Reviews
I bought it to prevent scratches.
I bought this to prevent scratches. The shape is Exactly like Motorcycle. View detail
Cannot be installed on OEMHarness
In conclusion, it cannot be installed.
It is listed as a YZF-R1 15-19 fitment, and is claimed to be for the OEM harness and ECU.
If you buy this bracket, you can't install it on the OEM Normal harness or ECU.
Specifically, this bracket requires the ECU to be installed in the Up position.
The OEMHarness is absolutely not long enough and can only be mounted horizontally.
In addition, it interferes firmly with Side cowl when it is installed sideways forcibly with Tie Wrap etc., and it is not possible to use it.
Cowl installation becomes almost impossible, and worst of all, it cracks. The Cowl surface cracked for me.
I've inquired about it, and as I suspected, you've had similar communications in the past.
"You can't use it in OEM mode and it's not recommended. If you do use it, remove the Tank, undo all the Harness, and stretch it out." They seem to be guided by the
Sure, that might be possible, but in that case, it should be stated in the description as a prerequisite, and
I feel that this is far from a guarantee of conformity in Webike.
What the heck does the product name "For OEMHarness" mean?
However, if you are considering to install CW's Race cowl on a NORMAL vehicle, it is better not to do so.
I honestly feel like I've been scammed.
As long as this Bracket problem is not solved, I can't even use my expensive Cowl properly lol.
Above all, I think that it is very problematic that even though there was a similar inquiry in the past, not only has it not been improved, but not even a warning note has been included.
View detail
Ideal for preventing tank abrasion Wound
[How is it used?
The Tank Pad of the small size was pasted at the time of the delivery of the car, but because the protection range was narrow and the rubbing Wound with clothes came to stand out, I bought the commodity of this here which covers more widely.
Was the one you received as per Image?
The texture was better than the Image.
I was a little worried until the product arrived because of the low price, but the actual product was a beautiful fold of Carbon and betrayed my expectations in a good way.
Was the installation difficult?
It's very easy to remove the Seat and apply it with Double-sided Tape.
How was your experience with it?
Very good
The shape also Exactly fits the Tank.
The conspicuous Wound is hidden and almost invisible, and it looks cool.
If I had purchased this product from the beginning, I would not have had to wear Wound on Tank.
[Included Parts:were they on?
This is a stick-on product and comes with a detailed Instruction Manual.
Double-sided tape also came with a lot of pre-cut stuff, and I had some left over.
[Was there anything that disappointed you?
None
View detail
ExactlyFit
It was Exactly, with no distortion!
The two sides that came with it were decent, and it was worth the wait for delivery!
View detail
Fits: KAWASAKI Z800, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000 SX, KAWASAKI Z1000
Wet carbon.
The design is good, not too much, but it's not dry carbon, it's wet carbon. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Practicality and appearance Up!
I used Tank Pad with Logo before, but I bought it so that Wound would not be attached to Tank by the interference of the hem of Fastener and the interference of the part which opened the lower part of Double zipper when I wore a long Jacket in winter. I was able to put it on without feeling uncomfortable because the basic shape is the same as the Chinese Cowl. I'm very happy with it, and I hope it's a little cheaper for my wallet; View detail
That's what I'm talking about!
CLEVERWOLF's Carbon frame cover.
I've been waiting for you!
Texture, strength, design, and security… all as expected...
View detail
Good !
It has a fast production period and good quality. I really like it. The twill keybone pattern is really pretty. And it's better because there's also a Clever Wool engraving. Thank you. View detail
To improve serviceability.
Since the other Cowl Fastener was not a D-Ring, I purchased the D-ring Fastener from CLEVERWOLF for improved serviceability.
As a result, it was not possible to use the Fastener because the diameter of the Fastener of the original cowl of other companies was larger than the Quick fastener that was purchased this time.
It turns out that it is rattling, and was informed here that there was size in Quick fastener, it was not able to use, but it is a good learning experience.
View detail
As for Repair, I recommend it
I bought it for the Repair of Race cowl for Saitaniya R25
But Size seems to be small and it was not usable for the Cowl of Saitaniya
I think it can be used for any manufacturer's cowl if the size is right
You should check the Size before you buy
View detail
It's like an 8-resistant Spec. and I'm impressed!
