Reviews
stylish
Ratchet makes it easy to install.
Honestly, I wish it were cheaper, but the quality is very good. It can make the humble Light area more fashionable.
View detail
Fits: HONDA GORILLA, HONDA DAX, HONDA MONKEY
Recommended!
It's looking good!
View detail
Fits: HONDA MONKEY, HONDA DAX
Cost-effective!
Used for GORILLA!
Just what I was looking for WITHOUT Reflector on the SIDE!
It is well made.
View detail
I finally found a STAND that fits the length!
Used on RZr with modified suspension.
This is the third Size purchased via the company's 275mmAluminum→255mmSteel.
I finally came across a STAND that fits the length.
However, so far, STAND has not been overloaded by standing up too much, but this time it will be overloaded to some extent.
Since it is for MONKEY, the first question is whether it is strong enough or not.
View detail
Minimoto6V Regulator
It is easy to install. Now I don't have to change batteries so often. View detail
Fits: HONDA Ape 50, HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Highly recommended!
Highly recommended!
It motivates me because I can see it while driving.
It's a CustomPoint, and a quick clean look makes the Motorcycle look beautiful!
It's better to close it with masking tape so it won't get scratched!
View detail
Fits: HONDA GORILLA, HONDA MONKEY
MONKEYz50j Rear suspension replacement
I bought this rear suspension because the rear suspension of my MONKEYz50j for street driving was rusted. It is enough for city driving. I think it is a little bit soft, but it is better than rusty one. I am satisfied with the low price and good appearance. View detail
It is the best in the same price range, with many Gauge and good cosmetics.
It is a simple tool, so I chose it for its cost performance. 25 sheets are enough to use. The dimensions are Large and do not seem to be out of order. View detail
just to be sure
I used it on a MONKEY that overhauled the Engine a while ago.
Replaced from OEMBolt at the time of subsequent Oil replacement.
No iron powder was found in the discharged oil, but we installed it just in case.
Reinforcement Type was applied to the other MONKEY.:I made it Aluminum
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA MONKEY125, HONDA DAX, HONDA CHALY, HONDA XRMOTARD, HONDA CT125CT110 HUNTER CUB
For RearMaintenance & Motorcycle Storage
Used on a Grom JC92, absolutely necessary for RearMaintenance.
I am satisfied with the low price and the make of the product.
View detail
Fits: HONDA MONKEY, HONDA Shirley 50., HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA BENRY CD50
It gives me peace of mind!
Used for SUPER CUB6VCamouflage MeEngine.
We replaced it at the same time when we installed the KITACOLight bore up88cc.
A 2mm Drill blade is also included, which is very kind.
I was afraid that it would fall through, so I put the blade on the Drill and turned it by hand to Penetrating it.
I am not sure of the effect, but I feel that the temperature of the Engine is stable and I feel more secure.
Since the clutch needs to be removed, we recommend replacing it with a reinforced clutch at the same time.
View detail
CUB Chinese Engine88cc
Replaced the Carburetor that came with the Chinese Engine.
I was satisfied with Large because it got better just by pimping it out.
It was a nice shopping experience.
View detail
It is not a tool that is used so much in Private, but …
I had a Pin type Holder, but I bought it just in case.
It was more solid than I expected and the desired work went off without a hitch!
View detail
I appreciate the ReserveCook.
There is no Reserve in RigidMONKEY or 4LMONKEY's Normal cook.
In the past, I had to go to the trouble of replacing the cook's mounting part with M14 to install a cook with reserve, but this cook can be installed as is, which is a big help.
Especially in the case of 4L, the normal cook is downstream, so if the carburetor is PC20 etc., it will interfere with the cook.
However, this Cook is a Right out, so I'm going to make that point. [Color] You can Clear.
I don't have any problems with installation or usability, but I don't like the fact that Packing is so poor.
Gasoline may leak if it is tightened a little too much.
Nevertheless, I appreciate ReserveCook.
View detail
Fits: HONDA MONKEY
MINIMOTO MONKEY TYPE C STD Exhaust System Φ28mm Chromium Plating
Acquired for Honda Monkey. It's been a long time since I've thought about replacing the muffler. MINIMOTO liked the exterior (a huge plus in similarity to the original muffler). There are minor questions about lacquer treatment, but overall everything is very kind. I was delighted with the completeness, the whole range of necessary metizas and gaskets. The installation went perfectly (I think even the schoolboy will manage). And to the question of sound - it is beautiful, light and soft bass. I'm happy with the result, sorry I couldn't find a similar offer for the second moped (Honda Little Cub)... View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Reinforced Rear Shock MINIMOTO
Acquired for Honda Monkey. The original racks weakened, did not hold the load, in motion there was a palpable swing, again tired of the appearance. Also wanted to raise the back slightly due to the installed non-original low seat. The choice fell on reinforced racks of extended length (280mm) MINIMOTO. I liked the quality. Simple installation. The end result satisfied the expectation. I recommend it! View detail
Fits: HONDA MONKEY, HONDA DAX70, YAMAHA Yamaha50ccScooter, YAMAHA GRAND AXIS, YAMAHA JOG90, YAMAHA AXIS 90, HONDA LEAD 90, HONDA MONKEY, HONDA Honda50ccScooter
Solidly built
Purchased for disassembly of Clutch.
It is well made, and although I purchased it for the Clutch maintenance of the Address100, it is still a generous Size and can be used for the MAJESTY250.
The shape is designed for use with Wrench, and it can be easily disassembled and reassembled.
View detail
Recommended
The product is very cheap compared to other companies' products, and it is easy to install because of its quality, strength, and because it fits the vehicle EXACTLY. I was worried because the color was red, but when I installed it, it did not look out of place and I liked it very much. View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 70, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
It can be used without modesty with OEMs.
The color is different from the OEM, but I think they are exactly the same. I don't know about the durability, but it is sufficient for my needs. View detail
Used for Clutch Cable!
Used for Clutch Cable of GB250 CLUBMAN.
I used an injector because the lubricant would fly out if injected as is. The GB250 CLUBMAN is not a heavy clutch, but it feels smoother. If you have an old car and the clutch is heavy, I recommend you to use Injector because the lubricant will spread to the whole Cable.
View detail