Reviews
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
NGK IRIDIUM is the best spark plug for the Honda Grom
These NGK IRIDIUM are simply the best spark plug for the Honda Grom! The NGK CPR7EAIX-9S IRIDIUM spark plug is a cooler plug than the OEM version that comes on the Honda MSX/GROM, it's better if you spend a lot of time with wide open throttle (like lots of freeway riding), besides that, it has superior longevity, better ignition and improved fuel economy. Overal, it's simply the best plug for the GROM and Webike sells them at a very good price also! View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
I think I'm feeling Torque up.
After the last replacement at 10,000Km, it was replaced for the second time at 20,000Km.
There were no glitches, and I feel like Torque has gone up in my mind.
View detail
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125, HONDA Dio110, HONDA Dio110, HONDA Dio110, HONDA ZOOMER-X, HONDA LEAD110 EX, HONDA ZOOMER-X, HONDA LEAD110 EX
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
A better throttle pipe for the GROM!
This is an improved throttle pipe from KITACO for the Honda MSX/GROM. It makes a slightly quicker throttle response (around 10%) which is ideal for the street use and not not as much as an racing quick action throttle. It's a good priced part and as usual from KITACO, a very good quality one. View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI KLX250, KAWASAKI ER-6, KAWASAKI ER-4n, HONDA MONKEY, HONDA ZOOMER, HONDA XV1000V, HONDA XR50 MOTARD, HONDA XLR250R, HONDA XLR250BAJA, HONDA X4, HONDA VTR1000F, HONDA SL230, HONDA PCX, HONDA PCX150, KAWASAKI ZXR750, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
OEM same etc., inexpensive and good.
It was used for the second Exhaust System removal and installation.
The texture was almost the same as OEM.
Since it is Gasket, the feel is comfortable.
Quantity:1 Set of 2pcs. so it is also cosmetically pleasing.
View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Effective in rainy weather and midsummer
[How is it used?
In use on NMAX 155.
When I ride in the rain, the seating surface gets very wet, so a friend of mine recommended that I purchase one.
Was the installation difficult?
It's very simple
Simply follow the instructions in the Instruction Manual to cover the Seat and fasten the back of the Seat with Magic tape.
The markings are also provided so that the front and back will not be installed backwards.
How was your experience with it?
I got lucky (?) the day after I installed it. It was a rainy day, but it worked!
The ride was comfortable with no uncomfortable wetting of the seating surfaces.
The improved ventilation will also reduce the heat of the Seat in mid-summer, which we will experience a little later in the year.
There is no movement of the mesh cover during driving, which is good.
[Was there anything that disappointed you?
It's not a disappointment, but I can't wipe the Seat without removing it each time, so it looks like it will get dirty inside if left unattended to some extent.
Perhaps due to the Belt fastening at the back of the Seat, closing the Seat now requires more force than before.
View detail
Fits: YAMAHA WR250R, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CB400SF, HONDA CBR1000RR, HONDA CB1100, YAMAHA CYGNUS X, YAMAHA Majesty-S, YAMAHA NMAX, YAMAHA WR155, YAMAHA WR155R, YAMAHA WR250X, HONDA Dax70, HONDA Dax125, HONDA APE100, HONDA PCX, HONDA PCX150
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
Fits: HONDA MONKEY125, HONDA LEAD125, HONDA ZOOMER-X (ZOOMER), HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XL230, HONDA Sh mode (MODE), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, HONDA PCX HYBRID(Hybrid), HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Good quality front fork dust seals!
These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
This is a satisfactory product
I purchased it as a replacement for the genuine Yamaha Bolt 950.
It feels much more lively than the genuine product and is expected to be advantageous in fuel efficiency.
The price is a little expensive, but I think it's not bad if it lasts longer.
I plan to purchase it again next time. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Yamaha Bolt 950. It feels much more lively than the genuine product and is expected to be advantageous in fuel efficiency. The price is a little expensive, but I think it's not bad if it lasts longer. I plan to purchase it again next time. Powered by Google Translator
View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
OEM same etc.
Quantity:1 Set of 2pcs. to Spare when returning to OEM.
It's good enough
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX eHEV, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM
Good!
[How is it used?
Purchased because there was no bar to install the Smartphone Holder.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Just tighten with a Hexagonal Wrench. It was easy.
How was your experience with it?
I have had no problems at all and it has been good to use.
[Included Parts:were they on?
Included Parts:itself was not originally there. No problem.
[Was there anything that disappointed you?
None
View detail
Fits: HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA GROM125, HONDA PCX150, HONDA WW150 AC
Light bulb for license plate
Light bulb for license plate Honda Lead 125, 2015. Fits into place. Goods match the description. I recommend for purchase. I ordered it in Almaty, it arrived in 2 weeks. -------------------------------------------------- -------- Light bulb for license plate Honda Lead 125, 2015. Fits into place. Goods match the description. I recommend for purchase. I ordered it in Almaty, it arrived in 2 weeks. Powered by Google Translator View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail