Reviews
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Top Choice Bearings,oem brand
My water pump bearing was shot, so decided to replace in seals,orings and bearing.Zero issues with install. Did the freezer and heat gun method. Perfect fit! very high quality and fit awesome! Only thing i would say is to throw some more grease into them, otherwise awesome. View detail
Fits: HONDA NSR50R, HONDA NSR50R, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR
Good part
Original Honda finishing piece, new. It has a beautiful appearance. Well-crafted, careful with the details. Reliable. It appears to have good durability. I recommend her. View detail
Fits: HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500
Good part
The part is original Honda, new, and of high quality. It has the same internal diameter as some original parts on my motorcycle, but unfortunately it is very thick compared to the original 20mm sealing washer on my engine. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Good part
Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR600F3, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Fixed Bolt mounting
The Bolt used in the Bracket part of the Rear blinker was not attached due to loss, so I repurchased it.
It came with a special Bolt flat, which was helpful because it was sold at the same HondaOEM Product and not at a higher selling price.
View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CBR650F, HONDA CBR650F, HONDA CBR650F, HONDA CBR650RA AC, HONDA CB650RA AC, HONDA CB650RA AC, HONDA CB650RA AC, HONDA CB650R AC, HONDA CB650R AC
Should be sold as a set!
The product itself is fine, but I was expecting to receive both of the funnels. There is no circumstance I can think of where you would only need one side. Everyone purchasing this product would be needing two for derestriction purposes. Therefore selling them as a set would be much more rational and avoid confusion. View detail
Fits: HONDA C70, HONDA C70, HONDA CB750F, HONDA CB750F, HONDA CB750K, HONDA CB750K, HONDA Z50, HONDA Z50, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50RD, HONDA PC800 AC
Genuine product
This is 6304 bearing. This will match for various kind of motorcycles. This is manufacture by Honda made in Japan bearing. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA C70, HONDA C70, HONDA C70
Good
This is used in as a foot rest pin. This will match various kind of motorcycles.Genuine products from Honda.made in Japan. View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB750
Genuine product
This is Honda hornet 250 right side mirror. Under the mirror there is a genuine logo. good sealed mirror around boder.Genuine product from Honda made in Japan. View detail
Fits: HONDA CB550SC A, HONDA CB550SC A, HONDA CB650SC A, HONDA CB650SC A, HONDA CB650SC A, HONDA CB650SC A, HONDA CB650SC A, HONDA CB650SC A, HONDA CB650SC AC, HONDA CB650SC AC, HONDA CB650SC AC, HONDA CB650SC AC, HONDA GL1200 A, HONDA GL1200 AC, HONDA GL1200A A, HONDA GL1200A AC, HONDA GL1200I A, HONDA GL1200I AC, HONDA VF1000R A, HONDA VF1000R A
New Fuse
The fuse for the installed product ran out, so it was replaced with a new one.
It was a Single Item, HondaOEM Product fuse and not too expensive.
Since it is a Fuse, it could be any Manufacturer's, but the selling price of Single Item, as a HondaOEM Product, is cheaper.
View detail
Fits: HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F AC, HONDA CRF150F A
Fuse
7.5A Flat Type Fuse.
It is sold by HondaOEM Product, and for some reason, HondaOEM Product's Fuse is cheaper than those sold as Single Item outside the company.
For Single Item purchases, this HondaOEM Fuse is more economical.
View detail
Fits: HONDA GOLD WING, HONDA GOLD WING, HONDA GOLD WING, HONDA GOLD WING, HONDA GOLD WING
Silver→Black
I changed the Cap from Silver to Black.
Since the body color is Black, this area stood out with Silver, so I ordered parts from '21 onward.
It's glossy Black, so we'll have to wait and see if it blends in.
View detail
Ideal for Repair Parts for Overflowetc.
[How is it used?
I have a PC20 big carburetor kit installed, but it started having problems with overflowetc., so I replaced it at the time of overhaul.
How was your experience with it?
