Reviews
To balance with Rear...
When replacing the rear suspension, I used a RateUp spring to get the balance.
I used #15 Fork oil for the installation.
Spring with the same Variable rate as the OEM, but with a RateUp of about 10%.
I couldn't tell the difference myself. (^^;)
View detail
Fits: HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100
ape100 engine Knock Pin Set
There is no difference from the About quality and textured product It's not used yet. It's going to be used for engine overhauls Recommended if installation difficulty engine disassembly is possible Cost performance and comparison with other products It is easier to buy and use compared to std products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing Since it is an aluminum product, it must be stored clearly I recommend this product if you do engine overhaul View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
SHIFT UP Oil Shower Billet Head Cover
About quality and texture It is light and has a high quality finish About the feeling of use I think I can protect my High Cam Shaft enough Products to buy together SHIFT UP Oil Shower Billet Camshaft Holder Difficulty of installation Read the manual carefully and install the bolt washer Even beginners can easily install it. Cost performance and comparison with other products I understand that the oil inflow is less than other products However, if you install SHIFT UP Oil Shower Bullet Camshaft Holder together, I think we can show better cooling to other companies than products About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing The only oil shower product I can buy now is SHIFT UP, but if you have a high cam installed, I definitely recommend it View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
SHIFT UP Crankcase Oil Seal 4-Piece Set
About quality and texture to have good quality enough quality About the feeling of use I feel like I'm riding a new bike again Products to buy together Clank case gasket Difficulty of installation difficult, hard Cost performance and comparison with other products The price is good and the quality is high enough About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing The engine is old, so I bought it to play overhaul, and I will be able to enjoy riding again in a slightly new mood View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
Oil cooler piping
Used as piping for oil cooler.
It is oil-resistant, pressure-resistant, and heat-resistant, making it ideal for oil cooler piping. Its flexibility makes it easy to handle.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
oil cooler
About quality and texture Sp takegawa could be installed in a special clutch case without any problems About the feeling of use There was no problem installing it The quality of the product is quite good Products to buy together MINIMOTO High Density Banjo M6 Hose Used Together Difficulty of installation be very easy to set up Cost performance and comparison with other products be of excellent quality About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing It's better to know the exact inside diameter of the hose I want to use and buy it View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
oil cooler
About quality and texture Sp takegawa could be installed in a special clutch case without any problems About the feeling of use There was no problem installing it The quality of the product is quite good Products to buy together MINIMOTO High Density Banjo M6 Hose Used Together Difficulty of installation be very easy to set up Cost performance and comparison with other products be of excellent quality About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing It's better to know the exact inside diameter of the hose I want to use and buy it View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
second purchase
I have bought it once before, and this is the second time. The appearance is absolutely beautiful and the effect is good. This time I bought it for a friend. It is a pity that the black one is still discontinued, and the red one has been discontinued. My two favorite colors are not available. , very unfortunate. View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
no problem
The outer diameter is a little smaller than Active etc., but there is no problem. View detail
Fits: HONDA APE100, HONDA APE100 D, HONDA NSF100, HONDA XR100 Motard, HONDA APE100, HONDA APE100 D, HONDA NSF100, HONDA XR100 Motard
makes your bike go!!!
This is one the BEST kits I have ever installed on my motorcycle. It keeps a good balance throughout the powerband and has been very reliable. View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
extend camshaft life
This upgrade will ensure you camshaft will last longer by keeping the camshaft fully lubricated. It also allows running a camshaft with higher lobes without clearance issues. View detail
Fits: HONDA XR100, HONDA NSF100, HONDA APE100, HONDA XR100, HONDA NSF100, HONDA APE100
APE 100
Used for APE 100
Anodized aluminum color is available for the old model.
New products are only available in DuraluminBlack
The color is more than Matte, and if anything, it is like Plastic.
At best, there is a sense of simple luxury that is Race ish!
When using the APEXR100
Front removes Washer
Rear uses the OEM Washer between the Swing Arm and the Slider
The reason is that there are some car bodies that rattle without Washer.
When using the Washer, it is said that the thin Nut attached to the Washer is used even if there is a Nut edge.
This is Manufacturer Inquiry
View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
Few color choices
When I ordered the product, there were only two colors to choose from, silver and titanium, and black was sold out. I remember that I had seen red on the official website of shift up. I hope that the official shift up will be able to renew it. Put red and black products back on the shelves View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
Used for pressure adjustment
It is used for pressure adjustment. It is convenient that it can be used repeatedly without oil leakage if liquid sealant is sprayed. View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
Is that normal?
Quantity on APE Overhaul:I replaced it with a set
If you're going to do an overhaul below the waist anyway, Quantity:I think it's better to replace it with a set and leave it in place.
Last time, the Seal relationship below the waist was just cleaned and put in place with GreaseUp.
After all, Oil blotting has occurred.
So this time we are about to go to full Seal replacement.
Considering the hassle of replacing it later, I recommend working at the same time.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100, HONDA NSF100, HONDA XR100 Motard, HONDA Ape 100
Large odd, satisfying Parts
I could use an alternative, but I think it's actually a proprietary product, the M10 Aluminum Gasket I used another diverted product, but its thickness was too thick and caused oil leakage And the Oil leak is gone View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50
Large odd, satisfying Parts
Probably a completely exclusive product Purchased as part of the Head parts when making the second engine When you think about the fact that it will be twisted off while you are replacing it too much, since it is Aluminum, you will need to use a different method It is safer to buy If possible, the Manufacturer should include the color, Gasketetc Quantity of Contents:This is a product that would be very helpful if you could sell the parts as a single set View detail
Large odd, satisfying Parts
The parts needed during the development of the second engine, which are attached to the current engine, can be used to create a It is possible to use it by removing and replacing it, but it is not so expensive, so I bought it within Because the Material of the part is Aluminum, I think that the anxiety of the deformation etc. will be lost while I am replacing it It's safer to buy when you think about it; Parts image shows Quantity:2pc. Set Shown here is a 1pc. product in reality View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 100, HONDA APE 50
More effective with Shower head cover
I uploaded the photo of the Normal holder I removed. You can see the difference when comparing with product photo.
I supply Osil falling from the Shower head cover to Camshaft efficiently, so I think it is more effective in combination with Shower head. It is a part that buys a sense of security so you can experience it, but it is definitely useful for a SoupUp Engine.
Aluminum Cut-out has very high texture, but obviously it can not be seen from the outside. It is good that you can also do self-man again (lol
View detail
Fits: HONDA NSF100, HONDA XR100MOTARD, HONDA APE 100
When using it, on a case-by-case basis
I used it in APE 100 Engine.
Crankcase On the whole Rose, lay it down (Horizontal placement) I bought it as being available.
On the whole it is a good product, but the hole in the Main stand's Bolt and Case side is slightly misaligned, the Knock Pin on the opposite side of the position of the photo does not go well and a shift occurs in Case. When I forced it halfway, Torque wrench did not work, I screwed the Flange bolt for matching Case. After that, I unloaded Engine once.
Clutch It is very easy to use if you have to replace it, but be careful when using Case breakdown. Do not tread the same rut.
View detail