Reviews
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
VINO125
[How is it used?
Town ride
Was the installation difficult?
It was totally easy.
How was your experience with it?
Good quality
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
I was resistant to Funnel, but ??
I was afraid that the Funnel would suck in Dust, Garbage, etc., but I am not worried because of the inner and outer double Net and the Sponge-like Filter. 。 The air is more beautiful than the previous Power FilterSpec. The best thing is that it is lighter than that, and it is a recommended point as a vibration countermeasure for 2-stroke carburetor. ?? View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
It's cute, cool, and practical!
It was difficult to step on the rear brake, so I installed it as a trial, and it became easier to step on than I had imagined, with great effect.
It looks cute and cool Custom feeling, and I'm Large satisfied with it, even though I installed it as a trial...................
If the price were a little lower, there would be nothing to say, but after seeing the product's construction, it was a good one at a reasonable price!
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
great satisfaction
It has good quality compared to quality and texture information prices It's good to operate the back brake for the feeling of use It's easy to install Satisfied with cost performance and comparison with other products at half price for Kitaco products WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing Can only be installed on theStd rear brake shift I installed this product and my friend liked it View detail
Fits: HONDA Ape Type D, HONDA little cub, HONDA Ape 100, HONDA CUB [CUB] Super Cub (Custom 12V), HONDA CUB [CUB] Super Cub (DX 12V), HONDA CUB [CUB] Super Cub (Standard 12V), HONDA CUB [CUB] Super Cub (Business 12V), HONDA Ape 50, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA little cub, HONDA Ape 100, HONDA CUB [CUB] Super Cub (Custom 12V), HONDA CUB [CUB] Super Cub (DX 12V), HONDA CUB [CUB] Super Cub (Standard 12V), HONDA CUB [CUB] Super Cub (Business 12V), HONDA Ape 50, HONDA Ape 100 Type D
Available in a choice of colors and a little cheaper than OEM.
[How is it used?
We took over a LITTLE CUB that had been neglected for a long time, and replaced the parts in the process of maintenance and restoration.
The old CUB series I have inherited in the past have either footpeg pushing up at an angle due to Large body tipping, and the footpeg rubber is sticking through. This symptom is noticeable because many of these vehicles were owned by elderly people to check the water supply in the rice paddies or to run errands in the neighborhood.
The exterior of this vehicle has a lot of rust, and the frame and exterior were painted accordingly, so I wanted to use brown Footpeg Rubber for the color scheme, so I chose KIJIMA products.
Was the one you received as per Image?
It's not thick or thin, it's just right. Brown. The color was just like the Image.
Was the installation difficult?
Before the parts cleaner is evaporated, insert it into the base of the footpeg and push it in by hitting it with a rubber hammer to complete the installation easily.
It may be easier to work in the summer than in the winter when the temperature drops and rubber becomes harder.
How was your experience with it?
The product has the same shape as the OEM, and the treads are Large size to absorb various vibrations adequately.
If you are not dissatisfied with OEM Footpeg Rubber, this is a good product that will not dissatisfy you as well.
[Included Parts:were they on?
Footpeg RubberQuantity:Pair (for Left and Right) 1Quantity:Set and one Instruction Manual are included.
[Was there anything that disappointed you?
If you don't like OEM Shape, you probably won't buy this product in the first place, so I have no complaints at all.
Other items that would be helpful
Point and hang of installation
One method is to install it as described above, so if you know of another method, we recommend that you implement that method.
It may be more troublesome to remove the old footpeg that is now attached than to install it.
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is enclosed, and the product is easy to understand as it only requires the old Footpeg Rubber to be removed and then installed in the reverse order.
[Notes]
Depending on the method, some of the work may be done by force, so please be careful to avoid injury.
[ITEMS TO BUY TOGETHER
If the footpeg, handlebar grip, and kick pedal rubber are all the same color, it will give a sense of unity, parenthesis, and cuteness, so please enjoy your own personal sense of style, including using different colors for everything.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Purchased for APE100 PD22
I had been using an Indicator from Mukawa, but it had deteriorated over time and was sucking secondary Air, so I bought it.
We also compared Mukawa, but decided to go with this one, which has a good reputation in Review.
I'm assuming it's consumable since I'll be attaching and removing the Carburetor for setting, but I'm hoping it will last a long time.
View detail
คอยางนิ่มใส่กลับคอคาบูเรเตอร์ได้พอดี ทนต่อน้ำมันเบนซินได้อย่างดีไม่ขาดง่ายใส่กลับคอไอดีได้อย่างพอดีและทนทาน View detail
เป็นคอยางที่ดีมีคุณภาพอย่างดี View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Difference between K507-602 and 604
48mm is already a Quantity:I've bought about 5pcs. and have no complaints at all, so I have high expectations for this one too.
With Mukawa and Minimoto, the Crack cracked and ended up not lasting a month, but with KIJIMA, several years are assured.
The most important thing to remember when assembling the Bolt is not to overtighten the Bolt.
