Reviews
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
The construction is too crude to use as it is.
I bought it at the end of last year with the intention of trying things out.
I was planning to assemble it before spring, but I am hesitant to use it because of the messy construction as shown in the pictures.
Throttle boty, Inlet, everything needs to be fixed.
This guy is High SoloSpec.
There is no mention of this in the product description.
A pledge! This kind of thing is what they make you write before you buy.
I have no idea what they are thinking or what their intentions are.
View detail
So bad
Unfortunately, the Pin was in the wrong position and could not be installed. It was a waste of time. View detail
leak out of Oil
Oil leaks from O-ring between Cylinder and Case. View detail
The carburetor leans too far forward.
The carburetor is tilted too far forward, the oil level is not stable, and the Rubber is not durable. View detail
ts50
It was supposed to be a suitable product, but it doesn't fit at all.
Gasket torn.
View detail
Fits: SUZUKI DR250S, SUZUKI DR250S, SUZUKI GSF1200, SUZUKI GSF750, SUZUKI GSX-R250/R, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX400, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI TS125R, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI DF125 DJEBEL
SKYWAVE (CJ42A) Drain bolt
SKYWAVE (CJ42A) Motorcycle shop says SEA BASS Frequently Asked Questions This was the case View detail
Questionable durability
It's a problem because it falls apart after just a little bit of putting it on and taking it off, and the price is relatively high.
I'm trying to think of other options, as they are essential.
View detail
Poor.
I bought it because I thought it was cheap and good that the tip could be replaced.
The downside of the tip replacement is that it often hits too many areas and cannot reach tight spots.
The C-ring is so hard that the tip is useless because it is wobbly.
At any rate, I can't RECOMMENDATION because there are so many irritating POINTS.
We managed to finish the work, but it was a Level we never wanted to use again.
Tools are Large stamps.
View detail
Overflow won't stop.
When I installed it and turned on the Cook, it was sloppily Overflowing.
Float valve and Float seem to be incompatible.
It appears that the Float and Float valve need to be replaced.
View detail
Too soft.
After applying the film, I tried to lightly push out the air bubbles with my fingernail to release them, but the film was clearly scratched. View detail
worst case scenario
No good, useless after 2 or 3 removals. View detail
No durability
I've opened and closed it twice for setting and it's useless. View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
Used for SUPER CUB 110PRO
I bought this to improve my re-grip, but was suddenly disappointed with the same diameter as the OEMNORMAL Throttle, what is High Solo about this?
I was expecting this because it is a Manufacturer of Aftermarket parts that I often see, but I got the same impression as if I had grabbed a Chinese-made Inchki product.
Was KITACO such an InchkiManufacturer?
Instead of recommending them to my friends, I vowed never to buy KITACO products again.
View detail
Fits: SUZUKI WOLF50, SUZUKI TS50HUSTLER, SUZUKI RG50
I'm so sorry
The Engine was ruined after about 6 hours of operation. Lead Valve cannot be replaced without removing the cylinder from the TS50, so I do not recommend this product. View detail
unsuitable
It says that the pedal is suitable for DAX125, but the Bolt diameter does not match the OEMBrake pedal and it cannot be installed on the pedal.
I forced myself to widen the hole with Drill and installed it.
View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
This is disappointing to KITACO.
Material is also terrible.
What is wrong with KITACO these days?
Disposal.
View detail
![[K・TOUR] Center Carrier](https://img.webike-cdn.net/catalogue/images/107660/80-539-147011_1_TS.jpg)
Maintainability will be poor.
The mounting position behind the Right Side is poor, and access to the Battery is extremely poor. I cut off the bracket behind the Right Side because I am not a car carrier that uses a lot of load. View detail
Spring is too hard.
Used with AXIS 90
Spring is too stiff for 2 passengers.
Weight 80kgPre-road not sinking even when used at its weakest, Damper cannot be used effectively.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Compatible with SEA BASS cars?
When I bought a SCProject Slip-on Silencer from Webig, I searched for Gasket as well.
Motorcycle is GSXS1000 (22) It is
Search by Car Type Also, this product was a hit on the Slip-on Silencer's product page. Gasket is here. Tap it and you'll get a hit on this product. 。
However, the product is actually not usable when replacing Slip-on Silencer.
Because it is for the exhaust pipe assembly (before the catalyzer), the size does not fit.
Slip-on Silencer can help you After Catalyzer." You have to look for it in the "Search by car type" section, but it doesn't show up in the search by car type!
The piping size of the Silencer section of the GSXS1000 is
On the Catalyzer side Φ49
It is Φ54 on the OEMSilencer side.
So, I believe the model number is JPS4. For the Silencer part of the GSX1300R HAYABUSA. fits.
speaking one's mind Search for WeBig products by model. is full of holes and governed by a governor.
Gasket, which recommends when purchasing Slip-on Silencer, recommends non-conforming products that cannot be used.
View detail