I purchased this for a durable cowl after my OEM Cowl cracked
I was going to paint it myself, but I sent it to a painter to get it cleaned up It was
The exit part of the Exhaust System is Yoshimurafull Exhaust This is the system that needs to be modified including OEM products Because Mr. Lever's Fitting car did not have the Horn, we had to make the Horn part too Escape processing required The rest of the body fits well, and the maintenance with the Cowl off is thanks to the Quick fastener It's easier
Painting is done by KingsCostomPaint, who is working on the cars for TeamKagayama We asked the owner to make it a Replica painting Of course, I got permission from Yukiomi Kagayama, the owner, and made it as an official Replica I received it
The sense of ownership has increased by 100 percent over the OEM Black and I've spent more time in Garage
Wiring of the Het Light will light up if it is attached as it is
Please consult with Bright logic for more information and see what they have to say
View detail
It was a pain in the ass to put up, but it's a classy look
Cool! It took a little bit of work to get it up, but it worked
the hang is to apply the double-sided tape firmly If you don't stick it firmly, the double-sided tape will come off from the original This is the pattern of the "I'm not sure if it's a good idea to use it, but it's a good idea to press down firmly If you don't do this, both sides will become Garbage in the blink of an eye The Tank shape is complicated, so make sure you're prepared! The accuracy is perfect
View detail
Perfect for dress-up & scratch protection
CW's Tank protector in general is solid, not flimsy
It seems to be resistant to UV degradation
Waxing together is still large and durable
The effect is double the customization compared to a normal tank pad
Installation Instruction Manual is also included and friendly
This is one that I would buy if it fits
View detail
Is good
I bought it before
Compared to the same model
It has become Smaller than before
But it's perfectly fine
It's a stable Fit feeling
It's the right one
View detail
Excellent in both appearance and feel
Fastener for Jacket and Pants, Buckle for Belt and HipBack
Purchased to prevent scratches on the tank
I wanted to buy the twill weave, but I didn't have it in stock, so I went with the plain weave …
The more I put it on, the more I like it, so it's a good choice (laughs)
I was able to put it on with good accuracy and Exactly!
No air bubbles, no BALI, no fading, no fading etc
I like the look around the tank because it's carbon and it looks one point tighter !
I don't really care that it's attached at all for use
Of course, scratch prevention is also a must!
It is Smooth without any discomfort when shifting the waist in a corner
Double-sided tape is used for installation
I was wondering if it was weak … but it comes on well with no problem
I don't care about the car wash, etc., but there are no gaps or floats
The installation notes are
The surface to which the tank is attached must be thoroughly degreased
First of all, you need to temporarily fix, adjust the position and fit feeling by Masking etc
I'll mark the outline! (I think it's a Large thing.)
Once the position is fixed, apply it all at once so that there is no floating or distortion
There are many places for Double-sided Tape, so I think it's a little bit of a weird thing to do while making fine adjustments I think it's Large strange
We don't have any plans to make any changes at this time and will continue to use them!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Excellent Fit feeling
I am satisfied with the quality and the costumes
Material of twill weave:Carbon Style is beautiful
Installation is also based on the shape of the tank
Just stick it on, it's so easy
View detail
Design is good!
I was attracted by the design and color and bought it Delivered in less than a minute
I'm happy with the texture as expected
View detail
very good
It's still a fitting battle, but I think you'll be satisfied. I don't think we need to put a tank sticker on. I can't wait to mount it. View detail
Purchase before delivery and install at delivery!
It is Rider over past 50.
Purchase ZrX 1200DAEG 2012 formula in this spring. At the time of vehicle contract "ETC" And OEM "Engine Guard" We ordered with Option.
Now, afterwards "Tank protector (Pad)" We thought we had to prepare by the time of delivery and evaluated on Net (reputation) While checking, Motorcycle Supply Store (2 Rinkans, NAP'S, ROUGH & ROAD) I made a color.
As a result, considering Designality is one thing, (use) Because it was this product that Cover the part rubbed by the other, "Webike" I bought it with.
After placing an order, the goods were delivered without trouble by car delivery date.
Various explanations at delivery on the day of car delivery ? After completing the procedure, we installed this product behind the dealership. Until I installed it was really worried whether I could install Exactly without any gaps, but it was okay!
When installing, first, 1) the back of this document (Adhesive surface with Tank) 2) Masking tape, preliminarily tighten, 3) delicate position adjustment, finally, 4) Double-sided Tape's SEROW peeled off the main finish.
I performed delicate position adjustment and peeled off the SEROW Han of Double-sided Tape and worked carefully as to whether there was a part that is gapped also when I finish it, so it was a satisfactory finish. In addition, because I felt I was unsatisfied with just the attached Tape, I bought a Double-sided Tape (3M) Replaced with. Thinking about this part by individuals (How to feel) I think that is different..
I think that it will be almost almost to replace in the future, but if you need it again I think that I will search and buy this item.
View detail
It is Exactly!
Until the product was installed, I was honestly anxious. When I installed the product, it was exactly well though it was for ZrX 1200 DEG.
I remembered and added only with the enclosed Double-sided Tape, but I do not have any anxiety.
If possible, it will be saved if it is a bit cheaper, but it is difficult (^_-) - ☆
View detail