If replaced together with other parts, such as jets and gaskets, it will restore the functionality close to that of a new one.
Of course, Overflow will also disappear.
How did it compare to other products?
Repair Parts are available from other companies, but if you can procure them from OEM Parts, this is definitely the way to go.
[Points to note]
Recently, Material:Since Plastic is Large and a half, Float made of Brass is becoming rare nowadays.
▼A slight shock can affect the oil surface, so careful handling is required.
View detail
Fits: HONDA XR250, HONDA XR250, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F A, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230F AC, HONDA CRF230L AC, HONDA CRF230L AC, HONDA CRF230M AC, HONDA NX250 A
I ordered it according to the model number on the Parts List.
Blinker lens was cracked.
If you order Lens and this Screw at the same time...
I ordered it as per the part number.
Lens also stays spindle-shaped.
Screw's are too short to be fastened with drum-shaped Lens.
Oh well. (Lol)
Spindle-shaped for a change of pace
View detail
Fits: HONDA Z50A A, HONDA CB125S A
Replace with new one
This is Change Pedal of Other Brand Product, but this HondaOEM ProductRubber can be installed, and this HondaOEM Product is cheaper than others, so it is a replacement. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
น้อตฮอนด้าแท้japan คุณภาพดีสวยงาม View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA C125, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70
Recommended replacement with Oil
[How is it used?
Every time the oil in the CUB is replaced, the washer is also replaced, so it is used frequently. I am satisfied with the replacement, but at the same time I can refresh my mood.
How was your experience with it?
It is preferable to use a torque wrench to tighten the washer to the proper torque.
How did it compare to other products?
I bought some washers with different part numbers for other Honda cars at the same time, but I can't say if they can be shared or not, because there may be slight differences in material etc. It would be better to use the one with the part number that fits to each vehicle.
[Points to note]
When tightening, it is best to work with a firm hand to get a feel for the tightening process.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Inexpensive and easy to replace each time.
[How is it used?
I did not see it listed in the compatibility chart, but I looked at the Parts List and saw that it could be used as a Drain Washer for NC42, so I purchased it. It seems that it can be used for many types of vehicles. (Owner must decide whether or not his/her vehicle is actually compatible with this product.)
How was your experience with it?
The texture of the Drain Washer is slightly different on the front and back sides due to the manufacturing process, but in my case, it did not affect my use of the product. So, we tighten the bolt by hand and visual inspection. It is better to use a Torque wrench.
How did it compare to other products?
This part of the product is OEM based. The price is also low.
[Points to note]
If the drain bolt is over-tightened, it will be irreversible, so it is better to use a Torque wrench or, if you have no choice but to work with your hands, hold the Glasses Wrench shallowly and work with only one hand.
View detail
Fits: HONDA CBX750 Police CBX750P21, HONDA CBX750P 2H, HONDA CBX750P H
It is a BlinkerBuzzer with a retro feel!
[How is it used?
The Blinker on the old car does not have a push cancellation function, so it was retrofitted to prevent the Blinker from forgetting to turn off.
Was the one you received as per Image?
The quality is as good as the Image because it is an OEM Product.
Was the installation difficult?
Easy to install, but be careful if you are not a fan of electric Wiring.
How was your experience with it?
It is a little embarrassing when waiting at traffic lights, etc. because it is quite loud, but I like it because it is Retro-like.
[Included Parts:were they on?
No other, Bracketetc. needs to be prepared.
[Was there anything that disappointed you?
Not particularly
I like the retro-chic mechanical sound of the Buzzer, although I don't see many cars with Buzzers anymore.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
Exchange with Tank Exchange
[How is it used?
When the tank was replaced, the Retainer was also replaced together.
How was your experience with it?
Since it is a plastic part, we replaced it with a new one in consideration of deterioration over time, but there was no particular deterioration observed, so it may have been a matter of oversight.
How did it compare to other products?
There is no other available product, so this will be an OEM Product as long as parts supply is available.
[Points to note]
If you pull it out with force, it will break, so you need to remove it without straining.
View detail