Reviews
Required Items
Essential equipment for SS that performs strong breaking, and the ability to withstand the front endurance is exceptional.
It has been about 12,000KM since the installation and I am relieved that the yellow tinted black spots I was worried about are not so bad.
View detail
Is this United StatesQuality?
Purchased this for my Z125Pro. The one I received was defective in that the adhesive was taken away by the backing paper. I immediately took a picture and contacted them and they handled it as an initial defect and sent me a replacement within a few days (although it also took a few days from the time I contacted them until they started to respond…). The replacement looked fine, as did the adhesive. However, when I finally tried to install it, I found that the Quantity:Pair (for Left and Right) The shape was different in I thought it was another defective product, so I compared it with the first one I received, which I had not yet sent, and found that it seemed to be Quantity:Pair (for Left and Right) The unevenness seems to be a spec. I had no choice but to cut and shape it myself and installed it. It was a little problematic, but it seems to help the Knee Grip. I think the price of 12,100 yen is still expensive. View detail
Fits: HONDA NC700X, HONDA NC750X
It seems to be effective ….
I bought this to keep my butt from gapping and coming forward from the Seat when I ride my NC750X.
I think it is effective because I feel less pain in my calves and knees when I ride without much awareness of it compared to before.
Since there is no Instruction Manual for pasting, I referred to the product introduction pictures on webike and traced the area where my thighs, knees, and shins come in contact with the pad with a pencil, straddling the motorcycle, and pasted the pad according to the line (If I pasted the pad as shown in the introduction pictures, the longer pad would not have enough area to contact the base of my thighs. (If you paste the pad as shown in the introduction photo, the longer pad has less area where it contacts the base of the thigh, so I used the Quantity:Pair (for Left and Right) pasted in reverse.)
I thought the price was too high for the contents, but I'm glad I bought it because it seems to be effective.
View detail
Fits: DUCATI PANIGALE, DUCATI SUPER LEGGERA
For STREET as Naming, moderate Grip
Previous MODEL to 959 Panigale (without Cowl part) I have driven about 16,000 km in 3 years after installing the I am not sure how effective it is because it was almost a break-in run before I put it on. The other THRUXTONR had a thin tank and no matter how much I tried to hold it with TextilePants, it was not good enough for breaking. I had already felt its effect, so I planned to install it on my Panigale even before it was delivered to me. I had already planned to install R&G GripSeat on Panigale before it was delivered to me, but the surface of R&G GripSeat was textured and there was a lot of damage to Pants, so I chose Stomp Grip for Panigale. The aggressiveness to the wear is also low. I have a 171cm short leg, so I cannot benefit from the Normal step because my thigh does not reach to the position where it is attached. So far, there is no wear and tear on the Yellow Bears or the material, and the durability is excellent.
Considering the hard braking etc. in circuit driving, I might want a little more bite. But it is enough for street driving as Naming.
I wish it were a little cheaper.
I am pondering what to put on the additional STREET TRIPLERS.
View detail
Tank Pad is Stomp Grip
As expected from Stomp Grip, there is no mistake in the construction and performance.
I can't even go Touring without it.
Leather pants and leather suit with good grip and a little bit of Damage.
Jeans might hurt your legs.
View detail
I cut and pasted it.
I bought it in Black
Since it is Universal Type, I cut it and put it on the area where my knee and thigh hit.
Knee Grip Pad has been a common Material:I used to put the Carbon Style ones on, but they were in a fixed position and didn't fit my knees…
Grip power is sufficient for the need.
It is easier than not putting anything on.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Stomp GripTank Pad
We considered other manufacturers, but the Stomp Grip was the right choice. The adhesive is strong and the gripping force makes it easier to grip my knees. View detail
Diversion to other models
Installed on a GSX150BANDIT.
Of course, since there was no match, the zx-6r 07 was relatively close in shape, so I used the original CuttingLine and cut out the unnecessary parts.
The product is sure, but it is still expensive.
View detail
Purchased Stomp Grip for New Model GSX1300R HAYABUSA.
I used Mutsu Mutsu Type? for my Type 2 GSX1300R HAYABUSA, but I bought this one for my Type 3 GSX1300R HAYABUSA. The surface is quite "Tame." I moved the Motorcycle into direct sunlight in late autumn, warmed up the Tank and Pad a little and stuck them patiently while pushing out the air a little at a time. Finally, I tapped them with a clenched fist.) It went on perfectly! 〜Test Result - The snagging is so-so. It may be less painful than Type, but it may be better for easy cleaning.
The type of the "mussel" is like a Fuji pressure point, so if the inside of the hole was dirty, it would be Out….
View detail
If you want to drive on public roads, stomp more than HRC.
I'm not sure what is written in the English version, but I'm not sure what it says.
