Reviews
Fits: YAMAHA SR500, YAMAHA SR400
First of all, I'm satisfied.
I regretted that I should have chosen this one over DAYTONA from the beginning, but the fact that it can be installed even with Y's Gear's Rear Carrier is highly appreciated!
I can't help but feel that prices are high due to the high cost of living, but … I hope you do your best with the prices, etc!
View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I am satisfied with the Retro place.
In installing the Side Back Support bar, the common design of DAYTONA's
I wanted to make a Retro one to match my W800, not a W800. Found this product.
I knew it would be expensive and the delivery time would be long, but I really wanted to put it on.
We placed an order and waited 4 months for delivery and finally received it.
I put it on and was satisfied with the quality of the texture as expected. But the price is a bit high and
I gave it 4 stars overall because of the long delivery time.
View detail
Nice exhaust
Well-looking exhaust with nice (but not loud) sound. There is just one heat shield for rider, and nothing for passenger. I know they are exist, but i had not found the way how to order them additionally. Also i wanted to play with mufflers sound, but could not pull out the catalysts. Installation was easy except the problems with original yoke/baggage system. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Unique products that cannot be found anywhere else
The kind of product you'd have to be a big fan of to get your hands on
Even though it is called a carrier, it can only provide a very small space But if you have rain gear or CampingMatte, for example, you can strap it on
It is hard for the wrench to enter the large though it tightens at the base of the installation of the meter I'm at a loss as to how to tighten it up …
Also, it seems that a little time has passed since it was manufactured, and the surface of the Stainless Steel is a little cloudy But that's nothing if not polished
Overall, I'm glad I bought it
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Relocated for Side Back
I installed it on my SR400fi, and the OEM Blinker is in the way of the Side Back So I relocated it and installed a DAYTONA Small blinker
I saw some imprecisions struggling with the wiring, so I asked Large People Shop for help
I took it to the Reflector with a partial exposure, and then took it to the back of the Reflector & rarr; Fender back side The attached Wiring was not long enough, so I had it extended The attached Wiring Tube has been changed to Spiral Tube
I like the look and feel of the Refreshing
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Sorry to just being able to do, so so so.
Although it took time to deliver, the expectation degree was high, but as the finish was very good, the welding of the installation Nut could be taken with only two Tourings and the Bolt dropped down and Case hits Chain Trouble It is very disappointing that I have happened. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Exhaust pipe fixing is absolutely necessary!
Although it was Repeater, it used to be a One Size Large Band that can easily be tied up easily this time although it was previously attached with a normal Size Band.
Depending on the outer diameter of the Exhaust pipe, it may be difficult to install, but if you install the Bolt to the Frame and make it Offset, you can install it without any burden on each part.
If you do not install it surely the Bracket of Slip-on Silencer will break.
Especially when traveling on highway it is caution.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W400, KAWASAKI W650, KAWASAKI W400, KAWASAKI W650
It became pretty Parenthesis better
OEM's Chain cover is Material : Design was not so good at Plastic, so I bought this product that was good at Net.
I exchanged Cover at the same time as Gold chain, but as Chain got better looking, it was a little expensive but I am satisfied.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For relocating Blinker when attaching Side bag
Both Blinker and Tail light use OEM.
If I stop at a signal wait or the like, it is horribly blinking Blinker & Rear Fender and I feel like shrinking the lifespan of related parts remarkably. As stated in Manufacturer's item description, Light Company Small blinkeretc of Other Company Product. It is better to use.
Because Wiring can not avoid for Edge in the base of Tail light, I think that it will break sooner or later.
Used only when necessary, the usual way to use is Recommendation. If you plan to wear it permanently, you need a little ingenuity.
The goods themselves are finished with beautiful welding and I think they are beautiful. Please be careful not to make a mistake at the time of installation.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
When removing ChainMaintenance and Rear wheel ...
I bought it because it is troublesome to remove Exhaust pipe, Silencer one by one to attach OEMCenter Stand.
The exhaust system I am using is GreenBrowntechserfu.
I thought that it would be installed without removing the Exhaust System, but I removed a part of the Exhaust pipe and the Silencer because it did not work well on the Spanner.
Installation is very easy.
