Reviews
It's cool to look at
I bought it for its looks, but I don't expect the Shield to be as effective as it looks It's not there Also, the Shield is shaking at high speeds, and compared to CAFE, it's not as good as the CAFE It is recommended for those who buy it with emphasis on design View detail
Very good
I've been thinking about it for a long time and I'm glad I put it on The dimensions are fine
It went on easily The color was not different from MotorcycleBody
View detail
Fits: YAMAHA V-MAX 1680, YAMAHA V-MAX 1680
I really like the shape of the Shield but…
The warped portion of the top of the Shield is visible, with a wiggly view The aerodynamics and driving are fine However, the wind that rolls in will be forward In the case of "Sunglasses" with half-Cap, "eyeshades" will come out in front View detail
Fits: KAWASAKI W650, KAWASAKI W400, YAMAHA SR500, YAMAHA SR400, Others
The construction is crude
Tail lamp part's screw hole and FenderMounting Bolt hole are not horizontal No slant! It's disappointing that it looks like an amateur drilled a hole in it without taking measurements beforehand View detail
Effective
Since removing the A-TECH Cowl, I've been noticing the wind I feel in my stomach area
But I didn't want to wear a Bikini cowl, so I decided to wear a Screen
After some research, I found out that this Shield can be mounted at different angles and decided to use it! It was
Rectification effect? Windbreak? was satisfying enough
I didn't feel much of a breeze from the neck down even with the Shield at its most laying down
For me personally, I am satisfied with the Large variant
View detail
Guyra Gauntlet
Excellent quality, very strong and dense material. Installation takes very little time, technically simple. Excellent quality, very strong and dense material. Installation takes very little time, it is technically simple. translated by Google Translator View detail
I'm satisfied with the performance and functionality of the NAKED cars
You can't drive on the highway without it I have to admit that my body feels much better after installing this screen This is the longest type you can buy It's also possible to change the angle of Screen for each run Motorcycle is BANDIT1250 with wind pressure of more than 220km speed It's not a Full Cowl car where the Screen angle is unbearable and you fall asleep If you are driving over 200km in circuit, you can put the screen angle down low and use the The driver should drive with the View detail
That's about as good as it gets..
The product arrived in a temporary assembly
It's good that it is temporarily assembled because you can do the image when it is installed
Because the bolnos were a little too long, when I tried to install and main-tighten them
Play? It was rattling because there was a
I replaced it with a handful of Bolts and installed it
Because of the model of car, there is quite a blur at a fixed speed at low speed
Well, it's not like this
View detail
Good vibes
The colors are good, and I did the installation myself, but it was not so difficult to do However, because the Camera of Drorecco was installed in the Bolt part next to the Light, the Bolt's It's not long enough, so I'll have to order a 20mm one from the nearest Home Center and also because Horn is set to Double, it is necessary to install Bracket at the bottom I only took an extra step I don't know to the effect of the wind protection because I haven't driven on the highways yet, but I'm not sure if it's as good as I thought it would be I am very happy with Styling I was lucky enough to be able to buy it for less than 10,000 yen by chance View detail
Wow that's cool
Bolt On for all installations
An Instruction Manual with illustrations is also included, and that's it! Even with my lack of knowledge, I was able to install it in about 2 hours
It is important to note that the removal of the Master Cylinder Bracket will result in an 8mm To remove the Hexagon Bolt, you need a Socket or Spanner for the 8mm Quantity:2pc. Set required (I'll make the rounds.)
I only had one Tools Set, so I had to run to buy a Spanner Did …
The treatment of the surface visible from the rider's side needs to be done a little better considering the Gold amount of the product
Also, the SparkRingBlack is a monochromatic paint job and doesn't come with a Decal I wish this one was included too, considering the gold amount
The installation itself is solid with no jumpy sound as it is fixed by screw at three points on the side and bottom It is
Is the wind protection effect not that much different than when you don't have it on? It's about
I'm not sure if it's a good idea to get down on the Motorcycle or not I think it's an Items that enjoy the change in look and feel
As others have said, the ForkEmblem holds the underside of the Bikini Cowl in place It seems to interfere with the Bracket
I've tried
dr.zRACING's ForkEmblem could not be installed
View detail
Practicality and design at the same time
Installed on a 2010 SR400 FI
Even an amateur like me can easily install it (Because the Bolt on the body side was Solidly, I had the PRO remove it
The latest SR400 is Canister (?) under Left It may not be able to be installed due to interference with the Bumper because of the Large Durable
I don't know how the Bumper works, but according to the PRO When you fall, Frame bends too, so it's the same It seems to be, but it seems to be less likely to be underneath the car body if there is it, so the sense of security is created It is
The classic-looking SR400 has been given a more classic look and is now a Large I'm satisfied
However, when it becomes used with Gymkhana etc., it is likely to shave on the problem of the bank angle
View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI W650, KAWASAKI W400, KAWASAKI ESTRELLA
Essential for improving the classic look
I can't start without it in order to make it Classic
I installed it on a vintage front fender made by the company
Plate is Steel and massive
When I tentatively assembled it, the Bracket to which the attached Plate is attached was loose, so I had to screw it in normally If you just tighten the plate, the plate will wobble, so you have to bite something or something (I need to drill and install the holes for Front Fender and Wind Cutting (I asked the Motorcycle shop to do it for me and they did a good job of working out the problem areas)
Now, I'm painting White and pasting my favorite characters with a character sticker on it [Color] I'm spraying Clear; you can also cover the edges with EdgeGuard
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
I want to complete the Series
Purchased at the same time as the company's Lear Fender
It's still in good shape
Installation is easy and can be done by removing the 4 bolts on the body side (Because the bolts on the body side were too hard, it was not possible to remove by itself, so it was installed at a motorcycle shop (I've had it done.)
