Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR KRT EDITION
You can't have BALI.
When I tightened it immediately, it did not go in immediately, and when I took it out and checked the screw threads, there were many BALI and I had to shave them off with a file. After shaving, it went in smoothly to the end. Naturally, the anodized part was peeled off, which was unfortunate. The part will not be visible if it is tightened, but it was a shock to the manufacturer whom I trusted. I thought about returning it and exchanging it, but I decided not to because I thought I would receive something similar again. It is not a cheap product, so I wanted BALI to take care of it. View detail
Yep for me it works
Yep, in the case of my bike, this item works as advertised. Shifting feels more solid & deliberate. Easy to install so long all the bolts on the bike that need to come off, do so without putting up a struggle! View detail
GEAR loss will be eliminated.
I no longer have to go into Neutral.
I am very satisfied.
View detail
Certainly the vibrational frequencies are thinner!
Compared to before installation, the ThornThorn-like vibration between 3000 and 4000 rpm has become a little more mild. I would like to install a heavy bar end with Plus alpha from now on.
For your information, the product number is AT-W0006A for S1000RR to 18 years old cars.
I initially purchased AT-W0007 by mistake. The←s product is for S1000RR '19 and later.
View detail
Feet are Drill and determined.
[How is it used?
Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It was easy.
How was your experience with it?
Beautiful feet.
[Included Parts:were they on?
Yes
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RSCafe
Installation is quite easy!
[How is it used?
QUAD LOCK was selected to mount the phone when Touring, and this one was selected with a 1InchBall stacked on top of it.
Was the one you received as per Image?
Yes
How was your experience with it?
There is nothing wrong with that.
[Points to note]
Tightening Torque:30Nm
How did it compare to other products?
So far Kaedear." and did not feel inconvenienced, but wanted to make the Handlebar area Compact.
Other items that would be helpful
Observe the installation point and hang/regulation Torque:30Nm
Items to be purchased together/The intermediate mount that connects this Body to the QUAD LOCK is required separately.
I reused my previous kaedear intermediate mount
( https://www.webike.net/sd/25611697/)
Opinions and requests to Manufacturer/None in particular.
View detail
The atmosphere changes when viewed from a distance.
Cap of RadiatorCap.
This is the only place where it is commonplace to have fully functional parts, so even if the surroundings were made of carbon parts, there was no color here.
However, there were no elaborately designed cap covers for complete decorative purposes in my favorite design.
CoolCap." I tried to find the "Mere Old Man" but there was no way to find it.
The surface treatment of the RadiatorCap had just started to fade, and I went to webike to get a new NORMAL and found this.
The exquisite texture of the machine processing, the discreetness of the design, and the subtle hilliness of the overall design to prevent water droplets and dirt from accumulating.
AELLA is the best in the market with its high precision installation.
Although it is a small component, it strangely gives the Motorcycle an enhanced overall texture when viewed from the side.
The price is a bit high, but looking at the photo of the TYPE 2, which was cut from a solid piece of wood, I think it can't be helped.
Finally, my RadiatorSide cover is made by Moto Corse and is designed along the Cap with no interference at all.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS cafe, KAWASAKI Z650RS
OEM Product's plainness was unacceptable.
I have nothing to say. I chose this one because I wanted it to be gorgeous and I wanted it to match the Champagne gold line on the Body. View detail
It is harder to GEAR out.
Gear changing Touch is better. View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Effective for moving in the vibration range.
[How is it used?
Grip vibration reduction during driving
Was the one you received as per Image?
Exactly the same as the one in the photo shown.
Was the installation difficult?
It is very easy to remove the Bar End and install the collar.
How was your experience with it?
It does not eliminate vibration when driving, but it changes the rotation range at which vibration occurs.
Vibrations have been considerably reduced when driving except at high speeds up to now.
However, the vibration has not been eliminated, although it has been reduced,
If the situation remains the same for a long time, it will remain painful.
People who think this product is good for different people have different normal use RPM range,
There seems to be a clear division between those who think it is not effective at all and those who think it is not effective at all.
One Side of the collar has a Ring-shaped stripe, but the orientation is that of outward mounting.
The appearance is simple and thin, so it is not noticeable and does not feel like you are wearing it.
The construction itself is very nicely made and of very good quality.
[Included Parts:were they on?
Because it has a resin color that matches the Bar EndMounting Bolt,
To be used in accordance with the type of car.
A brief instruction manual is included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Even though the material is Titanium, I would like to see a lower cost.
It's not bad as a thing, but I think lowering it a bit would make it easier to get a good deal on a bad one.
Satisfaction level 3 in terms of Cost
View detail
Very good as Design
[How is it used?