Translation (I thought it would come with a Capture and Instruction Manual, which you can enter here)
I was disappointed with the product only. same as HondaOEM
I felt it was the way to do it, from my personal subjective point of view.
With HondaOEM, you can inquire and they will mail it to you.
This product is good, but it is Made in USA.
It seems a little unfriendly.
View detail
Fits: BMW S1000R, BMW S1000RR, BMW M1000RR
Stable Stomp Grip
I tried many things, but Stomp Grip still feels right.
I know Air thinks he's being careful not to bite, but I can't do it.
View detail
I bought the wrong one and made the wrong decision, again.
This Stomp TankGrip is a double-sided tape that quickly
When you remove the backing paper, the double-sided tape sticks to the backing paper.
The double-sided tape is stronger than the double-sided tape. Double-sided tape is stronger and more durable than double-sided tape.
The surface design is not very good.
View detail
Double-sided tape was defective and I bought it three times.
This item from Stomp has a defective Double-sided Tape.
2020 Part number 55-14-0177C manufactured in 2021 with the mount removed.
Double-sided tape remains on the backing and the product cannot be applied properly.
This time, when I bought it at Webig, I finally got a decent product.
Double-sided tape with strong adhesive from 3M was also used.
It was used and even the design was changed.
I think the current design is dodgy.
This solved the problem.
View detail
Difficult to peel off from the backing paper.
Since it is MADE IN USA, the glue of the product sticks to the backing paper.
When I removed the backing paper, the glue peeled off on the backing paper.
Even if you put it on, it will peel off.
[Color] The color is Clear, so it is quite noticeable.
I want it improved!
View detail
Knee grip
Adhesion is good (I let it sit for 3 days after putting it on)
More togetherness during the Knee grip.
View detail
Secure Grip
Installed on a GSX-R1000R 2019
This is the standard Stomp Grip in the Traction pad.
It was put up as soon as the car was delivered.
ICONType for those already attached (The protruding shape is the Manufacturer logo.) Grip power was nowhere near as good as it was in
It's peeling and becoming stained.
Therefore, we are pleased to announce that VOLCANOType (Protrusions are mountainous) The new tiles have been replaced with the
I think it is simply the difference between new/used products, but new products are very transparent and beautiful to the eye.
Also, the projection pile seems lower than the one I put on another beloved car less than 10 years ago, but it is still more slippery and feels better than the ICONType.
With ICONType, we were concerned about the forward drop during deceleration, but the replacement with this product has reduced it to Large width and helped to improve fatigue.
Here are some general notes on the Stomp Grip.
If you are concerned about air biting after application, we recommend using Black.
The basic process is just positioning and attaching, but for a one-shot deal at this price, clumsy people should ask someone else to do it for them.
If your tank has a Carbon Tank Cover or other large tank covering, you will need to cut it so that it can be released. Consider this carefully before peeling off the release paper.
Uneven areas are prone to peeling. Make the best effort to leave it for the longest time possible. (In the case of R1000, the Tank side cover part tends to peel off.)
The price may seem high for the contents, but considering that the car is an exclusive design, I think it is within the acceptable range.
Even if you are not a sports rider, the non-slip knee grip will help reduce fatigue when touring, and is recommended for large and mid-sized riders.
View detail
For Circuit
Fitted for Circuit. I have not used other similar products so I can't compare, but as expected, it makes it easier to drive. However, the adhesive is very strong, so you might want to be prepared to never take it off again. I would be happy if the price was a little lower, but since it works, I am satisfied for the time being. View detail
I can't do without it.
I've used it for several years and it doesn't peel or deteriorate.
Well, it is stored indoors and Circuit running Main.
Copy products are cheap, but brittle and troublesome after peeling off.
Don't lose money buying cheap goods.
View detail
STOMPGRIP with replacement immensely Large for slippery Tank
[How is it used?
Mainly city driving, occasional touring, no circuits or heavy driving.
Was the one you received as per Image?
It was larger than I expected.
Was the installation difficult?
Difficult.
How was your experience with it?
The effect was very Large because it was a slippery Tank, and since it was ICON, there was no Damage to the clothing and no pain.
[Was there anything that disappointed you?
None
View detail
Fits: HONDA CBR300R, HONDA CBR250R
You can certainly hold it firmly. ...... but
I bought this one because I was getting weaker in the latter half of the touring and my seat was gradually gapping in the front side.
[Color] Clear was also good, but I didn't want the adhesive tape to show through, so I chose Black.
As for pasting, see the reference image for Quantity:Pair (for Left and Right) It was easy because we only had to paste them symmetrically.
But when I sit down to try it out, it hardly hits my knees. Crying
If you sit closer to Tank, there is a lot of contact there, but if you shift back, only part of the knee is ....
When pasting, please do not refer to the HP image, but paste according to your own Riding Position.
View detail