Reviews
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI SuperSport S, DUCATI SuperSport, DUCATI MONSTER 1200S
A Little Customization
I saw a custom Brake pedal and Clutch pedal to match the color of the car's body on another Japanese car, and I wanted to try it.
I had the installation done by Dealers because I didn't think I could get to it with the tools that Brake pedal has. My rep told me that he used the Special Tool to install the Brake pedal. The video makes me wonder if I could do it myself, so you might want to give it a try.
The build is solid and the Anodized paint is beautiful.
View detail
Fits: DUCATI SPORTCLASSIC Sport 1000 S, DUCATI SPORTCLASSIC Sport 1000 Biposto, DUCATI SPORTCLASSIC GT 1000, DUCATI SPORT TOURING ST4, DUCATI SPORT TOURING ST3, DUCATI MONSTER 1100 EVO, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 796, DUCATI DIAVEL 1260 S, DUCATI DIAVEL 1260, DUCATI DIAVEL 1200, DUCATI XDIAVEL 1262 S, DUCATI SCRAMBLER 800 Icon, DUCATI SCRAMBLER 800 Cafe Racer, DUCATI SCRAMBLER 800 Full Throttle, DUCATI XDIAVEL 1262, DUCATI SUPERBIKE 848 EVO CORSE, DUCATI SUPERBIKE 848 EVO, DUCATI SUPERBIKE 848
Slider.
This is a slider for the clear part of the Clear Clutch Cover, which I bought because I thought I would cry if I got a scratch on it as the Clear Clutch Cover is quite expensive.
Installation Bolts are also included. The Installation Instruction Manual is one piece, but Torque should have been listed, so if you have a Torque wrench you can do it yourself.
The OEM Clutch cover is trapezoidal when viewed from the side, but the Clear Clutch Cover is square, so I was worried about the boots hitting the release of the rear brake. When I installed this Slider, there was more anxiety, but it has never hit it though it has been nearly one year. It depends on how to place the foot.
View detail
The construction is beautiful.
I bought this product because the Rubber portion of my previous CNCRACING Lab One Grip was quite worn out.
As with the Lab One, the Inner on the Throttle side was installed using the OEM's.
I'm looking forward to seeing how long it lasts as I felt the lab one wore out surprisingly quickly.
The only difference in design between the Lab One and the Lab One is the shape of the Grip end, which is the inner side of the body when worn, is different.
View detail
surprisingly slow
The Grip part is made of rubber. This part, especially the LeftGrip, is wearing out faster than I expected and I decided to replace it after a little over a year.
I liked the design and the Anodized paint job nicely, but the durability was not as good as I thought it would be.
View detail
Fits: DUCATI Multistrada 950, DUCATI Multistrada 620, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro, DUCATI Multistrada 1100/S, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER1100EVO, DUCATI MONSTER1100/S, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S
Just right for a little Custom.
I bought this because I wanted to Custom it a bit.
It takes only a few minutes to install and there are no oil leaks.
It's been about 2 years since I replaced it and I haven't had any problems.
I think it was a good Accent.
I gave it a 3 star cosmetic rating because it's not something you can experience in terms of performance, but I think it's one of the cheaper CNCRACING Parts.
View detail
Fits: DUCATI HYPERMOTARD821, DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD821
Spacer for Handlebar Post.
I bought it along with CNCRACING's Handlebar Post because I changed my Handlebar from OEM to rizoma's DragType and it was 2cm short of the height to pass inspection.
It also comes with a Bolt for mounting.
I've been using it for about a year since it was installed and have had no problems.
View detail
Fits: DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Granturismo, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI STREETFIGHTER, DUCATI STREETFIGHTER S, DUCATI 1299Panigale, DUCATI 1299 Panigale S, DUCATI 1199Panigale, DUCATI 1199Panigale
Rear Sprocket.
I bought this Sprocket from CNCRACING to replace the Sprocket as well as the Chain replacement.
Since I changed the number of hinges on the Front Sprocket, I made this Sprocket the same as the OEM hinges.
I overlooked that the CNCRACING Sprocket is simply not interchangeable with the OEM Sprocket, so I purchased and installed an additional one. You have to look closely at the product description.
I like the product itself.:Since it's Aluminum, I'm a little concerned about how durable it is, but it's still Large sturdy, even though I've driven about 10,000 miles since it was installed.
View detail
Fits: DUCATI MONSTER 821, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821, DUCATI HYPERSTRADA, DUCATI HYPERSTRADA, DUCATI HYPERMOTARD939, DUCATI HYPERMOTARD821
I like it.
I bought it together with RiserUpper because I changed the Handlebar from OEM to rizoma DragType one and it was not high enough for inspection.
Since the Handlebar is a rizoma, I thought about getting a rizoma one, but I went with the CNCRACING one because of the looks.
I was worried about the strength and durability because the area in contact with the Handlebar is smaller than the Handlebar Post of OEM, but it has been more than one year since installation, but there is no problem.
The price is reasonable, but it is imported from Italy, so I think it is standard.
View detail
Fits: DUCATI XDiavel, DUCATI SuperSport, DUCATI SuperSport S, DUCATI Multistrada 1260S, DUCATI Multistrada 1260, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Touring, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI DIAVEL, DUCATI MONSTER 1200, DUCATI MONSTER 1200
Sprocket's Flange.
I bought this Flange with Black as a Base to change from OEM to match the Chain exchange.
I'm happy with the texture and other aspects of the car as it fit my car better than I expected.
Performance is Flange, so I don't know.
However, the Flange and Sprocket cannot be installed by CNCRACING alone, so it will cost you quite a bit of Gold to replace them.
I like the way it looks after it's installed.
View detail
Isn't it a good look?