The 48mm 1pc. was over-tightened, distorting and ruining the reinforcement plate inside.
By the way, besides this K507-602, there is another one called 604, but no one has mentioned what exactly is the difference.
The difference is the shape and position of the mountain that fits into the anti-dislodgement groove on the carburetor side.
This 602 is made to fit KEIHIN grooves as it says it is PE28 compatible.
When viewed from the carburetor slot, the mountain is slightly triangular in shape and deeply attached.
PWK28 is the same, and a small CR or FCR carburetor body can also be attached if it fits.
And 604, but it is VM/TV26 compatible and the mountain is round and attached in a shallow position.
TMR28 also seems to fit.
I see that the Rib dimension in Mikuni's Spigot ring dimension chart is different between KEIHIN and Mikuni.
There is such a difference, so make sure you buy the right one.
Especially note the carburetor that can be replaced by a Spigot.
Well, I think KIJIMA is a bit unkind… The dimension chart looks the same for both with a 35mm mounting diameter.
AlreadyQuantity:1pc. if you have a picture.
By the way, Hi-Chi Trading had a picture.
Good luck with WeBig.
View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
Easy installation
The paint is thick and does not peel off easily. The installation is a universal product, so I was able to adjust the position slightly. If you want to put it on a standard down fender, you need Bolt and Nut.
I am glad I bought it, even though it will be an invisible part of the Parts.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Easy to use
Easy to install, stable and easy to use View detail
![Front Fork Boots]](https://img.webike-cdn.net/catalogue/images/27481/206-020_TS.jpg)
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
Installation on gn125h
I installed it on a gn125h.
It also improves the appearance and prevents Fork rust.
View detail
Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA diocesan, HONDA Spacey 80, HONDA Journo Clare, HONDA jazz, HONDA gyro X, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA livudio, HONDA Livudio SR, HONDA Livdio ZX
Old Scooter Parts
Used for Eve Smile. I was dissatisfied with the grip and after changing it, it is easier to ride Stress. View detail
Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA Benly CD90, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90, HONDA DJ-1, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Benly CD90, HONDA Benry 50S, HONDA Benry 50S, HONDA cabina, HONDA Benly CD50, HONDA Shirley 50.
Old Scooter Parts
Used for Eve Smile I was a little dissatisfied with the OEM Product, after changing to Stress it is easy to grip and fun to drive. View detail
Fits: HONDA NE50 Tact, HONDA XR50R, HONDA Gyro X, HONDA Super Cub 50 Super Custom, HONDA Super Cub 50 Standard, HONDA Super Cub 50 Deluxe, HONDA Super Cub 50 Business, HONDA Super Cub 90, HONDA Smart Dio, HONDA Smart Dio DX, HONDA Zoomer, HONDA APE100, HONDA APE100 DX, HONDA APE100 SPECIAL Knife, HONDA APE50, HONDA APE50 DX, HONDA APE50 SPECIAL Knife, HONDA CD50, HONDA CD90, HONDA CD90
Old car 6BoltCUB
6Bolt old car CUB I have been wanting to use it for some time and purchased it. It is easy to grip Stress eliminating Touring will be fun. View detail
Fits: HONDA Super Cub 70, HONDA MD50, HONDA MD70, HONDA MD90, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Little Cub, HONDA Benly CD90, HONDA Benly CD50, HONDA press cub, HONDA solo, HONDA Ape 50, HONDA Ape 100, HONDA XR50, HONDA XR100, HONDA DAX, HONDA Chaly, HONDA Little Cub, HONDA Benly CD90, HONDA Benly CD50
Is it an individual difference….
The rubber on the Brake Side was easily replaced, but the Shift Pedal side seemed to be made much tighter and could not be inserted all the way in.
The quality is solid, and considering that it is a consumable product, I think it is sufficient.
View detail
Fits: HONDA APE 50, HONDA APE 100, HONDA FTR223
Handy!
Blinker Bracket can be used in a homemade process, but it's not a problem.
It feels more solid and comfortable if it is designed specifically for it (laughs).
It's not expensive, and considering the finish, buy this one!
View detail
KIJIMA
Used for APE100 The male terminal coming out of the switch from the beginning is a small terminal used by Honda, so there is no need to change it. The person using it with a car model other than Honda thinks that it is loose when put on. Because the wiring is thin, it is not suitable for a switch for large-capacity electrical equipment such as headlights. Please be careful that much. ------------------------------------------------------------ -------- Use in the APE100 from the beginning of the switch is a small terminal used in Honda, so you don't need to change it. If you use it as a model other than Honda, you think it's loose when you install it. Because the wiring is thin, it is not suitable for switches for large full -capped electronics such as headlights. Powered by Google Translator View detail
Fits: HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
cool!
It's nice, but the size is not right, so it's a product that makes you worry while installing ------------------------------------------------------------ ----- It's cool, but it's not perfect, so it's a product that makes you worry about installing it. Powered by Google Translator View detail