Reviews
[Webike Monitor] Although the Frame slider made from OVER was attached, since the Axle Slider for Ninja1000 was not put on the market, the object for ZX-14R was processed and attached by OVER. Since the portion stuck in the Axle Shaft of a DURACON Ba
[Webike Monitor] Although the Frame slider made from
OVER was attached, since the Axle Slider for Ninja1000 was not put on the market, the object for ZX-14R was processed and attached by OVER.
Since the portion stuck in the Axle Shaft of a DURACON Base is [ the ZX-14R ] thicker although the breadth of a Wheel Axle part is almost the same when
2 vehicle type is compared, it can attach as it is only by dropping an outside diameter on an engine lathe.
If the
Manufacturer has gathered, when it will be pleasant, however (smile) will imitate, I need your help by self-responsibility.
O -- since the DURACON portion is thicker than made in a Manufacturer besides a good point
-- point
O with a high protection effect -- a regrettable point
-- the point which is not made from easy processing although it becomes Ninja1000
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300
[Webike Monitor] Since it had rubbed against pure Step when it was made to bank, the Back step was purchased this time.attachment is 60mm Back / 50mm Up. It set up.comment became that it is easy to make it bank more than it considered. I
[Webike Monitor] Since it had rubbed against
pure Step when it was made to bank, the Back step was purchased this time.
attachment is 60mm Back / 50mm Up. It set up.
comment became that it is easy to make it bank more than it considered.
It is the shin without a Position's being hot, even if it has ridden for a long time again.
It is the touch which does not get tired rather than a pure Step.
In addition, in order to attach, change of a Side stands is required.
View detail
[Webike Monitor] It purchased for change to a Down type of the Muffler of a FI MONKEY. It is light than expected and the color is also collected into the chic.The portion of the Silver has no Luster.They are form and the appe
[Webike Monitor] It purchased for change to a Down type of the Muffler of a
FI MONKEY.
It is light than expected and the color is also collected into the chic.The portion of the
Silver has no Luster.They are
form and the appearance highest.... I think that a price is a Neck too. [
]
If it becomes a little cheaper, I will think whether to be easy to take out a hand.As long as the
budget allows, they are goods which we can recommend to you.
View detail
[webike Monitor] attachment also has no problem to a sound racy from the news dealer Sound of a wearing Normal muffler to FI MONKEY. Since sound is loud, it cares at - midnight etc. early morning. -- it is satisfied excep
[webike Monitor]
attachment also has no problem to a sound racy from the news dealer Sound of a wearing
Normal muffler to
FI MONKEY.
Since
sound is loud, it cares at - midnight etc. early morning.
-- it is satisfied except it! thank you for the
-- OVER
View detail
It stands and purchases to the Wound prevention at the time of ゴケ, etc. However, when it actually attached and having been seen, I am as a Design and thought かなっ. The processing accuracy of the parts has improved considerably and it was attache
It stands and purchases to the Wound prevention at the time of ゴケ, etc.
However, when it actually attached and having been seen, I am as a Design and thought かなっ.
The processing accuracy of the
parts has improved considerably and it was attached exactly and simply.
At the time of
attachment, it worked with a Pliers and two 10-mm Box wrenches.
When removing the
split pin and using and attaching a Pliers, it is bolting with two Box wrenches.
Or [ that a Nut is not bound tight in case of the
Glasses wrench ] --
View detail
It stands and purchases to the Wound prevention at the time of ゴケ, etc. However, when it actually attached and having been seen, I am as a Design and thought かなっ. The processing accuracy of the parts has improved considerably and it was attache
It stands and purchases to the Wound prevention at the time of ゴケ, etc.
However, when it actually attached and having been seen, I am as a Design and thought かなっ.
The processing accuracy of the
parts has improved considerably and it was attached exactly and simply.
At the time of
attachment, it worked with two 10-mm Box wrenches.
Or [ that a Nut is not bound tight in case of the
Glasses wrench ] --
View detail
The method of attachment was thought by itself this time, and it purchased here. attachment can be performed if a pure Step can remove. In my case, since it was the first experience, a pure Step (Brake side) did not separate easily and it
The method of attachment was thought by itself this time, and it purchased here.
attachment can be performed if a pure Step can remove.
In my case, since it was the first experience, a pure Step (Brake side) did not separate easily and it was merely in difficulties.
The
Points are removing from the pure Step of a Brake switch, and attachment for the second time.
I thought --, when the
description was written a little more carefully.
I consider
recommendation as it is better to leave it to a Motorcycle store.
View detail
It changed, when exchanging the Webike Monitor Swing arm and a Wheel. rigidity and brightness do not accumulate. Mr. OVER, the highest.
It changed, when exchanging the Webike Monitor
Swing arm and a Wheel.
rigidity and brightness do not accumulate.
Mr.
OVER, the highest.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300
Cling to XJR1200. At the pure Step, since it rubbed into the Cornering, it exchanged. Since a Position can also choose the Design well, the Position suitable for itself can be chosen. Merely Since it will be interfered in case
Cling to XJR1200.
At the
pure Step, since it rubbed into the Cornering, it exchanged.
Since a Position can also choose the
Design well, the Position suitable for itself can be chosen.
Merely Since it will be interfered in case of a pure Side stands when carrying out a Shift change if it exchanges for a Back step, I recommend exchanging for the STAND of adjusted parts.
View detail
Oneself of the amateur was also able to do attachment. sound is the highest.
Oneself of the amateur was also able to do attachment.
sound is the highest.