Aiming to reduce Damage in the event of a fall
Was the one you received as per Image?
No different than the photo shown.
Was the installation difficult?
Because it is to be installed inside the exterior Cover (Cowl) from the 2023 model year,
Installed by Dealer.
How was your experience with it?
I hope it is never used because it falls over and exerts itself.
It looks very good and can be a dress-up.
Red and Blue Anodized are available.
It is very good that it does not stand out badly due to the thin Ring line.
The structure itself is also very beautiful.
The surfaces do not protrude too much, so they do not get in the way.
When there was a Damage, I was told that I could purchase the parts Single Body from AELLA,
Maintenance afterwards can also be assured.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH Daytona675, TRIUMPH STREET TRIPLE 85, BMW S1000RR, BMW S1000R, Others Screw diameter:M8
Slider and Stand Hook
[How is it used?
Used as a Slider and Stand Hook for the rear section
Was the one you received as per Image?
No change from the image.
Was the installation difficult?
Installation is very easy, but the screw holes are made of aluminum,
Care must be taken in Torque management, as screwing in too much will make the screw holes ridiculous.
How was your experience with it?
The shoes are just right and look great when worn.
Screw mounts are available in Red or Blue Anodized.
The inlays of the Outer and Anodized sections are very precise and perfectly designed.
Be careful not to put it in at a bad angle, as you may bite it.
Anodized processing is also very clean.
The engraving is likewise very clean.
All of AELLA's products are extremely accurate.
As a Slider, I would have to fall over to know for sure, but after examining it, it seems to be doing its job well, so I adopted it.
It can also be used as a Stand Hook, which is very convenient.
[Included Parts:were they on?
A special Mounting Bolt is included.
A simple Instruction Manual for handling is available.
[Was there anything that disappointed you?
Nothing in particular. Perfect.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Slider
Slider installed.
After removing the Side Cowl, remove the Under Cowl.
After supporting Engine with Jack
Remove the Engine Mounting Bolt.
Base plate is co-tightened with attached bolt
Cowl back and SliderBody fixed.
The RS660 Cowl has no extra wiring.
(Note only the Wiring of Under Cowl's Shift Pedal)
It can be easily removed, and the work was completed in about an hour while reading the accompanying manual.
Tools required are
Hexagonal Wrench (Cowl removal Short Type is useful in some places)
13mm Socket (Engine Mounting Bolt removal)
Torque of T25 (Reverse side of Side cowl)
8mm Hexagonal Socket (with attached Engine Mounting Bolt tightening torque specified)
6mm hexagonal socket (with SliderBody tightening torque specified)
It would be nice if the
Clearance was fine and the texture of the Anodized Treatment was good, I would recommend this product.
View detail
Radiator protector for high strength and ventilation
Radiators are placed in windy locations to improve cooling efficiency, and windy locations are also prone to flying rocks and insects; if the RadiatorCore is crushed, the cooling effect will be reduced and it will not look good.
That is where Radiator protector comes in.
AELLA Radiator protector The center of the case has a fine mesh and the edge of the case has a coarse mesh, so the center is well guarded and the edge of the case has a structure that improves ventilation. Steel, which is highly resistant to corrosion, is used for the material, so it will be robust enough.
In the case of R1250RT, the front cowl is removed for installation, so it is quite large.
View detail
Position change
The nut holding the handlebar was very torqued!
After replacing the Bolt, the process was very easy and the Wires were fine as they were!
I think the Position will go up a bit and it will be easier.
View detail
Simple
Simple and Parenthesis good
Installation was also easy
View detail
AELLA footpeg for Ninja1000sx is the best!
Ninja 1000sx 2023
As a person who has a style of riding on a footpeg, I was dissatisfied with the OEM footpeg that felt so squishy that it looked as if it might break. I was dissatisfied with OEM footpegs that were so squishy that they looked like they might break.
View detail
Even an amateur can feel the effects.
There are similar products from No Brand, but I chose AELLA's. Even an amateur can install it easily and feel the effect immediately. The price is not cheap, but I am satisfied with both the quality and the effect. View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI SCRAMBLER 1100, DUCATI PanigaleV2, DUCATI PANIGALE V4 S, DUCATI 959Panigale, DUCATI PANIGALE V4, DUCATI 899Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
I think it is more effective than I had imagined.
I have only installed it and have not yet driven the wheel, but when I run my hand around the wheel, it turns more lightly than before the change. I could imagine that the overall improvement will be achieved by accumulating various small changes like this. View detail
I don't want to confirm the effect, but
The workmanship precision of the product is quintessential.
I wish I could spend time as Dress-up parts without knowing the effect.
View detail