As it is also in OEMCenter Stand, it will be out of the time signature that moved, so let's lock the Front brake using Rubber Band, Tie Wrap, Belt etc..
How to apply STAND is similar to OEM.
This makes working easier.
(The picture is under installation)
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
I'm almost satisfied.
Very cool.
OEM's unnecessary has gone, and the appearance has become clearer.
Even an amateur 's myself could exchange easily.
Other people are also written, but Minus is the place to divert OEM's Rubber parts.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Lighter appearance
Because the original Chain case was rusty
Replace with this product.
As an advantage
○ It became light even from the appearance.
○ Rusted for Stainless Steel.
○ Also supports Suspension exchange.
As a disadvantage
○ The gap with Sprocket stand out (The picture is 520 - 44 T)
OEM's thick steel Cover is also nice, but it looks light
This item is also good.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
I like it ~
It was easy to install and I was satisfied with the appearance. It's cool even without Side Back. Because Seat fixed Bolt is used, it may be a little worrisome when desorbing Seat. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender will be firmly fixed to a Frame by a Stainless pipe as a result. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although he bought an external Exhaust pipe, uneasiness to fixation -- Are such parts sold too? Although making is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is -
Although he bought an external Exhaust pipe, uneasiness to fixation --
Are such parts sold too?
Although making
is solid and safe, only a few becomes outside and interference of management of a Muffler only a Rear brake pedal and a few (it is --, as it fell before and the Pedal had bent.)! The Pedal was reconstructed more highly and it became good for the time being.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
At the time of a Touring, it purchased in order to carry out seat back fixation. Probably attachment will be easy. Can anyone do it? Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 o
At the time of a Touring, it purchased in order to carry out seat back fixation.
Probably
attachment will be easy. Can anyone do it?
Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 of Japan circumference of the load (it appeared in the sheet one third) of 10 kg or more as for which the maximum loading capacity of 3 kg exceeds.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Although it was the first Muffler exchange, it is a good sound as expected. It is not too noisy and is also likely to arrange an automobile inspection as it is. It is satisfied with the Beauty structure of details. It is recommended in a direc
Although it was the first Muffler exchange, it is a good sound as expected.
It is not too noisy and is also likely to arrange an automobile inspection as it is.
It is satisfied with the Beauty structure of
details.
It is recommended in a direction not to break down the Style of the
NORMAL into.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
[ -- the Webike Monitor ] -- since the Exhaust pipe of the same path was good, it used at this that it was pure. Since it is not a double tube if it compares that it is pure, it is very light. Since the Pipe is thin, appearance merely get
[ -- the Webike Monitor ]
-- since the Exhaust pipe of the same path was good, it used at this that it was pure.
Since it is not a double tube if it compares that it is pure, it is very light.
Since the Pipe is thin, appearance merely gets somewhat bad.
attachment of
attachment is [ short vehicles of the Stud bolt to 94 models ] possible without exchange of a Stud bolt also for the short vehicles of the Stud bolt after 95 models -- as (direction of a Flange is changed and attached) -- it has become.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust p
Since I exchanged for the external exhaust pipe, a three-point stop was used just to make sure. I think that it is effective since it is a large motorcycle of vibration. The vibration after attachment decreases and it is good. In the case of the exhaust pipe of the same length as genuine, the band and stay which stop an exhaust pipe and a muffler are fastened together, but it was somewhat difficult to insert stay in a band. View detail
Fits: YAMAHA SR500, YAMAHA SR400
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved. Since it is interfered with the flasher of rear when the larger side bag was attached, I made and relocated the hole to the genuine bracket with the drill (refer to photograph). Since a transfer bracket is also sold from the same company, if you don't have a confidence to process, I recommend it. Although I feel it is expensive a little, considering the tool and pay of processing, I think that it is cheap. Sym'z Craft: rear blinker transfer bracket http://www.webike.net/sd/9737648/10001001. Although the back support of Kijima is used usually, it cannot be equipped with a genuine carrier (type2) simultaneously. For those who is thinking to attach simultaneously, please be careful only this point. (Although the spacer was forcibly attached together with a genuine carrier, back support has been distorted later) KIJIMA Saddle bag support: http://www.webike.net/sd/1678414/" View detail