Reviews
useful gadgets
My motorcycle mobile phone holder is RAM, and the RAM holder is easy to be dismantled. If the car is parked outside, others will take it away with a twist, and the loss is quite large. So I bought this RAM MOUNT RAM plastic arm lock on webike. After locking, you must use the matching cover to remove it to protect the safety of the mobile phone holder. -------------------------------------------------- -------- My motorcycle's mobile phone bracket is RAM, and the RAM bracket is easily disassembled. If the car is parked outside, others take it away, and the loss is quite large. So I bought this RAM MOUNT RAM plastic arm lock on Webike. After locking, I must use the supporting lid to remove it to protect the safety of the mobile phone bracket. Powered by Google Translator View detail
When in doubt, this is it.
The product is not cheap, but if you are in doubt about Mount, this is the one to buy.
It is easy to install and holds the phone securely in place. It is also very nice because there is no need to change a separate Smartphone Case for the Mount.
View detail
That's what I'm talking about
I have been using it on my Camera Mount and have been trying my best to use the accessory type until now, but it broke, so I replaced it with a complete set made by Ram Mount and I am very impressed with the excellent feel and texture. View detail
Smartphone cannot be fixed properly
I chose the RAM Mount because I thought it must be a good product since many people use it and a large percentage of Len BarrelMotorcycle models are equipped with it. However, the holding of the X-shaped retainer is not so good, and the Smartphone gradually gapped on a motorcycle with a lot of vibration, and before I knew it, I had to press the SIDE button. Also, when the X-shaped retainer is expanded to hold the Smartphone, it rotates by the amount of the expanded angle and cannot be fixed. It was not easy to use, so I immediately replaced it with another product. View detail
very stable phone holder
I bought this RAM MOUNT from webike. This mobile phone holder is made of military-standard material. It is sturdy and durable. There are many fixing methods to choose from. My motorcycle is HONDA REBEL500. I fixed it on the handlebar and it is very firm. , It also comes with a rubber band to better prevent the phone from falling. -------------------------------------------------- -------- The RAM Mount I bought on Webike. This mobile phone stand is a military regulatory material, which is solid and durable. There are many fixed ways to choose from. My motorcycle is Honda Rebel500. on the handlebar. It is very firm. It also comes with rubber bands to better prevent the phone from falling. Powered by Google Translator View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It can be used normally
I installed this product when I installed the bar end mirror. It is a little rough in construction, but it is fine for use. However, there is no spanner hook to tighten the screws, so I had to apply screw lock when I installed it.
However, I have changed the Bar end mirror now, so I do not use it.
As a product, I think it is normal.
View detail
Screws to attach to Navigation are required separately
I bought this to install on my Nankai Navigation for Motorcycle. With the cheapo base that came with it.
It's different and far more durable! It didn't fall over from wind pressure and I'm Large satisfied!!!!
One thing to note is that the size is not exactly the same as the included pedestal, so you will need to purchase a separate stainless steel pedestal.
I bought more screws from Home center and installed them.
View detail
Impeccable product!
GunGun tightened without cracking or chipping, and it doesn't even shake when dropped on the ground! It's just tough!
You won't find a better mount than this! It's a RECOMMENDATION!
View detail
Great build! Sturdy!!!!!!! But you have to get your own Rubber or you will Gap!!!!
As the title says. The build quality is great, but you have to prepare the rubber yourself (it deteriorates over time and must be replaced every year).
Gap falls off fast if you don't wrap it lol I wish it came with Rubber… The build quality is great!
View detail
I would choose the phone.
I bought it because it is famous. I am not worried about it falling because it is firmly fixed.
However, due to its shape, there is a possibility that the button on the phone may hit the device, and while the Xperia5 had no problem, the AQUOS WISH had a button problem. Before purchasing, please pay attention to the position of the button on your phone.
View detail
I use it on my iPad Air5.
Purchased for use on a tabletop or in a car, not for mounting on a Motorcycle. I use it with other Suction Cup type, Clamp, Arm and other Ram Mounting systems.
I usually carry around my iPad Air 5 with a Case that can also be used as a STAND, but I don't like to remove this Case and attach it to the Holder every time, so I was looking for a Holder that can be used with the Case still attached. RAM MOUNTS RamMount TabTight for iPad (1st-4th Gen) I decided to try the As a result, it can be used normally with the Case installed. Charging in this state is also “somehow”possible.
The product is not used in Motorcycle, but in daily life Level, and there has been no drop in this state so far.
View detail
I've never used Elastic band with 4 fixed phone locations.
