Reviews
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
Fits: HONDA Forza300, APRILIA SRV850, BMW C650 GT, HONDA INTEGRA, HONDA Silverwing GT400, HONDA Silverwing GT600, HONDA phase, HONDA foresight, HONDA Forza Si, HONDA Forza Z, HONDA fusion, KAWASAKI Epsilon 250, SUZUKI Sky Wave 250 Type M, SUZUKI Sky Wave 250 Type S, SUZUKI Sky Wave 250 Limited, SUZUKI Sky Wave 400 Type S, SUZUKI Sky Wave 400 Limited, SUZUKI Sky Wave 650LX, SUZUKI Sky Wave SS, YAMAHA TMAX 500
Cover is consumable! I replace it after 2 years.
I always use two layers of cover. The first one is just size, and I put Oversize over it. We recommend LETSCover, which is heat-resistant and flameproof spec! View detail
Fits: HONDA Forza300, YAMAHA MAJESTYS, Others Φ22.2 for Pipe Handlebar, HONDA glom, HONDA FORZA-SI
For vibration reduction
Easy to install and ideal for groms Size
Price is high but reliable Manufacturer is the deciding factor.
View detail
Fits: SUZUKI DR-Z400, SUZUKI ST250, YAMAHA YB125, YAMAHA VOX, YAMAHA TW225, YAMAHA TW200, HONDA Smart Dio, HONDA CB1100, HONDA CB900, HONDA NC700X, HONDA XR250, HONDA CRM250, KAWASAKI ZRX400, SUZUKI ADDRESSV125 , SUZUKI ADDRESSV125 , SUZUKI ADDRESS110, SUZUKI ADDRESSV100 , SUZUKI LETS5 , HONDA X11, HONDA JOKER50
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Fits: HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400R, HONDA CB1100, HONDA CBR1000RR-RFIREBLADE SP, HONDA CBR1000RR, HONDA CBR1000RR-RFIREBLADE, HONDA CBR1000RR, HONDA CBR1000RR, HONDA HORNET900, HONDA CB900F, HONDA CB650R, HONDA CB650F, HONDA Rebel1100 DCT, HONDA NM-4, HONDA Rebel1100, HONDA NT1100
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
Fits: HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400R, HONDA CB1100, HONDA CBR1000RR-RFIREBLADE SP, HONDA CBR1000RR, HONDA CBR1000RR-RFIREBLADE, HONDA CBR1000RR, HONDA CBR1000RR, HONDA HORNET900, HONDA CB900F, HONDA CB650R, HONDA CB650F, HONDA Rebel1100 DCT, HONDA NM-4, HONDA Rebel1100, HONDA NT1100
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Fits: YAMAHA XSR900, YAMAHA YZF-R1M, HONDA NC750X, HONDA NM4-01, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA CTX700, HONDA CTX700, HONDA FAZE, HONDA FAZE, HONDA FAZE
Reliable
I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance.
View detail
Fits: HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400R, HONDA CB1100, HONDA CBR1000RR-RFIREBLADE SP, HONDA CBR1000RR, HONDA CBR1000RR-RFIREBLADE, HONDA CBR1000RR, HONDA CBR1000RR, HONDA HORNET900, HONDA CB900F, HONDA CB650R, HONDA CB650F, HONDA Rebel1100 DCT, HONDA NM-4, HONDA Rebel1100, HONDA NT1100
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
Fits: SUZUKI GLADIUS, HONDA XR650L, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, HONDA CTX700D, HONDA CTX700, HONDA CBR650RA, HONDA CBR900RE, HONDA CBR900RR, HONDA CBX1000, HONDA CRF230L, HONDA CRF230M, SUZUKI BURGMAN 400, SUZUKI HAYABUSA, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, KAWASAKI Ninja ZX-10RR, KAWASAKI Versys 1000, KAWASAKI Ninja ZX-6RR
For the price ….
I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black.
View detail
Fits: SUZUKI GSX-R750, HONDA CBR600RA, HONDA CBR300R, HONDA CBR250RR, HONDA CBR250R, HONDA CBR1100XX, HONDA CBR1000RR-R, HONDA RVT1000R, HONDA NC750XD, HONDA NC750X, HONDA Monkey125, HONDA GROM, HONDA FORZASi, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, YAMAHA FZ6R, HONDA CB500F, HONDA CB500FA
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Fits: YAMAHA MAJESTYS, YAMAHA MT-25, YAMAHA XSR900, YAMAHA MT-09, SUZUKI GSX250R, SUZUKI GSX250R, HONDA HORNET250, SUZUKI GSX250R, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA VTR250, HONDA XR100MOTARD, HONDA PCX160, HONDA VTR250, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail