Reviews
Fits: DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC, HONDA XL500R, HONDA XR350R, HONDA XR500R, HONDA XRX200R, HUSQVARNA TC610, KAWASAKI KL250 A, KAWASAKI KL250 C, KAWASAKI KLX230, KAWASAKI KLX300R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KTM 125 EXC SIXDAYS, KTM 250 GS, KTM 250 XC-W
Cost-effective
Replaced with SUNSTAR Chain after 15,000 km as the OEM Chain had outgrown it.
The front and rear Sprockets were also replaced with Kawasaki OEM at the same time.
The effect of replacing the Chain, which had been fully extended, is that it is able to transmit power very smoothly.
We recommend this product as it is more cost-effective than other companies' ChainManufacturer products.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250, HONDA XR250 BAJA, HONDA DEGREE, HONDA XR250Motard, HONDA CB300R
Front sprocket15T CB250R
HONDA CB250R's NORMAL is 13T, but we changed it to 15T because we have to turn the Engine on the highway. No modification is required and it can be installed with Bolt On.
No readjustment of the speedometer is required.
With the NORMAL 13, the Meter display showed 88 km/h even at a GPS speed of 80 km/h, which is about 10% higher. However, after replacing the front sprocket with a 15T, the GPS speed and Meter speed are now almost identical.
I expected to see an increase in distance in terms of fuel consumption, but the higher GEAR ratio and higher engine load offset this increase. However, the higher GEAR ratio and higher engine load offset the increase in speed, and fuel consumption was essentially unchanged from the time when the engine was in NORMAL 13.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250, HONDA XR250 BAJA, HONDA DEGREE, HONDA XR250Motard, HONDA CB300R
15T Front sprocket (SUNSTAR)
Changed from standard CB250R Sprocket to 15T.
The change was made because there was not as much first gear extension as expected and because it would soften the embrittlement.
It was not as effective as expected, but there is a sense of improvement.
The HappyMeter error of the speedometer has also been reduced, and it feels closer to the actual speed.
The replacement work was planned to be done by himself, but was carried out by Shop due to other consultations.
As a result, I am glad I asked for help. If I had done the work by myself, I would have had a hard time fitting the Chain Guard, etc.
View detail
Fits: KTM 690 DUKE, KTM 600 INCAS, KTM 600 ER, KTM 500 EXC SIXDAYS, KTM 500 EXC, KTM 350 GS, KTM 300 XC-W, KTM 300 EXC ENDURO, KTM 125 EXC SIXDAYS, KTM 250 GS, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, SUZUKI GSR250, YAMAHA WR200R, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC
It was easy to do.
The instructions on the box were easy to understand and I didn't have any hesitation in doing it even though it was my first time to replace the Chain! View detail
Fits: SUZUKI DR500D, SUZUKI DR350S, SUZUKI DR200SE, HONDA NC700XD DCT, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NS125F, HONDA XL200RC, HONDA XL500R, HONDA XR350R, HONDA XR500R, HONDA XRX200R, HUSQVARNA TC610, KAWASAKI KL250 A, KAWASAKI KL250 C, KAWASAKI KLX230, KAWASAKI KLX300R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Chain of SprocketManufacturer
We are already using SUNSTAR's Sprocket and Brake Disc.
I was curious about this since Chain was Released.
Speaking of Chain, EK, RK, and DID are the 3Manufacturers.
All were used.
I DID have the best of both worlds.
Purchased to try if I wanted to become a fourth ChainManufacturer.
It is less expensive than other 3Manufacturer.
I have already Converted from 525 to 520, so I bought 520-112.
What is different from the other three manufacturers is the thickness of the seal.
When I try to exchange them by connecting them with Tie Wrap, the widths do not match and I can't connect them. The roller widths are the same since they are the same 520.
I skipped 1 LINK and gave it a lap.
Included Parts:Crimp pieces, Seal and Grease.
Some Manufacturers do not come with Grease, which is appreciated.
However, this grease is hard. It is hard to wipe off excess grease.
Chain Cut & Crimp tool for crimping and crimping is the same process as the others.
After assembling, the seal is still thick. I feel uncomfortable when I lubricate it.
Are you sure you want to do this?"
The 520 is limited to 800cc, so ninja1000 is on its own.
I'll replace it with something different when I get tired of it anyway.
I am satisfied with the appearance immeChain.
View detail
Fits: KTM 690 DUKE, KTM 600 INCAS, KTM 600 ER, KTM 500 EXC SIXDAYS, KTM 500 EXC, KTM 350 GS, KTM 300 XC-W, KTM 300 EXC ENDURO, KTM 250 GS, KTM 125 EXC SIXDAYS, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, SUZUKI GSR250, YAMAHA WR200R, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC
Beautiful …
Looks great, I like it as a One point custom feel. View detail
Fits: KTM 690 DUKE, KTM 600 INCAS, KTM 600 ER, KTM 500 EXC SIXDAYS, KTM 500 EXC, KTM 350 GS, KTM 300 XC-W, KTM 300 EXC ENDURO, KTM 250 GS, KTM 125 EXC SIXDAYS, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, SUZUKI GSR250, YAMAHA WR200R, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC
cool
I wanted to try Plating since the OEM has gone Rust, so I decided to go with this Gold chain.
I live near the ocean and it's been a month and it's rust free!
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB300R
Sprocket is also Quantity at the time of Chain exchange.:Set!
Sprocket is also Quantity at the time of Chain exchange.:I'd rather have it at the Set!
So, from the beginning, the three-point Quantity:Buy this product that is Set.
Sprocket is also Duralumin Gold color and looks luxurious.
It's a lot cheaper than buying Front separately, and the next time you need to replace it, this Quantity:I am going to buy Set.
View detail
Fits: HONDA DEGREE, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250 BAJA, HONDA XR250, HONDA CB300R, HONDA XR250Motard
SUNSTARFront drive sprocket
It was quite expensive, but I bought it because my DID non-seal chain started to stretch.
It's expensive, but it's pretty good. I hope it is as durable as it looks.
Chain, Sprocket, Tire, etc., will have a short lifespan if they are cheap CHINA or non-seal Chainetc. with low cost, so in the end, you will lose money by buying cheap.
View detail
Fits: SUZUKI DR500D, SUZUKI DR350S, SUZUKI DR200SE, HONDA NC700XD DCT, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NS125F, HONDA XL200RC, HONDA XL500R, HONDA XR350R, HONDA XR500R, HONDA XRX200R, HUSQVARNA TC610, KAWASAKI KL250 A, KAWASAKI KL250 C, KAWASAKI KLX230, KAWASAKI KLX300R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
Double the Parenthesis with Logo!
I had been using SUNSTAR's Sprocket as my standard chain, but since the chain was RK, I decided to take this opportunity to use SUNSTAR. I'm sure it's not SUNSTAR's own product, but it's an OEM product, and I'm relieved to know that the drive train is made by one manufacturer at a standard price. If you look closely, you can see the SUNSTAR logo on the piece, which is very cool, and the brake disc is also PremiumRACING, which makes it even more SUNSTAR! (Lol) I recommend it for its custom look and feel. View detail
Front and Rear Sprocket Chain Replacement
It is light and the movement is Smooth. View detail
Fits: HONDA CRF250L, HONDA CB250R, HONDA CBR250R, HONDA AX-1, HONDA CRF250M, HONDA CRF250RALLY, HONDA DEGREE, HONDA XR250, HONDA XR250 BAJA, HONDA CB300R, HONDA XR250Motard
In search of low-speed Power
XR250 (MD30) 97 years old standard SprocketFront13, Rear40 changed to Front12, Rear42.
The low-speed 1st and 2nd gears are now easier to use in Course and Race.
Now I'm thinking of making the Rear about 44 or 46, but I can't do it because the Normal chain guide might hit it.
Can someone please tell me what's going on?
View detail
Exchange with Chain
In conjunction with the Chain replacement, I replaced it with something a little lighter.
The work is commissioned to Shop.
The color of the Chain is Gold, and when I installed it, I was happy with the sense of unity.
It was also a deciding factor for me to get the best price in Sale.
View detail
It's light.
You can surely feel the smoothness from the start to the high speed because the chain was also changed to the lightness and the goodness of the accuracy that are the sales.
After that, the life span due to wear will determine the overall satisfaction.
View detail
Fits: HONDA CRF250L, HONDA CB250R, HONDA CBR250R, HONDA AX-1, HONDA CRF250M, HONDA CRF250RALLY, HONDA DEGREE, HONDA XR250, HONDA XR250 BAJA, HONDA CB300R, HONDA XR250Motard
Further to the mountain Spec.
I dropped from 14T to 13T the other day, but I wanted to swing it further to Short, so I changed to 12T.
More powerful feeling and improved hill climbing performance
Can't wait to try it out in the mountains!
View detail
Fits: HONDA DEGREE, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250 BAJA, HONDA XR250, HONDA CB300R, HONDA XR250Motard
Acceleration has improved!
This time I changed to 13T and have been driving.
The acceleration was much better.
Looks like a good city ride!
View detail
Fits: HONDA DEGREE, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250R, HONDA AX-1, HONDA XR250 BAJA, HONDA XR250, HONDA CB300R, HONDA XR250Motard
Acceleration-oriented Setting
CRF250L I installed it on my MD47.
I lowered the setting from NORMAL 14T to 13T with emphasis on acceleration.
I have to admit that I didn't know much about it yet, as I only test drove it around my neighborhood, and it's a residential area, so I couldn't fly it at all.
However, 2nd and 3rd gears seemed to be easier to handle.
I'll have more imprecations when I get to the mountains and try them out!
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB300R
Quantity:Set is cheap
I like Driven Sprocket by SUNSTAR and Quantity:I bought it as a set. The DrivenSprocket is light and I like the color Champagne gold, not too flashy. The color of the Chain is Silver and it matches the color of the Sprocket. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB300R
Chain squeal is improved to Large width!
My CB250R has always been CHALYCHALY because of chain squeal. I asked a motorcycle shop to do the work, but I think it is easy to install because it is the same 108LINK as OEM. View detail
Fits: KTM 690 DUKE, KTM 600 INCAS, KTM 600 ER, KTM 500 EXC SIXDAYS, KTM 500 EXC, KTM 350 GS, KTM 300 XC-W, KTM 300 EXC ENDURO, KTM 250 GS, KTM 125 EXC SIXDAYS, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, SUZUKI GSR250, YAMAHA WR200R, DUCATI 600 SS, HONDA CB250R, HONDA CMX250, HONDA NC700XD DCT, HONDA NS125F, HONDA XL200RC
It's light but a little…
At first I used the OEM Driven Sprocket, but no matter how much I adjusted the chain, it still made a rattling noise, so I replaced it with the SUNSTAR Driven Sprocket.
After the replacement, there is no soundproofing rubber, so there is a Vienna sound, but the clattering sound has disappeared.
View detail