said that these goods have an effect in the vibration proof and rigid up of a handle although the degree of satisfaction of the dress-up up was very high. Surely, when changing bar
In my case, it purchased for the purpose of the dress-up up.
It is said that these goods have an effect in the vibration proof and rigid up of a handle although the degree of satisfaction of the dress-up up was very high.
Surely, when changing bar end into the type in which a pure twist is [ about 2/3 ] also light, although it was not like [ which feels numbness ], fine vibration increased.
Although these goods were attached after that, it realized that rode and fine vibration was reduced.
Since he did not want to put a crack into a handle about attachment when it could do, I am recuperating myself by the cutting sheet so that it may not be conspicuous inside a clamp.
It was performed with JIWARIJIWARI by turns, a fasten lump also putting in positioning.
A place with least ASOBI on either side is a good point.
If it does like this and sees, the impression of raw (cause) will be received, so that a color is intense only for a color.
View detail
The low type was attached to the vario A1. Since what was considered first is aluminum, it is dramatically light! The touch which it had by hand is felt for about 1/3 pure weight. Although it fell twice after exchange, there is likely to be no sag
The low type was attached to the vario A1.
Since what was considered first is aluminum, it is dramatically light! The touch which it had by hand is felt for about 1/3 pure weight.
Although it fell twice after exchange, there is likely to be no sag in particular and rigidity does not seem to have a problem, either.
although it is a wire, if it cuts to the limit, it will come out and will pull some clutches.
A brake is also a level which is not worried if it will stretch if Faulk is extended, but it does not care about both.
Others in particular are satisfactory.
A position hardly changes.
Isn't it best to those who want to change a style by a position as it is?
View detail
08 XR230 motard was equipped. since it is pure and is as the handle ON of a renthal, handle exchange is carried out -- since it made a selling point of the brace bar single article although he thought that it was wasteful -- Bar -- purchase. A siz
08 XR230 motard was equipped.
since it is pure and is as the handle ON of a renthal, handle exchange is carried out -- since it made a selling point of the brace bar single article although he thought that it was wasteful -- Bar -- purchase.
A size thinks that favorite MONO is found in most motorcycles since the 7-color lineup also of three kinds and the color is carried out.
Attachment is also easy and it only fastened the location on 6 in all squares.
It is in the state which shakiness does not have after wearing and became brave.
In a meaning called rigid UP of a handle, although I seldom feel a difference, I think that I am preeminent as a visual-sense effect.
I think that it is cheap and they are good parts in which wearing simplicity and appearance also become tight.
View detail
V-MAX was equipped in accordance with grip exchange. In free bar end, since it was dull, the weight type was looked for for the purpose of oscillating mitigation, but the reason decided to be this is because it can use for both aluminum and iron.
V-MAX was equipped in accordance with grip exchange.
In free bar end, since it was dull, the weight type was looked for for the purpose of oscillating mitigation, but the reason decided to be this is because it can use for both aluminum and iron.
And I also think that setting-out weight is heavier than the equivalent product of the other company, and the charm of this product can adjust three patterns to its favorite weight since it is a division type.
Although it is an effect of a product, it is thought that vibration in a low rotation region (about 3000 rpm) is decreasing.
Since the grip is also simultaneously changed into the thing containing a gel, it is not in play [ exact ], but I think that it is effective.
however, there is no effect until it denies thoroughly to the fine vibration at the time of vibration and idling of high rotation too as a reason for five stars not coming out.
I think that a single engine and a vehicle type with much vibration like 2st can be felt more.
But it is very well pleasing not only an effect but in design as me.
View detail
CB1300SB (2007 type) was equipped. It is blue. There was not necessarily especially vibration of a handle, and he thought whether to be easy to attach camera mount etc. with having wanted the accent in the future, and it only equipped the circumfe
CB1300SB (2007 type) was equipped.
It is blue.
There was not necessarily especially vibration of a handle, and he thought whether to be easy to attach camera mount etc. with having wanted the accent in the future, and it only equipped the circumference of a handle.
Attachment was attached that there is no problem comparatively [ general-purpose ].
Since a price is also handy and the degree of dress-up up is also so so, can he recommend?
View detail
The ape which carried out bore up to 125 cc was equipped. Since bore up was carried out, also in the idling condition, vibration is severe and the mirror always blurred, and in the run, it was like [ into which the stay of a blinker breaks with vibrat
The ape which carried out bore up to 125 cc was equipped.
Since bore up was carried out, also in the idling condition, vibration is severe and the mirror always blurred, and in the run, it was like [ into which the stay of a blinker breaks with vibration ].
It stopped almost worrying the vibration in the time of idling, after equipping with bar weight.
A little oscillating buffering effect under run is called kana ? which became Massey.
Since it became a dress-up up in addition to an oscillating buffer, it was a case of killing two birds with one stone.
It will be easy to equip, if grease etc. are applied to a ring about wearing since a rubber ring may be unable to enter easily depending on a handle.
Since it was the goods as expected, it is a five stars.
View detail
Although it has ridden on 08 models of XJR1300, Since the hand might be numbed at a fixed speed when little run of a posture change was carried out when traffic congestion and late Kuruma were followed, Since any dissatisfaction could not be found
Although it has ridden on 08 models of XJR1300,
Since the hand might be numbed at a fixed speed when little run of a posture change was carried out when traffic congestion and late Kuruma were followed,
Since any dissatisfaction could not be found in the position of the normal which carried out handle exchange, looked for the size near normal as much as possible, and made it Hardy's LOW, but.
The result of the intermediate (one bar end grade) to which it became low a little and width became narrow a little may be closer to the height of normal.
Since the rear shock was an ohlins, XJR purchased gold in order to balance appearance for the color of a handle together with Kin of a shock.