I'm using it now on 3 cars, R6, Z400, ktm, 350Off car, and it has never failed me. on R6, it has never failed me even in mountain pass and high speed. 。 I used to use it on my Z1000 with no Screen and never fell off even with the wind (I have the phone slightly tilted) (assuming I have never removed the 4 fixed Rubber points). View detail
Mounted on ZX6R Tank Fixed Bolt
[How is it used?
ZX6R G type for creating a phone mount.
Was the installation difficult?
Simply remove and replace Bolt.
A separate M6 bolt of about 50mm is required.
The OEM fixed Bolt is M6 30mm.
How was your experience with it?
I used it to create a pedestal to hold the phone in place with Rec Mount.
Generally, I think that Multi Bar is often installed on ZX6R, but I chose this product because I wanted to make the steering area as refreshing as possible and did not want to put a large and conspicuous Multi Bar or Smartphone Holder on the ZX6R.
The Smartphone lock can be removed from the Arm when not in use, leaving only the ball joint. When not in use, the entire Arm can be removed from the Smartphone lock, leaving only the Ball joint.
[Disappointment.
The texture of the resin is poor and looks cheap.
It is fine for use, but it has a "Made in USA" feel to it.
[Notes]
Ball diameters may differ between Ram Mount and Rec Mount, so it is best to check for compatibility before purchasing. Some products are compatible.
After installation, Quantity:Pair (for Left and Right) The only thing that needs to be checked is that there is no interference with the Top Bridge when the Handlebar is cut to
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Just the right place.
I was able to attach the Smartphone Holder in just the right position.
It can be installed without any problem with the supplied Bolt.
View detail
quite messy
Used on 10R, glad to be able to use it since the car model has few options for mount position.
With 10R, short arm could not be used due to interference, standard or long arm is better.
Some reviewers say that the bolt does not fit, but the M6 bolt is included, but in my case, the length did not fit.
The bottom of the Screw hole is reached, so the short Bolt owned by the company is used instead.
I didn't use it, but the color that comes with it is Material:Plastic and concerned about durability.
The finish is quite dirty, as is the case throughout the Ram MountSeries.
The right-angle, square structure makes it unattractive and bulky.
View detail
Rigidity is high and functionality is fine. Resin texture is a little poor and has a lot of BALI.
[How is it used?
CameraMount for Smartphone and Circuit driving.
Was the installation difficult?
It is not difficult, but it is a little unfriendly because it arrives in RoseRose without any Instruction Manual or anything. American in that area.
How was your experience with it?
The rigidity is high, and as long as you use a well-fitted ball joint, there is no rattle or wobble at all.
The surface finish of the resin is rough and there are still some BALI and cut marks from the manufacturing process. I was concerned about it, so I used File to break it in. I feel American in this area as well.
[Included Parts:were they on?
All included.
No Instruction Manual.
[Was there anything that disappointed you?
Roughness of resin surface finish.
Point and hang of installation
If the ball diameter is not a good fit, it will wobble.
Some similar looking products may or may not be Ram Mount compatible, so it is best to check for compatibility when purchasing.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CG125, HONDA SUPER CUB, YAMAHA XSR700, YAMAHA MAJESTYS, YAMAHA Tricity155, YAMAHA BirdCity, KAWASAKI BALIUS250, SUZUKI ADDRESSV125, HONDA CROSS CUB, HONDA CBR250RR
Easy installation
I'm happy with the Refreshing because the Tough one doesn't fit around the handlebar of the MOTARD. View detail
Defective product?
When I extended the Rubber to attach the product I received to my phone, it snapped.
I was totally unused, so I'm Bigly surprised at this result.
Is it due to the aging of the Rubber or the Rubber Material itself?
Anyway, I am sorry.
View detail
Fits: YAMAHA YZF-R3, SUZUKI GSX250R, YAMAHA YZF-R25, KAWASAKI Ninja250SL, HONDA CBR650F, KAWASAKI Ninja250, HONDA CBR250R, HONDA CBR400R, HONDA CBR150R, HONDA CBR500R, YAMAHA YZF-R3
It's only a millimeter, but it's a millimeter
I can compromise at worst that there is BALI or it is messy looking, but the one I have has a BallSize of 1 inch as shown in the picture. (2.54cm) It is not
It is only 1mm as per Title, but I gave up using it because it is slightly loose whether I squeeze the Arm or not.
I'm sorry
View detail
Quality!
No complaints. Can be used in a variety of ways.
Radar on Right and Smartphone Navigation on Left are Quantities:Set
View detail