I put it on for a change of pace. It's a nice touch. First time I've been delayed in my arrival, no spec. but it's a shame. Good luck with the next one. View detail
Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200, DUCATI MULTISTRADA 1260 Enduro, DUCATI MULTISTRADA 1260 S Pikes Peak, DUCATI MULTISTRADA 1260 S, DUCATI MULTISTRADA 1260, DUCATI SUPERSPORT 936 S, DUCATI SUPERSPORT 936, DUCATI SUPERSPORT 950 S, DUCATI SUPERSPORT 950
You scared the hell out of me
I bought these to replace my brake pedals and clutch pedals with CNCRACING ones, and although there are Foldable ones, I chose this one because I'm mainly touring.
The installation itself is not less challenging, but I was surprised by the item itself.
It may be hard to see in the picture, but only half of it is non-slip treated. Half of them are smooth.
When mounting the brake pedal, the non-slip surface should be on the top of the brake pedal, but the problem is mounting it on the clutch pedal where it is raised or lowered. However, the problem is to find out which direction is the best for the non-slip surface.
In my case, I made sure that the non-slip surface was on the Footpeg side, and on the Right Side when viewed from the side, so that the non-slip surface would touch the Boots when raising or lowering the Clutch pedal.
I've been using them for almost a year now and I've never had Boots slip.
I was surprised to see that the non-slip surface is only halfway down.
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI MONSTER 821
I'm almost satisfied.
I was told that the OEM Parts had been discontinued, so I ordered this one in a hurry.
The texture is the same as the OEM and the gold price was about half of the OEM's. However, I added a separate washer to the hole because the hole is larger than the OEM.
View detail
Fits: MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA RIVALE800, MV AGUSTA F4-750, MV AGUSTA F4 RC, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F4 1000R, MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA BRUTALE990R, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R
It's a component that's important to look at.
It seems that the female screw of the pure STD Nut and the male screw of the Shaft were chewing on the replacement of the Tire, and it was not easy to remove it.
After removing it, the threads were ruined, so I replaced them with CNCNut.
View detail
Fits: MV AGUSTA F3 800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE800RR, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA F3, MV AGUSTA F3
Clean cutting
It is a limited edition RedWhite color so it stands out.
The cutting is also very clean and tight underfoot.
Material is Material, so be careful when you fall over.
View detail
Fits: DUCATI DIAVEL, DUCATI DIAVEL
Good build.
The quality, etc. is still fine with this manufacturer's. The texture is good, so the replacement is worth it.
Dare I say it's a complaint.
I chose black and it was too plain. (Car models are Chrome.)
haughty
Isn't it?
The paint on the OEMCap was peeling off, so I replaced it anyway, but should I have made it a little more flashy? and this rating.
View detail
Fits: DUCATI Multistrada 950, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200, DUCATI Multistrada 1200 Enduro
Installation problems
I bought this product for the MULTISTRADA 1000DS1200Enduro, but when I opened the package, I found out that the normal screen bolts could not be used for the installation. But when I opened the package, I found out that the mounting bolts for the normal screen are not compatible with this screen. I think it's a problem that it doesn't come with View detail
Fits: APRILIA RSV4, DUCATI MONSTER1100/S, DUCATI MONSTER1100EVO, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI STREETFIGHTER848, DUCATI Scrambler Classic, DUCATI Scrambler Full Throttle, DUCATI Scrambler Icon, DUCATI Scrambler Urban Enduro, DUCATI XDiavel, KTM 1190 RC8R, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE990R, MV AGUSTA F4 1000R
It is as expected
I bought the Repeat because I liked it on my previous Z1000.
Flange and Cap are sold separately, so at first glance it seems like a hassle, but there is a Merit that allows you to separate the Anodized colors.
View detail
Fits: DUCATI 1098, DUCATI 1098, DUCATI 1098R, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo
Self-satisfied
I bought it because I was curious about it when I replaced the Sprocket, and I installed it though I was worried because it was just self-satisfied. I think it is possible to install it in the OEMsprocket although it is not an OEMsprocket in the image. View detail
Fits: DUCATI 1098, DUCATI 1098, DUCATI 1098R, DUCATI 1098S, DUCATI 1098S, DUCATI 1199Panigale R, DUCATI 1199Panigale S/Tricolore, DUCATI 1199Panigale, DUCATI 1199Panigale, DUCATI 1299 Panigale S, DUCATI 1299Panigale, DUCATI DIAVEL, DUCATI DIAVEL, DUCATI MONSTER 1200, DUCATI MONSTER 1200R, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200, DUCATI Multistrada 1200S Granturismo
How's that for self-satisfaction?
I bought this when I was replacing the Sprocket, I was worried about it because it was just a self-satisfaction, but I installed it, and it is combined with the STMSprocket carrier! View detail
Fits: YAMAHA MT-07, YAMAHA MT-01, YAMAHA FZ6, YAMAHA FZ8, YAMAHA XJ6, YAMAHA MT-09, YAMAHA YZF R1, YAMAHA YZF R6, MV AGUSTA Dragster 800, MV AGUSTA Dragster 800 RR E5, MV AGUSTA Dragster 800 RR, MV AGUSTA F3 800 RC, MV AGUSTA F3 675, MV AGUSTA F3 675 RC, MV AGUSTA F4 1078 312 RR, MV AGUSTA F4 1000, MV AGUSTA F3 800, MV AGUSTA F4 1000 312 R, MV AGUSTA F4 1000 R, MV AGUSTA F4 1000 RC
Flange is sold separately.
Flange and Quantity:Buy in Set, Cap.
There is a Quick and Key type, but I bought the Quick.
It's cool with RACING.
I can't wait to install it.
View detail