Reviews
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
Fits: HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA Forza300, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAZ, HONDA FORZAX, HONDA FORZAX, HONDA FORZAX, HONDA FORZAX, HONDA FORZASi, HONDA FORZASi, HONDA FORZAS, HONDA FORZAS, HONDA FAZE, HONDA FAZE, HONDA FAZE TypeS, HONDA Silver wingGT600
subtle
I received it and tried to replace it, but I was worried that the pad pin might break off because it was so tight. I thought there might be a problem with the motorcycle body, but the Caliper was already OH'd and I did some chamfering and firring, but it did not improve the problem. I tried chamfering and firring, but it didn't improve the problem. The cause of the problem was the pad, because I didn't see any drag with a Japanese pad of the same thickness. I trusted brembo, the manufacturer, but I was very disappointed because the accuracy of the pad was poor and it was unusable. I had checked the compatibility of the pad before purchasing it, but it was a disappointing result. View detail
Fits: HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, YAMAHA FZ-1, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA FZ-1 FAZER, YAMAHA FAZER8, YAMAHA FAZER8, SUZUKI BANDIT1250, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI SV1000 S, SUZUKI KATANA
Rear Brembo pads for Yamaha
I have been using Brembo onn all my bikes and I also recommend to others. This set are for my Yamaha Yzf R1 2017 rear but also fit other Yamaha models. Super asy to find which pads you need for your bike. Go to Brembo and put your bike details in and it shows you the item number code. Really good price and a better than I can get from here in the UK even as a full set. I always order multiple items per order and then the shipping was cost effective. I used FedEx Express and the order was delivered to my door within a week.all items in the order were packaged really well and any spaces in the outer box wee filled out with extra padding. The pads came in their own packet which was sealed. These pads are just awesome. These will make you stop far better than some other brands in the same price range. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic. View detail