They are a tank of a rear shock, and a fairly close color.
In the touch which rode, change with normal is not felt almost about the position of a handle.
being related with vibration of the original purpose -- it is -- although -- I feel that it decreased... it is a grade.
From the difference in a raw material, I think that the handle brace is reducing vibration.
Although oscillating mitigation purchased for the purpose, now, the balance of the color by the handle having become golden is pleasing.
View detail
It purchased simultaneously with Hardy's road bar currently used for XJR1300. Although the bar end currently attached to the pure handle was removed at the time of handle exchange, pure bar end also has a weight very well, and there was weight to the
It purchased simultaneously with Hardy's road bar currently used for XJR1300.
Although the bar end currently attached to the pure handle was removed at the time of handle exchange, pure bar end also has a weight very well, and there was weight to the extent that it is not different from this product.
I think that an effect does not show up since heaviness does not so much change even if it exchanges for pure bar end with a normal handle.
I think this time that the parts as for which an external handle is made to the same conditions as a pure handle will be places if it sees in a weight since it is attachment to Hardy's road bar.
Since the quantity of weight was changed, all the patterns were tried, but since a difference is not known well, it has attached now [ all ].
Those who worry about the external handle at the numbness of the hand by vibration think that the way purchased after weighing the bar end of normal, when it attached to a normal handle, although I thought that they were parts which are worth trying does not go wrong.
View detail
It attached to KSR110. It comes to be lower than the time of normal by a handful, and becomes easy to turn at a curve.
It attached to KSR110.
It comes to be lower than the time of normal by a handful, and becomes easy to turn at a curve.
View detail
D trucker is equipped. Touch with the sufficient gouge marks also in texture of the machine cut by which cutting appearance was carried out. Although purchased as dress-up parts, it felt that the rigid feeling appeared in the handle itself by atta
D trucker is equipped.
Touch with the sufficient gouge marks also in texture of the machine cut by which cutting appearance was carried out.
Although purchased as dress-up parts, it felt that the rigid feeling appeared in the handle itself by attaching this brace, and vibration which gets across to a hand became hard.
(He was able to realize that the handle has bent until now) Requiring special attention, since it will be easy to come out of flake rust if it uses weather-beaten for the aluminum raw material.
Although it saw if the brace was attached, when it (?) Fell over to the trial, it was as usual that it was easy to turn at the aluminum handle of a hardy.
In order to attach brace guard sponge behind, it exchanged for the thin brace made from a renthal.
Although it is recommended from a renthal as dress-up parts alone, considering practical use, + guard sponge, such as a renthal, is impressions [ recommend / we / you ].
View detail
KSR is pure -- looking for what is somewhat low and has width, it was made this. Since there is also no necessity of carrying out a drilling process and it was just made the position as expected by bolt-on when it was KSR, it is quite satisfactory.
KSR is pure -- looking for what is somewhat low and has width, it was made this.
Since there is also no necessity of carrying out a drilling process and it was just made the position as expected by bolt-on when it was KSR, it is quite satisfactory.
Probably, it is an unavoidable place, since it is aluminum, although it is easy to bend if a fault becomes hollow.
Isn't it good for those whose handle for mini bikes is too narrow?
View detail
The second time bought this handle brace this time. About the medium of gold, it is purchase before and is the red of long this time. An effect thinks that the handle blur by a high speed will probably be improved by it this time also since it was
The second time bought this handle brace this time.
About the medium of gold, it is purchase before and is the red of long this time.
An effect thinks that the handle blur by a high speed will probably be improved by it this time also since it was a high impression when it is used last time.
However, although a brace is red, if it arrives at hand, isn't a color made into a deep pink and red real [ why ] rather than red?
View detail
It exchanged for the pure handle of YAMAHA Zeal250. He is pleased although the place where the handle brace is attached is a place where liking divides. Like a photograph (I think that it understands well if distance with the end of a meter is com
It exchanged for the pure handle of YAMAHA Zeal250.
He is pleased although the place where the handle brace is attached is a place where liking divides.
Like a photograph (I think that it understands well if distance with the end of a meter is compared), a handle comes to come to quite this side, and it can operate now by an easy position.
View detail
Bar end was exchanged to compensate for having exchanged handles. Since it was disagreeable that a hand was numbed with vibration of a handle, it equipped with the bar end of Hardy who states the earthquake-proof buffer. It has equipped with weigh
Bar end was exchanged to compensate for having exchanged handles.
Since it was disagreeable that a hand was numbed with vibration of a handle, it equipped with the bar end of Hardy who states the earthquake-proof buffer.
It has equipped with weight with the composition of the heaviest state (161g) of No. 1 of the catalogue which also has this in Mr. Webike's goods page for earthquake-proof.
From the first, although it is a motorcycle with little vibration, there is also no vibration and a hand is not numbed at all.
Although I thought that there was also a cause of anteversion at a little time of a pure handle, the hand might be numbed, but there is also no numbness of a hand, there is also a cause of an up handle, and it is dramatically comfortable.
I think that vibration is decreasing at least more certainly than pure bar end since a hand was not still numbed after attaching this bar end.
Whether it is good how and when [ although weight is not understood, ] it is me, it is satisfactorily good also to management also in the present heaviest state.
View detail
It has attached to GSR400. It is practical although there is also an accent of appearance. In my case, the handle mount bag of the rough & road is attached on handle blues. Since this motorcycle does not have storage, it is a recommend! Even i
It has attached to GSR400.
It is practical although there is also an accent of appearance.
In my case, the handle mount bag of the rough & road is attached on handle blues.
Since this motorcycle does not have storage, it is a recommend! Even if it does not attach a bag, Good! can also attach a drink holder and various things.
View detail