The gap between the front tire and the fender is quite large In addition, I have their wind-installed Bolts on my Tire while running It seems to interfere So far, there are no scratches like that on the Tire and it doesn't feel like it's hitting, so that's a Large It may be sturdy, but it looks like it may need to be modified depending on the body of the car
We recommend painting this one because it is Black with full of plastic feeling as well as Rear Fender It is
View detail
Classic look
Installing this will make the car look a little bigger and more distinctive
I'm enchanted by the Forme, which I love when I install it and look at it from an angle back If you want to install this, you should use Solo for Seat to make use of the R surface to the largest limit seat to make the shape of the rear fender more visible, and I'd like to
It was easy to install, but the accuracy was not so good because it is FRP Bolt on it, but one place didn't fit perfectly, Rear blinker Quantity in the vicinity:Pair (for Left and Right) and Quantity on the back of the vehicle:Pair (for Left and Right) When the body side was adjusted to one of the 4 places in total, it was completely Gap Because it is not a fatal wound which affects driving, if you check the looseness of Screw each time, it is Large It will be strong
The company's Front Fender is also a must if you want to install this
I don't know how long the license plate holes are durable because they are SRs with high vibration It is securely attached
Color:If it's unpainted, it's black with full of plastic, so it's better to paint it as it is is better
View detail
Fairing
Beautiful design and fit. Easy to instal. Well made. Color is not quite right. Too dark on the brown and the orange has too much red in it. Top portion where screen is attached vibrates a bit at 110kph. I am still happy with it and prepared to overlook these slight issues. View detail
Fairing
Well made. Looks better than OEM cafe racer style in shape and paint scheme. Finished product looks like OEM. Will add photo when bike arrives. View detail
It's windproof and overall good
VTR250 (FI) I installed it in
The shape of the bracket, which is adjacent to the brake master and also serves to prevent loosening, is slightly different Small measure, I had to put it on at an angle (You could say that you could adjust the angle a bit instead.)
The Clutch Side was wonderfully accurate and was pontooned on without a second thought
I am pleased with the overall accuracy of the product The logo of CHIC DESIGN is on the bracket of the polycarbonate guard I personally like the fact that it's carved and comes with a sticker
I could feel the windproof effect My fingertips were less likely to get cold However, the shape of the Guard may have caused a little wind to come around my neck (Maybe it's my imagination.)
The Bracket is quite thick, heavy and strong and secure
No Chatter etc. has occurred while running
The Instruction Manual is handwritten like a Quantity:1pc. came with it It was a bit confusing to me as a beginner. to remove the lock nut on the Mirror Remove the Holder.... If you're there, you'll understand the obvious, but it took me a bit of work
The price is expensive, but I am generally satisfied with the product
View detail
I am satisfied.
Bikini cowl has come out a lot, but I bought it thought that the flowing design with the corner of CHIC DESIGN also fits the Tank shape of Motorcycle.
I waited a month and a half for short but it was worth it. I also like the color scheme of OEM color.
Installation is easy as it also has Instruction Manual.
FBrake fluidReserver tank and Cowl gently interfere with each other even slightly using Bracket of the enclosed item, so we adjusted it by hand.
Although it is a snake, but simultaneous wearing with ForkEmblem out of DOREMI COLLECTION can not be done because it will interfere, so be careful.
View detail
It does not fit in Long Screen
I also searched on Long Screen whether or not it searches I did not see any clear answer, but I seemed to be looking, so I tried to purchase, anxiety hit me, I interfere with Screen, sleeping in the warehouse View detail
Since the color is OEM color, it is heard as OEM Product. Well done.
I am satisfied with the design color as well. Impression in high-speed driving, but as you gradually extend your hand from Cowl, the wind hits from around the head. It is functioning without problems at 100 km running. In order to interfere with Front brakeReserverTank for installation, I did a little Hand Bent.
Although the tip of Cowl vibrates finely at the time of running, there is no particular problem. CHIC DESIGN is good for the fireball collar. For now.
View detail