KIJIMA Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

Grip Heater GH10 with Built-In Switch Grip Length 120mm

KIJIMA

14 Feb 2024

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R

Japanese Webike user

4/5

Useful for cold season commuting

[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem. View detail

KIJIMA

06 Feb 2024

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

5/5

Required for Northeast Number.

The grip is so thin and natural that you don't even notice it has been replaced. View detail

KIJIMA

04 Feb 2024

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

4/5

I am very grateful for this season!

My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.

Having said that, I have been able to spend this winter more comfortably than if I had nothing on! View detail

KIJIMA

28 Jan 2024

Oil Filter

Fits: YAMAHA XSR900, YAMAHA YZF-R1M, HONDA NC750X, HONDA NM4-01, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA CTX700, HONDA CTX700, HONDA FAZE, HONDA FAZE, HONDA FAZE

Japanese Webike user

5/5

Reliable

I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance. View detail

KIJIMA

23 Jan 2024

BLAZE Breeder Dust Cap

Fits: SUZUKI GLADIUS, HONDA XR650L, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, HONDA CTX700D, HONDA CTX700, HONDA CBR650RA, HONDA CBR900RE, HONDA CBR900RR, HONDA CBX1000, HONDA CRF230L, HONDA CRF230M, SUZUKI BURGMAN 400, SUZUKI HAYABUSA, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, KAWASAKI Ninja ZX-10RR, KAWASAKI Versys 1000, KAWASAKI Ninja ZX-6RR

Japanese Webike user

3/5

For the price ….

I bought this because I changed the front and rear Calipers to Gold and wanted to have a consistent color.
Well, I believe it is less likely to deteriorate because of that….
Matching with GoldCaliper was a disappointment. I still think it would have been better to leave it in Black. View detail

KIJIMA

05 Jan 2024

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

3/5

More than I expected…

I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.

Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.

The bad:Not as hot as expected. View detail

KIJIMA

26 Dec 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

5/5

On a 2011 CBR600RR.

I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation. View detail

KIJIMA

16 Dec 2023

VANS x CULT Collaboration Grip 7/8-inch

Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X

Japanese Webike user

4/5

Fashion.

Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^. View detail

KIJIMA

15 Dec 2023

Grip Rubber

Fits: Others , HONDA CB1100SF, HONDA CB125R, HONDA CB1300 SUPER FOUR, HONDA CB1300SB, HONDA CB1300SF, HONDA CB150R, HONDA CB223S, HONDA CB250F, HONDA CB250R, HONDA CB300F, HONDA CB300R, HONDA CB300R, HONDA CB400SB, HONDA CB400SF, HONDA CB600F, HONDA CB650F, HONDA CB650R, HONDA CB900F, HONDA CBR250R

Bac Ha

5/5

easily control the throttle

I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail

KIJIMA

11 Dec 2023

Oil Filter

Japanese Webike user

3/5

Very ordinary Oil Filter

It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it. View detail

KIJIMA

25 Nov 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

5/5

Grip heater refill

I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter. View detail

KIJIMA

24 Nov 2023

VANS X CULTCollaborationGrip 7/8"Inch

Japanese Webike user

1/5

Defective item

It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price. View detail

KIJIMA

21 Nov 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

NO NAME

5/5

Add on to Clamp on heated grips

Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail

KIJIMA

20 Nov 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

4/5

Easy to install, better than ManufacturerOEM

The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material. View detail

KIJIMA

14 Nov 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

blackdragon

5/5

very good. This is excellent in finish and quality

There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail

KIJIMA

11 Nov 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

4/5

Already the third one.

Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail

KIJIMA

16 Oct 2023

Grip Heater GH10 with Built-In Switch Grip Length 120mm

Japanese Webike user

4/5

Wiring is Limit...in a way it fits.

This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch. View detail

KIJIMA

04 Oct 2023

Oil Filter

Japanese Webike user

5/5

The best students everywhere.

[How is it used?
Distance:every 6,000 km (every 2 oil changes), a little earlier after circuit driving.
. I think I've replaced more than I can count on one hand.
Oil used is 0W-30 at the bottom and 15W-50 at the top. 10W-40 is basically used.

How was your experience with it?
Although we continue to use filters with Magnet, we could not feel the difference between them and filters without Magnet because we immediately throw them away when we replace them.
The same Filterenchi as the OEM could be used without modification, and there was no additional tooling to purchase.
The O-rings at the mounting points need to be lubricated with engine oil before installation, which is a more time-consuming process than OEM.
I have not checked the internal structure, but I don't think it is suspicious because there is no Engine trouble caused by Oil.

How did it compare to other products?
YAMAHA 5GH-13440-50 (https://www.webike.net/sd/25727395/):The price of this product seems to be higher than that of Image because of the magnet, but for some reason, this product is cheaper. As mentioned above, I think the O-ring came with Grease from the beginning.
K&N KN-204 (https://www.webike.net/sd/9396257/) or (https://www.webike.net/sd/19861663/):Less hassle than this product because it can be replaced without the need for a filter wrench. Magnet is also available only with this product. Price is even higher than OEM.

[Points to note]
I think it's only to apply oil to the O-ring. Since the OEM has been using it far more than the OEM, there is no particular Trouble with it.

It is a strange product that is priced lower than OEM despite having magnet, but it seems to have enough performance to catch the large portion of the R6 that has been running for almost 70,000km. View detail