Reviews
precision wrench
How can I maintain my car without a precise torque wrench? The TOHNICHI torque wrench I bought on webike has a torque range of 10-50 Nm, which is enough for daily maintenance of motorcycles. TOHNICHI torque wrench is made in Japan, the precision is very standard, and the adjustment is very convenient. All in all, I am very satisfied with this shopping. -------------------------------------------------- -------- How can I maintain a car-loading car for myself? I have a precise torque wrench. I bought this Tohnichi torque wrench on Webike. The torque range is 10-50 Nm, which is enough to maintain motorcycles in daily maintenance. ToHnichi torque wrench is native to Japan, with very standard accuracy and convenient adjustment. In short, this time is very satisfied. Powered by Google Translator View detail
Maintenance essentials
Purchased because I felt the need for it for car body maintenance.
It is mainly used for oil replacement and retightening when checking for looseness of each screw in maintenance after circuit driving.
After all, I continued to not feel safe with my hands and decided to purchase the product before causing Trouble.
Calibration may be necessary for long-term use, but we will continue to buy more as needed.
View detail
feel at ease
It is a reliable manufacturer, and it is easy to use. View detail
Highly reliable
I bought it because it is necessary when tightening a motorcycle rear axle or other large torques.
The measurement range is also wide, so most things can be covered with this.
You can also set the measurement value by simply turning the Handlebar behind it.
The click feeling in that case is also easy to understand and the scale is easy to read.
Workability is high.
Since it is Tohnichi, the reliability of the measured values is high, and although it may need to be calibrated at some frequency, I believe it can be used for a long time.
One drawback is that the measured value is not available in the Quantity:I lock it with the knob behind the Handlebar when I set it.
Even if this is not tightened very hard when locked, it takes so much force that it hurts the hand when loosening it after measurement.
If only this point could be improved, I would have no complaints.
View detail
JAPAN！！
When I say Tor Crunch, I mean Tonichi.
I think it's a safe and reliable Torque wrench!
In addition to motorcycle maintenance, they are also active in car maintenance.
View detail
This is where SmallTorque is required.
I used to use Tohnichi's Torque wrench at work, and now I work at Sunday mechanic servicing MTBs, which often require more delicate Torque management than Motorcycles. Worst case scenario, I might break a part by Overtorque, so I wanted to manage it well. I would like to purchase the Large size in the future. View detail
Speaking of Torque wrench, Tonichi
This is Torque wrench of Tonichi.
Speaking of Torque wrench, it is Tonichi.
You may be tempted to look at the famous general manufacturer products such as ktc, but the exclusive manufacturer products are different in usability.
The ktc Pre-set torqueWrench has a "Knick" feel, but the Tonichi is a "Pushin".
It's hard to tell from the text, but it's totally different when you compare them.
In the meantime, if you buy this 40-200 for LargeTorque, you won't have much trouble.
Also, if you have a 5-40 for SmallTorque, you'll never have a problem with motorcycle maintenance.
Stoicism is sure that both ends of Range have a precision of … so, with the above combination, it is somewhat uneasy around 40N?m used so-so, but …
However, if it is a Sun Machine Level that is not sent out to be calibrated at all after purchase, there is no doubt that maintenance can be carried out with a sense of security that cannot be compared with hand-locked management, so I think it is no problem.
If you're looking for a "good Torque wrench", this is definitely the way to go.
View detail
Safe to use
of the sameSeries MTQL40N (5 to 40 N・m) for this purpose.
I was using another company's Digital torque wrench before, but I was worried about the accuracy of the wrench because the torque value rarely moved even though I was tightening it, so I switched to Tonichi.
This is especially useful for the 5-40 where accuracy is needed, as there are many places where it is used on a Motorcycle.
The Torque adjustment is easy and the Click feeling is pleasant to use.
However, there is a point where there is no choice because the Torque wrench itself is compact, but the main scale is small, and the secondary scale is black on a chrome ground, and the character is too thin and it is a little difficult to see.
View detail
This is good. Really.
I bought this to use for bolts that need to be tightened at a certain level, such as DrainBottle and Sprocket, and for bolts that might be damaged if they are tightened too much. I'm not sure if it's a good idea or not. It is expensive. It's better than buying something cheap. View detail
Made by Tonichi, the man of my dreams!
When I say Torque wrench, I mean it's made by Tonichi!
You can't go wrong with things.
Torque management is a Large cut!
This is a Recommendation. ♪
Note that the Case in the picture is sold separately!