View detail
It is as lightweight as a Full titanium truly. Although sound and appearance were good, it had carried out as [ remove / the Bolt which stops a Baffle and is is welded to the Nut, and / it / easily ].
It is as lightweight as a Full titanium truly.
Although
sound and appearance were good, it had carried out as [ remove / the Bolt which stops a Baffle and is is welded to the Nut, and / it / easily ].
View detail
I equipped with a black urethane paint application. Appearance changes fairly first. Rigidity is dramatically excellent and unstablity has been fairly improved in a straight line. As well as a high rigidity, there is a softness in the snap and it is very
I equipped with a black urethane paint application. Appearance changes fairly first. Rigidity is dramatically excellent and unstablity has been fairly improved in a straight line. As well as a high rigidity, there is a softness in the snap and it is very satisfying parts. Although simultaneous wearing with Gayle is also possible, it may be necessary to change the torque rod. Cautions are required since some change is needed for management of the hose of a rear brake. View detail
It purchased, when exchanging a Caliper for the product made from a brembo. -- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are ta
It purchased, when exchanging a Caliper for the product made from a brembo.
-- although the direction which unites a Support of another vehicle type pure, attaches, and is carried out was seen well, since the thing with a Rotor for which pains are taken to carry out Center appearance was heard, this product that can carry out Pons attachment was chosen.
It was easy wearing in
.
Since it is the
appearance * price *, it is pleasing.
View detail
* carrying out appearance good and attaching -- an easy * price -- * -- individually good shopping * -- is OVER -- the thing ♪
* carrying out appearance good and attaching -- an easy * price -- *
-- individually good shopping * --
is OVER -- the thing ♪
View detail
When exchanging a Caliper, it purchased together. It is a Polished if a feeling of appearance * rigid feeling * brightness * Caliper support is also made the product made from OVER!!
When exchanging a Caliper, it purchased together.
It is a Polished if a feeling of
appearance * rigid feeling * brightness *
Caliper support is also made the product made from OVER!!
View detail
Fits: HONDA CB1100EX, HONDA CB1100, HONDA CB1100RS
They are comment which ride for a long time during a weekend. More than it considered, the lightness of clutch operation can be felt. Although it was most in the waiting for a signal to use a Neutral from the weight of a Clutch until now [ ], the
They are comment which ride for a long time during a weekend.
More than it considered, the lightness of clutch operation can be felt.
Although it was most in the waiting for a signal to use a Neutral from the weight of a Clutch until now [
], the signal waiting which has grasped the Lever is a margin after Light-touch Clutch-Kit wearing.
-- although the Blinker operation which grasps a Clutch lever again was very pain until now (especially the end of a long distance ..) --
-- it can manage now easily.
An effect can be firmly taken in to the grip fall which is later effective gradually like the
body blow.
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
He wanted to lower a little handle height, and it purchased. Since that height can be adjusted can also choose ! authentic positive height good, it exchanges, and I think that there is little failure. Since an iris diaphragm difference can also be
He wanted to lower a little handle height, and it purchased.
Since that height can be adjusted can also choose ! authentic positive height good, it exchanges, and I think that there is little failure.
Since an iris diaphragm difference can also be adjusted, according to the physique, it is made to its own motorcycle.
That bar end is too light gives a demerit mark.
Impact may also suit appearance and others are psychos!
View detail
Fits: KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX)
At the time of a stop, it hit, when reaching a guide peg, and since the pure step position was dissatisfied, it exchanged. It is the grade which became good after [ some ] exchanging. When a step position changed, it was good that the hips became
At the time of a stop, it hit, when reaching a guide peg, and since the pure step position was dissatisfied, it exchanged.
It is the grade which became good after [ some ] exchanging.
When a step position changed, it was good that the hips became less painful even if becoming easy to carry out a knee grip and a riding position became back automatically and it had ridden for a long time.
it is good and can also choose [ the impression of appearance, or ] black -- good -- I consider.
pure -- since vibration increased more -- * -- four were used.
View detail
Although it had written that it was light in play [ of other Ho ], it actually had and was surprised at the lightness! While attachment also looked at instrumental, it was made to the smooth. Although it was not dissatisfied, it was uniquely worrisome
Although it had written that it was light in play [ of other Ho ], it actually had and was surprised at the lightness! While attachment also looked at instrumental, it was made to the smooth.
Although it was not dissatisfied, it was uniquely worrisome to have carried out exhaust leakage from the terminal area of an exhaust pipe and a muffler, although it is little.
Since it is not gasket specification, it is unavoidable, but I think that it did not become waste of energy when having urged use of the sealing compound by instrumental.
Although it is finally sound volume, also noisily there is nothing individually and it is touch are not quiet, either.
View detail
Fits: KAWASAKI KSR Pro, KAWASAKI KSR110, KAWASAKI KSR Pro, KAWASAKI KSR110
The thing which can use a hub damper with the forging alloy wheels for KSR chose here by design priority, although there were only this product and a thing of a gale speed. Exclusive elegance is [ hub damper of this product ] attached. Moreover, a
The thing which can use a hub damper with the forging alloy wheels for KSR chose here by design priority, although there were only this product and a thing of a gale speed.
Exclusive elegance is [ hub damper of this product ] attached.
Moreover, a sprocket uses the thing of a XR system (NSF100) instead of the object for KSR.
If it does not choose by a design like itself, the direction which chose the wheel of the gale speed which can use a pure damper etc. may say that repair of the future is considered.
moreover -- according to a manufacturer -- this GP-SIX hub damper specification for KSR is stock -- as long as -- since that is right, a person needed considers that it is [ which comes out and becomes an out of print ] better to place an order a little early.
View detail