Reviews
Easy to carry
Convenient to carry, Helmet is fixed, but it is not likely to be able to Cut, so it is safe. View detail
One for each plane to leave evidence in case of an emergency!
It's been about 6 months since I installed it in my first Motorcycle camera, and I think it's taking beautiful pictures.
Depending on the installation method, a separate Band or bar may need to be purchased.
On the REBEL250, the RearCamera is mounted on the License Plate, and I felt that the vibration was large, perhaps due to the single cylinder.
However, I believe this can be solved by carefully considering the mounting location.
It is pricey, but I would feel better if it were installed as evidence in case of emergency.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Don't expect so much.
It was expected that the change would not be too intense.
It is not responsive unless it is quite clear. I wish it was a little more responsive.
The response itself is slower than expected.
Well, this is how it is.
View detail
How about the fact that the Microphone is built into the body?
Purchased because it is the latest MODEL.
I have been using it for about a year and the operation itself is fine.
I enjoy checking videos on my PC using a dedicated application.
However, only the Engine sound is recorded as audio.
Since the Microphone is built into the Body, external sound is drowned out by the Engine sound near the Body, rendering it completely useless.
It will not be possible to record without exposing the Microphone portion (i.e., part of the Body) from the Motorcycle, even if it is not near the Engine.
Microphone can be built into the REMOTE CONTROLLER or completely separate.
Also, I am not surprised that the Camera is not a STARVIS Type, considering the timing of its release.
I try not to drive at night as much as possible because I am a motorcyclist, but I would like to have a camera to monitor parking.
Based on the above, we believe that this product is worthy of comparison with other companies' MODELs.
Finally, it is Good that MistubaBrand's SDCard is on the market.
If the memory is a fake brand product with a short life span, it would be a disaster, even though it is a DriveRecorder for emergencies.
View detail
Insurance.
The logic of the traffic laws is almost impenetrable to the lady who drives with her phone in her hand or the lady who acts rashly for a parking space! 。 Motorcycle is insured by Motorcycle, but we feel it is necessary to insure against the other party's attorneys underpricing us by less than half! 。 You can suck video data via Bluetooth, but it is much faster to read directly from MicroSD. 。 Therefore, what direct extraction is performed, but the MicroSD is Pssst! and would pop out, so I fell into the body of the car and drank a tear! 。 Towel to prevent falling will also prevent the re-purchase of a $2,000 Card! 。 The only problematic part of the installation is the extraction of the Main power supply. 。 From the bus bar "Co-rolling." The first step is to take it out and solder it up with a It is sure to wrap it with vinyl tape. 。 If you are not confident, it would be better to ask someone who is familiar with electrical work to do a single Juice w 。 Images can be used without problems, but one's voice is also recorded, so those who drive while angry need to be a little careful. View detail
A product that still has room for improvement.
The product is easy to install but still has room for improvement.
This is because it is possible to remove it from the handlebar depending on the car model. It is absolutely necessary to devise and improve it so that it cannot be shifted to the side.
A simple Immobilizer, which makes a noise when it detects vibration or something unusual and alerts a smartphone, would be much more useful in current products.
View detail
the "thousands" column
When I moved the motorcycle back and forth with the key in the lock, the hole at the eyelet bracket on the body became large and ripped longitudinally.
It's a shame, because it would have been nice to be portable and not take up too much space.
View detail
Lightweight and easy to carry
It is lightweight and Compact, making it easy to carry around.
It is said to be made of strong Belt, but I have not actually cut it, so I don't know how effective it is against thieves, but I use it as a stabilizer for my mind.
The drawback is that the color is ? The drawback is that it is inconspicuous because of its color and the U part of the padlock tends to form rusts, which makes the padlock reluctant to move.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
A little more dimming would be better.
[How is it used?
A friend of mine who uses S Company's dimming Shield raved about how convenient it is; I wanted a dimming Shield with ARAI, so I bought it.
Was the one you received as per Image?
The size and shape of the seat is perfect as it is a VAS-V-specific Pin Lock Seat, and it fits the bumps in the Shield just fine.
How was your experience with it?
It functions perfectly as a Pin Lock Seat.
As for dimming.
Dimming degree ( [Color] (Smoked) is not very dark, so it is not likely to be invisible in Tunnel while waiting for the dimming time (of course, it will become Clear after some time, so no problem).
The degree of dimming is the company's [Color] The Image is much lighter than Smoke, about Light smoke.
I don't think it will meet the expectations of those who want the degree of dimming like in Company S, or for those who want it so dark that they can't see their faces.