View detail
I use it a lot for Brake line.
[How is it used?
In use for about 3 years.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When I changed the brake line, I couldn't tighten it with the normal torque wrench, so I came across this Torque wrench with replaceable head after a lot of research. I have to buy the opening head of the size that I don't usually use, so the interchangeable type is convenient.
The torque adjustment range is 5-25Nm, which is low, but it has a wide range of applications such as Clamp bolt, Brake fitting, BridgeBolt of Brake Caliper.
[Points to note]
This is a precision tool, so please do not drop it on a hard floor.
How did it compare to other products?
There are many Torque wrenches out there, but Tohnichi is the best.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Purchased for Torque management.
I bought it to manage Torque in various places.
It's 10-70Nm, so it's just the right setting for the NSR50.
It's a little expensive, but I think it's better to choose the highly accurate Tohnichi Torque wrench from the start than to make a mistake with a cheap one.
View detail
Joining the GROM maintenance tools
It joins the ranks of tools that come in handy when servicing the GROM.
I purchased the Tohnichi Torque wrench, which is a torque wrench for motor sports with a measurement range of 10 to 70 N・mSpec. "Cochine. The Torque setting is also easy to understand. The Body is the main scale and the Handlebar is the secondary scale, and as the torque increases, the Handlebar becomes harder (heavier), but that is the spec. This is the difference between the Torque wrench for motor sports and the regular Tohnichi Torque wrench. Would it be better to have a Case for storage?
From now on, I want to use both KTC's Digital ratchet and Tohnichi's Torque wrench. I think Tohnichi's Torque wrench is easy to use especially for suspension.
View detail
Reliable JAPAN
Ideal for oil changes and Torque management of Bolt M6 to M14Bolt for Others exterior relations.
This 10-50Nm is good, especially since I don't do wheel/drive related stuff that requires high Torque.
It is a safe JAPAN and seems to be accurate.
View detail
It can be used normally
I bought them to tighten the Axle Shaft on the Motocrosser and to tighten the pipod on the Swing Arm.
The box for storage that comes with it is quite large because it is the one that corresponds to One sizeLarge wrench as you can see in the photograph of the product introduction.
The Instructional Manual is carefully written, but it is thin and easy to read, and has a torque conversion table and a Volt standards table.
The external appearance of the Wrench is clean and easy to clean because of its plating. The handle part has a uniform Knurl process and the sub-calendar has a Large protrusion so that even slightly greasy hands can be used to set the torque. It's a bit of a hassle to rotate DrumstickDrumstickDrumstickDrumstick and the sub-calendar while looking at a small memory.
In terms of actual use, the upper limit of 140N is long enough for the average male to tighten. The resistance to rotate the sub-calendar is of the Large texture, so if you tighten the rocker lightly, it will not rotate during use. When the torque reaches the set value, please check the following "Pushin' and the sound of the hand. The Wrench snapped. The Right/Left rotation switch is light but gives you a solid click feeling and a secure stop.
The Ratchet function is quiet. Also the angle is typical. We have kept it in an indoor toolbox and so far there is no rust at all.
In the Instruction Manual, it is written that you should not work with a conversion adapter etc. to use 12.7sq. or smaller sockets, but most of the sockets I have are 9.5sq. Therefore, [KTC:KTC 12.7sq.. Socket Adapter Item #:BA43] for purchase and use. I haven't had any problems in my personal use. Please install at your own risk regarding this one.
View detail
super standard
Not this one, but I'm using MTQL40N, and Torque wrench is There is no doubt that TONICH. This is a manufacturer that pursues the idea of fastening. Metal handles are the best tools to use for maintenance. It's often [Color] If you are not careful with the clear window, it may be fogged up by Gasoline adhesion. Also, plastic handlebar will inevitably deteriorate (sticky or cracked). Also, the plastic handlebar will inevitably deteriorate (sticky and cracked). For what it's worth, all metal on the outside is the best when viewed in terms of environmental resistance requirements and aging. View detail
Torque adjustable-range 10~50 N-m Range exactly good for maintenance of a MONKEY. In the rest, OK. setting out is [ that it cannot respond in this range ] all コクンッ when it becomes the Torque carried out at least at the Stainless of a S
Torque adjustable-range 10~50 N-m Range exactly good for maintenance of a MONKEY.
In the rest, OK.
setting out is [ that it cannot respond in this range ] all コクンッ when it becomes the Torque carried out at least at the Stainless of a Steering! ていう Signal sound is pleasant.
View detail