Is this due to the dimming Coating? The slight distortion, reflection, and doubling of the Light due to the way the Light enters may be a little more noticeable than Clear's Pin Lock Seat.
The size is perfect because it is an exclusive product, and it looks good because it has good parenthesis.
[Points to note]
Installation is not particularly difficult, as with the OEM Pin Lock Seat, but it is easier if you can help push the Shield open if possible.
The hardest part is not to leave Dust, etc. between Shield and Seat. (It can be cleaned and reinstalled, so even if this is a concern, it seems to be possible to re-ca-Barry)
How did it compare to other products?
The more the dimmer Shield of company S, the more the dimmer ( [Color] (Smoke) is not dark.
Other items that would be helpful
Opinions and requests to Manufacturer
I think this is a revolutionary product with PinLock Function.
Since the product needs to be replaced periodically due to its performance, it would be nice if the price were more reasonable and if the dimming intensity were a little darker.
View detail
Overnight Touring Usage
Mainly for overnight touring use.
(Anti-theft measures at accommodation)
Compared to the U-shaped Lock, it is lightweight and takes up less Space, making it convenient to use.
View detail
Fits: Others J-FORCE IV, Others J-CruiseII, Others J-Cruise
Required for anti-fogging.
I bought this product to try out because it is the same etc. product as the OEM Product. I use it for commuting and touring, so it is an essential product. The material is soft and should be replaced regularly. View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Non-dimmable
It is inferior to even OEMPhotoBlackMick, which is two years old and has a weaker dimming. In the first place, the Shield cuts the UV light, so there is no way the Pin lock inside would react to it. I should have realized this before I bought it.
[Color] Smoke and Color:I would like to try Yellow but only dimming is not recommendation.
View detail
Polarization effect subtle
It's polarized, but it doesn't eliminate the reflection of the Glass in the car.
Blue sky doesn't get darker or anything.
The reflected light was just rainbow-colored and the vision was psychedelic.
View detail
Is it priced right?
Motorcycle has more locks, including security, so we decided to use the Dial type.
I like that there is no key, but wish there were 4 digits.
Griffas is good for the UBS effect when locked with LeftLever, but it may hurt Lever, so it needs to be addressed.
View detail
The picture is good, but …
I chose one that would project properly.
But the connection to the app is slow and Response is bad.
Also, for some reason I can't set my watch.
That messed up the time.
So far it has not been easy to use.
I just need to be in the picture in case of…
View detail
Low Cost and Highly Effective Large
[How is it used?
The sound of OEMHorn was so pitiful that we hesitated to use it even when avoiding danger, so we replaced it for safety reasons.
Was the one you received as per Image?
I feel that it is a little too large for a compact motorcycle, since there is not enough space on a modern motorcycle to attach extra items. In particular, it is quite thick.
Was the installation difficult?
There was nothing difficult as all I had to do was remove the NORMAL and replace it with the OEM Bracket.
How was your experience with it?
It is a world of difference compared to the pathetic sound of the OEM. Pow." I was satisfied with the sound, which was like a wind instrument, and I chose Hi after listening to both Hi and Low, and it was the right choice.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Size (especially thickness) is Large tight. In fact, Hi and LowQuantity:I wanted to add a set, but I gave up because it was too large and too conspicuous, and it seemed to have a negative effect on the cooling system in front of the radiator.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
nice sound
It sounded solid and good. I think the other party can hear it. View detail
Initially, I was satisfied with the Large change, but it broke down after a little over a year.
[How is it used?
Installed on Ninja 1000SX, touring only once or twice a month
Was the one you received as per Image?
Body is a little too large.
Was the installation difficult?
It was not difficult because I referred to other people's social networking sites, but rather the position of the FrontCamera and the removal of the Cowl were troublesome.
How was your experience with it?
Initially, it was recorded properly.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
After a little over a year, the Indicator Lamp on my RearCamera has started to blink. I looked at the error Q&A, but all it said was to reconnect the Cable, but even if I tried that, it didn't work. I hope it will last at least 3 years.
View detail
I've been reading a lot about motorcycle accidents lately.
Motorcycle is also required to have a drarecorder.
And it comes with front and rear Camera.
We live in such an incomprehensible time.
You cannot run without a drareco.
Of course, it's for your own protection.
The body is placed under the ETC of the Tandem seat.
The images are very clear and the application is easy to use.
View detail
Good performance
The performance of the Body itself, including Camera performance and durability, is very good, but loading and saving videos takes a fair amount of time. View detail